Note that the symbols used to run the hardware decoder in asynchronous mode
have been marked deprecated and will be dropped at a future version bump.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
DVD subtitles packets can only encode a single rectangle:
if there are several, copy them into a big transparent one.
DVD subtitles rely on an external 16-colors palette:
use a reasonable default one, stored in the private context,
and encode it into the extradata, as specified by Matroska.
TODO: allow to change the palette with an option.
Each packet can use four colors out of the global palette.
The old logic was to map transparent colors to the color 0
and all other colors to 3, 2, 1, cyclically in descending
frequency order, completely disregarding the original color.
Select the "best" four colors from the global palette, according
to heuristics based on frequency, opacity and brightness, and
arrange them in standard DVD order: background, foreground,
outline, other.
TODO: select the alpha value more finely; see if CHG_COLCON can
allow more than 4 colors per packet.
Reference:
http://dvd.sourceforge.net/dvdinfo/spu.html
With these changes, dvdsubenc can be used to transcode DVB subtitles
and get a very decent result.
Note that the symbols used to run the hardware decoder in asynchronous mode
has been marked as deprecated and will be dropped at a future version dump.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes two issues preventing suncc from building this code.
The undocumented 'a' operand modifier, causing gcc to omit a $ in
front of immediate operands (as required in addresses), is not
supported by suncc. Luckily, the also undocumented 'c' modifer
has the same effect and is supported.
On some asm statements with a large number of operands, suncc for no
obvious reason fails to correctly substitute some of the operands.
Fortunately, some of the operands in these statements are plain
numbers which can be inserted directly into the code block instead
of passed as operands.
With these changes, the code builds correctly with both gcc and
suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This code contains a C array of addresses of labels defined in
inline asm. To do this, the names must be declared as external
in C. The declared type does not matter since only the address is
used, and for some reason, the author of the code used the 'void'
type despite taking the address of a void expression being invalid.
Changing the type to char, a reasonable choice since the alignment
of the code labels cannot be known or guaranteed, eliminates gcc
warnings and allows building with suncc.
Signed-off-by: Mans Rullgard <mans@mansr.com>
many branches and cases of scale_vector are irrelevant for the case here
and by inlining they can be reliably removed.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It appears someone thinks this special case can be reached
Well, it cannot, thus not only do we not need to optimize it
we dont need it at all
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
g723.1: do not pass large structs by value
g723.1: do not bounce intermediate values via memory
g723.1: declare a variable in the block it is used
g723.1: avoid saving/restoring excitation
g723.1: avoid unnecessary memcpy() in residual_interp()
g723.1: make postfilter write directly to output buffer
g723.1: drop unnecessary variable buf_ptr in formant_postfilter()
g723.1: make scale_vector() output to a separate buffer
g723.1: make autocorr_max() work on an arbitrary buffer
g723.1: do not needlessly use int64_t
g723.1: use saturating addition functions
g723.1: optimise scale_vector()
g723.1: remove useless uses of MUL64()
g723.1: remove unnecessary argument 'shift' from dot_product()
g723.1: deobfuscate "(x << 4) - x" to "15 * x"
celp: optimise ff_celp_lp_synthesis_filter()
libavutil: add saturating addition functions
cllc: Implement ARGB support
cllc: Add support for QRGB
cllc: Rename some funcs to represent what they actually do
...
Conflicts:
LICENSE
libavcodec/g723_1.c
libavcodec/x86/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Although a reasonable compiler will probably optimise out the
actual store and load, this operation still implies a truncation
to 16 bits which the compiler will probably not realise is not
necessary here.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Writing the scaled excitation to a scratch buffer (borrowing the
'audio' array) instead of modifying it in place avoids the need
to save and restore the unscaled values.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Use saturating addition functions instead of 64-bit intermediates
and separate clipping. This is much faster when dedicated
instructions are available.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Firstly, nothing in this function can overflow 32 bits so the use
of a 64-bit type is completely unnecessary. Secondly, the scale
is either a power of two or 0x7fff. Doing separate loops for these
cases avoids using multiplications. Finally, since only the number
of bits, not the actual value, of the maximum value is needed, the
bitwise or of all the values serves the purpose while being faster.
It is worth noting that even if overflow could happen, it was not
handled correctly anyway.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The operands in both cases are 16-bit so cannot overflow a 32-bit
destination. In gain_scale() the inputs are reduced to 14-bit,
so even the shift cannot overflow.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Adding instead of subtracting the products in the loop allows the
compiler to generate more efficient multiply-accumulate instructions
when 16-bit multiply-subtract is not available. ARM has only
multiply-accumulate for 16-bit operands. In general, if only one
variant exists, it is usually accumulate rather than subtract.
In the same spirit, using the dedicated saturation function enables
use of any special optimised versions of this.
Signed-off-by: Mans Rullgard <mans@mansr.com>
C++ does not allow to mix different enums, so e.g. code comparing
ACodecID with CodecID would fail to compile with gcc.
This very evil hack should fix this problem.
* qatar/master:
g723.1: fix addition overflow
g723.1: simplify and fix multiplication overflow
g723.1: deobfuscate an expression
g723.1: remove unused #includes
ARM: add missing "cc" clobber in av_clipl_int32_arm()
rtmp: Factorize the code by adding handle_invoke_error
rtmp: Factorize the code by adding handle_invoke_status
rtmp: Factorize the code by adding handle_invoke_result
libavutil: remove unused av_abort() macro
ffmenc: replace if/abort with assert()
libavutil: drop offsetof() fallback definition
libavutil: drop fallback definitions of INTxx_MIN/MAX
configure: Check for a sctp struct instead of just the header
configure: suncc: Add -xc99 to dependency flags, required on Solaris
doxygen: Fix function parameter names to match the code
doc: Drop obsolete shared libs cflags hint to workaround Cygwin gcc bugs
swf: Move shared table out of the header file
swf: Move swf_audio_codec_tags table to the only place it is used
fate: add G.723.1 decoder tests
Conflicts:
configure
doc/platform.texi
libavformat/Makefile
libavutil/arm/intmath.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In 16-bit arithmetic, x * 0xffffc is simply x * -4 with extra overflows,
(and the constant was probably meant to be 0xfffc). Combined with the
shift, this simplifies to -x >> 1. Finally, clearing the low two bits
with a 32-bit mask and switching to a 32-bit type allows more efficient
code on 32-bit machines.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
motion_est: drop inline from sad_hpel_motion_search()
motion_est: remove unused macros
motion_est: remove useless no_motion_search() function
lagarith: frame multithreading
doxygen: qdm2: Drop documentation for non-existing function parameters
build: add HOSTOBJS to SUBDIR_VARS list
Conflicts:
Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegvideo: reduce excessive inlining of mpeg_motion()
mpegvideo: convert mpegvideo_common.h to a .c file
build: factor out mpegvideo.o dependencies to CONFIG_MPEGVIDEO
Move MASK_ABS macro to libavcodec/mathops.h
x86: move MANGLE() and related macros to libavutil/x86/asm.h
x86: rename libavutil/x86_cpu.h to libavutil/x86/asm.h
aacdec: Don't fall back to the old output configuration when no old configuration is present.
rtmp: Add message tracking
rtsp: Support mpegts in raw udp packets
rtsp: Support receiving plain data over UDP without any RTP encapsulation
rtpdec: Remove an unused include
rtpenc: Remove an av_abort() that depends on user-supplied data
vsrc_movie: discourage its use with avconv.
avconv: allow no input files.
avconv: prevent invalid reads in transcode_init()
avconv: rename OutputStream.is_past_recording_time to finished.
Conflicts:
configure
doc/filters.texi
ffmpeg.c
ffmpeg.h
libavcodec/Makefile
libavcodec/aacdec.c
libavcodec/mpegvideo.c
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
At both places this function is called, mb_[xy] == s->mb_[xy]
making the call together with following code equivalent to
simply assigning zeros.
Signed-off-by: Mans Rullgard <mans@mansr.com>
The old code generates a termination packet with the same regions as the
start packet and page_state set to "only what changed"; the result is
that the termination packet is decoded as identical to the start packet.
The new code does as found in some DVB broadcasts: produce a packet with
no regions. This is done by expecting num_rects to be 0 rather than
using a flip-flop. ffmpeg.c is updated accordingly.
The main benefit of inlining this function is from constant
propagation for the 'field_based' argument. Instead of inlining
all calls, create two versions of the function for field_based
values of 0 and 1.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This file defines a single, huge function, MPV_motion(), which
although being declared inline is not actually inlined by the
compiler (for good reason). There is thus no sense in defining
this function in a header file, resulting in multiple copies of
it in the final library.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This adds a hidden config variable for the mpegvideo.o dependency
and selects from the codecs which require it.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This macro is only used in two places, both in libavcodec, so this
is a more sensible place for it.
Two small tweaks to the macro are made:
- removing the trailing semicolon
- dropping unnecessary 'volatile' from the x86 asm
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master: (23 commits)
build: cosmetics: Reorder some lists in a more logical fashion
x86: pngdsp: Fix assembly for OS/2
fate: add test for RTjpeg in nuv with frameheader
rtmp: send check_bw as notification
g723_1: clip argument for 15-bit version of normalize_bits()
g723_1: use all LPC vectors in formant postfilter
id3v2: Support v2.2 PIC
avplay: fix build with lavfi disabled.
avconv: split configuring filter configuration to a separate file.
avconv: split option parsing into a separate file.
mpc8: do not leave padding after last frame in buffer for the next decode call
mpegaudioenc: list supported channel layouts.
mpegaudiodec: don't print an error on > 1 frame in a packet.
api-example: update to new audio encoding API.
configure: add --enable/disable-random option
doc: cygwin: Update list of FATE package requirements
build: Remove all installed headers and header directories on uninstall
build: change checkheaders to use regular build rules
rtmp: Add a new option 'rtmp_subscribe'
rtmp: Add support for subscribing live streams
...
Conflicts:
Makefile
common.mak
configure
doc/examples/decoding_encoding.c
ffmpeg.c
libavcodec/g723_1.c
libavcodec/mpegaudiodec.c
libavcodec/x86/pngdsp.asm
libavformat/version.h
library.mak
tests/fate/video.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It expects maximum value to be 32767 but calculations in scale_vector()
which uses this function can give it ABS(-32768) which leads to wrong
result and thus clipping is needed.
* qatar/master:
x86: fix build with nasm 2.08
x86: use nop cpu directives only if supported
x86: fix rNmp macros with nasm
build: add trailing / to yasm/nasm -I flags
x86: use 32-bit source registers with movd instruction
x86: add colons after labels
Conflicts:
Makefile
libavutil/x86/x86inc.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
