* commit '18019f8cb9663dd1032c65aa453eaec18d641905':
FATE: add an H.264 test with unescaped extradata
FATE: add an H.264 test with invalid reference lists
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'd12b5b2f135aade4099f4b26b0fe678656158c13':
build: Split test programs off into separate files
Some conversions done by: James Almer <jamrial@gmail.com>
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Also temporary enable the test so we get updated fate failure statistics
Note, this does not work on all platforms, it fails on MIPS
and ml archives indicate it failed on x86 openbsd with some compilers as well
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is impossible to pass "aspect" parameter to encoder from ffmpeg CLI
because option from lavc/options_table.h is eclipsed by option with same
name in ffmpeg_opt.c, which has different meaning (DAR, not SAR).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also, make every addition except for sidedata part of version 1 instead of the
new version 2.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '11843ededacd0157aea642771837557549b5b417':
fate: Add separate target for all indeo3 tests
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'b39ab8549a53e2fc7978ab9db50e5c2ba6a6602d':
fate: Add test for indeo2 with delta frames
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The current sample comes from an older version of the codec, which
supports a single output mode, so rename it accordingly.
Add tests for the new pixel formats.
No new reference samples are needed for this as the file already exists
for testing the bitstream filter
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
- Check if av_display_rotation_get() gets the correct degrees
- Check if av_display_rotation_set() sets the correct matrix
- Check if av_display_matrix_flip() changes correct the matrix
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
FATE tests have been updated to patch. They do not differ in
any meaningful way.
* commit 'dc6527ed908e4d330738f139074455ffbe56a2de':
nutenc: do not use AVCodecContext.frame_size
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
The timebase change in the zmbv-8bit test is due to the fact that
previously the timebase string was evaluated as floating point, then
converted to a rational. After this commit, the timebase is passed
directly as is.
The parser only parses the core, and thus has a duration relative
to the core sample rate only, not the actual stream sample rate.
FATE references changed due to now correct timestamps.
This commit fixes the lack of palettized display of 1-bit video
in the qtrle decoder. It is related to my commit of
lavf/qtpalette, which added 1-bit video to the "palettized video"
category. As far as I can see, everything works fine, but comments are
of course welcome.
Below are links to sample files, which should now be displayed properly
with bluish colors, but which were previously displayed in black &
white.
Matroska:
https://drive.google.com/open?id=0B3_pEBoLs0faNjI0cHBMWDhYY2c
Earth Spin 1-bit qtrle.mkv
QuickTime (mov):
https://drive.google.com/open?id=0B3_pEBoLs0faUlItWm9KaGJSTEE
Earth Spin 1-bit qtrle.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes Ticket #5032
The samples in Ticket #5032 is using \r\r\n as line breaks. Since we
already are handling \r, or \n, or \r\n as line breaks, \r\n\n will be
considered as a double line breaks. This is an issue because
ff_subtitles_read_text_chunk() will as a result stop extracting a chunk
after just one line.
So instead of parsing the SRT by "chunks" (which means splitting every
double LB), this new parser is detecting timing lines, and split the
events on this basis. While this sounds safe and simple, it needs to
take into account the event number preceding the timing line while
handling situations such as:
- event number starting at 0 or actually any number instead of 1
- event numbers not being ordered at all
- event number being followed by text garbage (this really happened,
see Ticket #4898)
- event payload containing one or multiple number (a protagonist saying
a count-down, a date or whatever) which could be confused with a
chapter number
- event number being empty (see Ticket #2167)
- all kind of weird line breaks can appear randomly like wild pokémons
- untrustable line breaks (Ticket #5032)
The sample madness.srt tries to sum up most of this into one sample,
ticket5032-rrn.srt is the file containing \r\r\n line breaks. and
empty-events-2167.srt contains empty events.
When the interpolated value is divided by the sum of weights, no
rounding is done, which means the value is truncated. This results in
a slight bias towards dark green in the interpolated area. Rounding
properly removes the bias.
I measured this change to reduce the interpolation error by 1 to 2 %
on average on a number of sample input and logo area combinations.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '823fa7004571cb8404ca5785f9fa6e85f0f9f3d3':
fate: Rework sgi tests into a suite and add the missing ones
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '1d62ee38894afb696674db78cee8f8d89204a8fe':
movenc: Add a unit test for signaling of the track start times
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This way, it never starts with 0xFFF0, and never trips the
ADTS "Detection" code in movenc.c.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '3eeb7edfc2a1157b7b0e0ce21ac2cd44d55d405b':
movenc: Add a unit test for frag_discont with edit lists
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
All diferences in unit tests have been acounted for.
* commit '59e8ec0aa8ab174701d01a3bfe96fedd0b7fcead':
movenc: Add an API unit test for fragmenting options/calls
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
a set ost->frame_rate does not imply CFR in ffmpeg
The changed fate tests had all wrong packet durations
(like 1/1000 or 1/90000)
There might be more cases in which is_cfr could be set
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Contrary to the normal fate tests that run via avconv, this tests
nontrivial call sequences that are only doable via the API
(mainly for different corner cases when using the muxer for
segmenting).
The test muxes fake packet data (with extradata that looks
enough like proper data to make the file be viewable with e.g.
boxdumper) and checks the hash of the produced files. The test also
verifies that fragments produced via different call sequences remain
identical (to avoid e.g. updating the output hashes and suddenly
having fragments that used to be identical suddenly diverging), for
fragments written with frag_discont and/or delay_moov.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3efd71b4d0b4a73ccbbbdc092e6bbd54d92633f4':
avconv: set packet duration for CFR video streams
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Trim unneeded leading components and trailing zeros.
Move the formating code in a separate function.
Use the function also to format the default value, it was currently
printed as plain integer, inconsistent to the way it is parsed.
Similar to testsrc, but using drawutils and therefore
supporting a lot of pixel formats instead of just rgb24.
This allows using it as input for other tests without
requiring a format conversion.
It is also slightly faster than testsrc for some reason.
Signed-off-by: Steven Robertson <steven@strobe.cc>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For the 10-show-existing-frame, the source file indeed has a timestamp
of 3 (or 100/33) for the second visible frame, so the fix appears to
work correctly. For the other, only the timebase is fixed, but again
appears to be correct now.
omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev: 0.06 PSNR: 72.28 MAXDIFF: 1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Includes escapes that should now be supported and a few features not yet
fully supported, like comments, regions, classes, ruby, and lang.
All were tested with https://quuz.org/webvtt/ for validation, except
regions because the validator doesn't support them yet, and I couldn't
find any other way to validate WebVTT.
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
Currently only 2 profiles are evaluated because they are the only 2
with distributed test sequences.
- CID 1260: YUV 4:2:2 10 bits with block-adaptive interlace coding,
from ticket 4876;
- CID 1270: YUV 4:4:4 10 bits (HR), 1920x839, from ticket 4581.
They were generated from the ticket sequences by running the
following kind of command-line;
ffmpeg -i $INPUT -an -sn -vcodec copy -vframes 1 -y $OUTPUT.mov
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The sample position is made weird and non-nominal to force catching
such issues as default values or specialized operations hiding
issues in corner cases.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This introduces a slight timebase computation difference in zmbv-8bit
fate test. This is expected since the new options are double instead
of ints, and the additional precision skews the results in a non
meaningful way.
