This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
It is a really bad idea to assign a video codec id
when we have set codec_type to audio and vice versa.
Prevents detection of mp2 in mxf as mpeg2video.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This fixes 0001GL.MXF.V1.mxf_opatom.mxf and 0001GL00.MXF.A1.mxf_opatom.mxf
getting two streams each due to both using the same SourcePackageID.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Some applications use the j2c extension for jpeg2000 codestream files.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Conflicts:
Changelog
RELEASE
libavcodec/mpegaudiodec.c
libavcodec/pthread.c
libavformat/options.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Conflicts:
libavformat/Makefile
libavformat/avidec.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
* qatar/master:
rv34: add NEON rv34_idct_add
rv34: 1-pass inter MB reconstruction
add SMJPEG muxer
avformat: split out common SMJPEG code
pictordec: Use bytestream2 functions
avconv: use avcodec_encode_audio2()
pcmenc: use AVCodec.encode2()
avcodec: bump minor version and add APIChanges for the new audio encoding API
avcodec: Add avcodec_encode_audio2() as replacement for avcodec_encode_audio()
avcodec: add a public function, avcodec_fill_audio_frame().
rv34: Intra 16x16 handling
rv34: Inter/intra MB code split
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/pictordec.c
libavcodec/utils.c
libavcodec/version.h
libavcodec/x86/rv34dsp.asm
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Enhances seeking by demuxing until the requested timestamp is reached within
the segment selected by the seek code using the playlist info.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
mov: cosmetics - move a line to a better position and add a comment
Oana Andreea Stratulat submitted a similar patch to trac, but forgot
to notify the ML about it.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fate: split ADPCM and DPCM test references into separate files.
mov, mxfdec: Employ more meaningful return values.
lavc: Relax API strictness in avcodec_decode_audio3 with a custom get_buffer()
wavpack: fix clipping for 32-bit lossy mode
vb: Use bytestream2 functions
Conflicts:
libavcodec/utils.c
libavcodec/vb.c
libavformat/mxfdec.c
tests/fate/dpcm.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Current code would just return uninitialized data with no way
to detect this condition.
Instead, fill the whole GUID with 0 in that case.
Fixes valgrind uninitialized data errors in fate-seek-lavf_asf.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
With the added benefit that allowing -segment_list_size 0 makes it
possible to keep all segment entries in the list file.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (21 commits)
utils: Check for extradata size overflows.
ARM: rv34: fix asm syntax in dc transform functions
avio: Fix the value of the deprecated URL_FLAG_NONBLOCK
rv34: fix and optimise frame dependency checking
rv34: NEON optimised dc only inverse transform
avprobe: use avio_size() instead of deprecated AVFormatContext.file_size.
ffmenc: remove references to deprecated AVFormatContext.timestamp.
lavf: undeprecate read_seek().
avserver: remove code using deprecated CODEC_CAP_PARSE_ONLY.
lavc: replace some remaining FF_I_TYPE with AV_PICTURE_TYPE_I
lavc: ifdef out parse_only AVOption
nellymoserdec: SAMPLE_FMT -> AV_SAMPLE_FMT
mpegvideo_enc: ifdef out/replace references to deprecated codec flags.
riff: remove references to sonic codec ids
indeo4: add some missing static and const qualifiers
rv34: DC-only inverse transform
avconv: use AVFrame.width/height/format instead of corresponding AVCodecContext fields
lavfi: move version macros to a new installed header version.h
vsrc_buffer: release the buffer on uninit.
rgb2rgb: rgb12tobgr12()
...
Conflicts:
avconv.c
doc/APIchanges
ffprobe.c
libavfilter/Makefile
libavfilter/avfilter.h
libswscale/rgb2rgb.c
libswscale/rgb2rgb.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This isn't used in practice anywhere within libav at the moment,
but change it for consistency until it is removed.
URL_RDONLY/WRONLY were fixed in commit 5b81e29593 (after the
values that actually were used were changed at the major bump,
in commit cbea3ac8), but this flag was unintentionally left unfixed.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fft: init functions with INIT_XMM/YMM.
pcmenc: set frame_size to 0.
gsm demuxer: use generic seeking instead of a gsm-specific function.
gsm demuxer: return packets with only 1 gsm block at a time.
avcodec: add GSM parser
doc: Replace ffmpeg references in avserver config file by avconv.
doc: Fix names of av_log color environment variables.
Fix a bunch of platform name and other typos.
Add some missing changelog entries and release 0.8_beta2
No longer build libpostproc by default
wtv: fix memleaks during normal operation
threads: add CODEC_CAP_AUTO_THREADS for libvpx and xavs
Conflicts:
Changelog
RELEASE
cmdutils.c
configure
doc/ffserver.conf
doc/platform.texi
ffplay.c
libavcodec/Makefile
libavcodec/version.h
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
rv34: frame-level multi-threading
mpegvideo: claim ownership of referenced pictures
aacsbr: prevent out of bounds memcpy().
ipmovie: fix pts for CODEC_ID_INTERPLAY_DPCM
sierravmd: fix audio pts
bethsoftvideo: Use bytestream2 functions to prevent buffer overreads.
bmpenc: support for PIX_FMT_RGB444
swscale: fix crash in fast_bilinear code when compiled with -mred-zone.
swscale: specify register type.
rv34: use get_bits_left()
avconv: reinitialize the filtergraph on resolution change.
vsrc_buffer: error on changing frame parameters.
avconv: fix -copyinkf.
fate: Update file checksums after the mov muxer change in a78dbada55
movenc: Don't store a nonzero creation time if nothing was set by the caller
bmpdec: support for rgb444 with bitfields compression
rgb2rgb: allow conversion for <15 bpp
doc: fix stray reference to FFmpeg
v4l2: use C99 struct initializer
v4l2: poll the file descriptor
...
Conflicts:
avconv.c
libavcodec/aacsbr.c
libavcodec/bethsoftvideo.c
libavcodec/kmvc.c
libavdevice/v4l2.c
libavfilter/vsrc_buffer.c
libswscale/swscale_unscaled.c
libswscale/x86/input.asm
tests/ref/acodec/alac
tests/ref/acodec/pcm_s16be
tests/ref/acodec/pcm_s24be
tests/ref/acodec/pcm_s32be
tests/ref/acodec/pcm_s8
tests/ref/lavf/mov
tests/ref/vsynth1/dnxhd_1080i
tests/ref/vsynth1/mpeg4
tests/ref/vsynth1/qtrle
tests/ref/vsynth1/svq1
tests/ref/vsynth2/dnxhd_1080i
tests/ref/vsynth2/mpeg4
tests/ref/vsynth2/qtrle
tests/ref/vsynth2/svq1
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes reads of uninitialized data by the parser when running
FATE sample h264-conformance/SL1_SVA_B.264.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* qatar/master: (29 commits)
cabac: Move code only used within the CABAC test program into the test program.
vp56: Drop unnecessary cabac.h #include.
h264-test: Initialize AVCodecContext.av_class.
build: Skip compiling network.h and rtsp.h if networking is not enabled.
cosmetics: drop some pointless parentheses
Disable annoying warning without changing behavior
faq: Solutions for common problems with sample paths when running FATE.
avcodec: attempt to clarify the CODEC_CAP_DELAY documentation
avcodec: fix avcodec_encode_audio() documentation.
FATE: xmv-demux test; exercise the XMV demuxer without decoding the perceptual codecs inside.
vqf: recognize more metadata chunks
FATE test: BMV demuxer and associated video and audio decoders.
FATE: indeo4 video decoder test.
FATE: update xxan-wc4 test to a sample with more code coverage.
Change the recent h264_mp4toannexb bitstream filter test to output to an elementary stream rather than a program stream.
g722enc: validate AVCodecContext.trellis
g722enc: set frame_size, and also handle an odd number of input samples
g722enc: split encoding into separate functions for trellis vs. no trellis
mpegaudiodec: Use clearer pointer math
tta: Fix returned error code at EOF
...
Conflicts:
libavcodec/h264.c
libavcodec/indeo3.c
libavcodec/interplayvideo.c
libavcodec/ivi_common.c
libavcodec/libxvidff.c
libavcodec/mpegvideo.c
libavcodec/ppc/mpegvideo_altivec.c
libavcodec/tta.c
libavcodec/utils.c
libavfilter/vsrc_buffer.c
libavformat/Makefile
tests/fate/indeo.mak
tests/ref/acodec/g722
Merged-by: Michael Niedermayer <michaelni@gmx.at>
rtsp.h relies on network.h and the latter conditionally defines fallback OS
structures that rely on configure tests, which are only run if networking
is enabled.
This fixes various problems with getting stream info. For example playback of the
file of Ticket88. Multithreaded find_stream_info should be reenabled
once it works correctly
This partly reverts 212fd3a1f1
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flicvideo: fix invalid reads
vorbis: Avoid some out-of-bounds reads
vqf: add more known extensions
cabac: remove unused function renorm_cabac_decoder
h264: Only use symbols from the SVQ3 decoder under proper conditionals.
add bytestream2_tell() and bytestream2_seek() functions
parsers: initialize MpegEncContext.slice_context_count to 1
spdifenc: use special alignment for DTS-HD length_code
Conflicts:
libavcodec/flicvideo.c
libavcodec/h264.c
libavcodec/mpeg4video_parser.c
libavcodec/vorbis.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
