This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently AVIOContext's private fields are all over AVIOContext.
This commit moves them into a new structure in avio_internal.h instead.
Said structure contains the public AVIOContext as its first element
in order to avoid having to allocate a separate AVIOContextInternal
which is costly for those use cases where one just wants to access
an already existing buffer via the AVIOContext-API.
For these cases ffio_init_context() can't fail and always returned zero,
which was typically not checked. Therefore it has been made to not
return anything.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The child_class_next API relied on different (de)muxers to use
different AVClasses; yet this API has been replaced by
child_class_iterate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When the Ogg muxer writes a page, it has to do three things: It needs to
write a page header, then it has to actually copy the page data and then
it has to calculate and write a CRC checksum of both header as well as
data at a certain position in the page header.
To do this, the muxer used a dynamic buffer for both writing as well as
calculating the checksum via an AVIOContext's feature to automatically
calculate checksums on the data it writes. This entails an allocation of
an AVIOContext, of the opaque specific to dynamic buffers and of the
buffer itself (which may be reallocated multiple times) as well as
memcopying the data (first into the AVIOContext's small write buffer,
then into the dynamic buffer's big buffer).
This commit changes this: The page header is no longer written into a
dynamic buffer any more; instead the (small) page header is written into
a small buffer on the stack. The CRC is then calculated directly via
av_crc() on both the page header as well as the page data. Then both the
page header and the page data are written.
Finally, ogg_write_page() can now no longer fail, so it has been
modified to return nothing; this also fixed a bug in the only caller of
this function: It didn't check the return value.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now ff_vorbiscomment_write() used the bytestream API to write
VorbisComments. Therefore the caller had to provide a sufficiently large
buffer to write the output.
Yet two of the three callers (namely the FLAC and the Matroska muxer)
actually want the output to be written via an AVIOContext; therefore
they allocated buffers of the right size just for this purpose (i.e.
they get freed immediately afterwards). Only the Ogg muxer actually
wants a buffer. But given that it is easy to wrap a buffer into an
AVIOContext this commit changes ff_vorbiscomment_write() to use an
AVIOContext for its output.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ff_vorbiscomment_write() used an AVDictionary ** parameter for a
dictionary whose contents ought to be written; yet this can be replaced
by AVDictionary * since commit 042ca05f0fdc5f4d56a3e9b94bc9cd67bca9a4bc;
and this in turn can be replaced by const AVDictionary * to indicate
that the dictionary isn't modified; the latter also applies to
ff_vorbiscomment_length().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
For FLAC, Speex, Opus and VP8 the Ogg muxer allocates two buffers
for building the headers: The first for extradata in an Ogg-specific
format and the second contains a Vorbiscomment. These buffers are
reachable via pointers in the corresponding AVStream's priv_data.
If an error happens during building the headers, the AVStream's
priv_data would be freed. This is pointless in general as it would be
freed generically anyway, but here it is actively harmful: If the second
of the aforementioned allocations fails, the first buffer would leak
upon freeing priv_data.
This commit stops freeing priv_data manually, which allows the muxer to
properly clean up in the deinit function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Converting explicit avio_flush() calls helps us to buffer more data and avoid
flushing the IO context too often which causes reduced IO throughput for
non-streamed file output.
The user can control FLUSH_POINT flushing behaviour using the -flush_packets
option, the default typically means to flush unless a non-streamed file output
is used, so this change should have no adverse effect on streaming even if it
is assumed that after an avio_flush() the output buffer is clean so small
seekbacks within the output buffer will work even when the IO context is not
seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
If the trailer is never writen, there could be buffered pages that would leak.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes a NULL pointer derefence when ogg_init() returns a failure and
a stream's private data was not yet allocated.
This is a regression since 3c5a53cdfa
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows simpler selection of flac in ogg from the command line,
while following the RFC 5334 recommendation[1] for the oga extension.
[1] https://tools.ietf.org/html/rfc5334#section-10.3
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
* commit 'f726fc21ef76a8ba3445448066f7b2a687fbca16':
ogg: Provide an option to offset the serial number
Conflicts:
libavformat/oggenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f9f34cb9983ec6f4ef119c34b726d3b39c143110':
ogg: Use separate classes for the aliases
Conflicts:
libavformat/oggenc.c
See: 2ccc6ff03a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '051aadeed104ecbe8ee4850ec2d7e5394f5e1ccd':
ogg: Provide aliases for Speex, Opus and audio-only ogg
Conflicts:
Changelog
libavformat/oggenc.c
libavformat/version.h
See: 2ccc6ff03a
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '194be1f43ea391eb986732707435176e579265aa':
lavf: switch to AVStream.time_base as the hint for the muxer timebase
Conflicts:
doc/APIchanges
libavformat/filmstripenc.c
libavformat/movenc.c
libavformat/mxfenc.c
libavformat/oggenc.c
libavformat/swf.h
libavformat/version.h
tests/ref/lavf/mkv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previously, AVStream.codec.time_base was used for that purpose, which
was quite confusing for the callers. This change also opens the path for
removing AVStream.codec.
The change in the lavf-mkv test is due to the native timebase (1/1000)
being used instead of the default one (1/90000), so the packets are now
sent to the crc muxer in the same order in which they are demuxed
(previously some of them got reordered because of inexact timestamp
conversion).
On big endian machines, the default value set via the faulty
AVOption ended up as 2^32 times too big.
This fixes the fate-lavf-ogg test which currently is broken on
big endian machines, broken since 3831362. Since that commit,
a final zero-sized packet is written to the ogg muxer in that test,
which caused different flushing behaviour on little and big endian
depending on whether the pref_duration option was handled as it
should or not.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '95b7fa1729b93bbb3f4fb85a5c0cb53cf970c3c7':
oggenc: Support flushing the muxer
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows the caller to write all buffered data to disk, allowing
the caller to know at what byte position in the file a certain
packet starts (any packet written after the flush will be located
after that byte position).
Signed-off-by: Martin Storsjö <martin@martin.st>
This corrects the bug that caused the checksums to change in
9767d7c092.
It caused the EOS flag to be set incorrectly; the ogg spec does not
allow it to be set in the middle of a logical bitstream.
Signed-off-by: Andrew Kelley <superjoe30@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'efcde917af407a6031ecff68edd51fce7b83d104':
vorbiscomment: simplify API by using av_dict_count()
Conflicts:
libavformat/flacenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
