The C version is set in ff_dct_encode_init(), yet the MIPS version
is set in dct_init() (in ff_mpv_common_init() and therefore also
for decoders). This commit fixes this inconsistency.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The code was written in 2012, but seems to have been broken
for just as long. Compilation is broken on every MIPS/MIPS64
system with an FPU (which the code depends on).
The function is called only internally in DSP, so we do not
need to expose it.
apply_ltp on MIPS uses this function, but due to the function
being just a glue function with no real optimizations,
duplicate it there.
Up until now, there was one AACDecContext for the fixed
and one for the floating point decoder. These differed
mostly in certain arrays which were int for the fixed-point
and float for the floating point decoder; there were also
differences in corresponding function pointers.
Yet in order to deduplicate the enormous amount of currently
duplicated code between the float and the fixed-point decoder,
one needs common contexts. Given that int and float have the
same size on all common systems, this commit replaces these
arrays by unions of int arrays and of float arrays. The names
of these arrays have been chosen to be compatible with
AAC_RENAME().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Each ChannelElement contains exactly one SpectralBandReplication
structure; the latter structure contains lots of buffers
whose size depend upon USE_FIXED (i.e. AAC_FLOAT arrays).
This complicates deduplicating the parts of the AAC decoder
that are duplicated between the fixed-point and the floating
point decoder.
In order to fix this, the SpectralBandReplication structure
will be moved from the part of ChannelElement visible to
the common code. Therefore the ff_aac_sbr_* functions
are ported to accept a ChannelElement*; they will then have
to translate that to the corresponding SpectralBandReplication*
themselves (which is possible, because there are floating-point
and fixed-point versions of these functions).
While just at it, also ensure that these functions are properly
namespaced.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_aac_coder_init_mips() modifies a static const structure of
function pointers. This will crash if the binary uses relro
and is a data race in any case.
Furthermore it points to a maintainability issue: The
AACCoefficientsEncoder structures have been constified
in commit fd9212f2edfe9b107c3c08ba2df5fd2cba5ab9e3,
a Libav commit merged in 318778de9ebec276cb9dfc65509231ca56590d13.
Libav did not have the MIPS-specific AAC code and so this was
fine for them; yet FFmpeg had them, but this was not recognized.
Commit 75a099fc734a4ee2b1347d0a3d8c53d883b95174 points to another
maintainability issue: Contrary to ordinary DSP code, this code
here is way more complex and needs to be constantly kept in sync
with the ordinary code which it mimicks and replaces. Said commit
is the only commit actually changing aaccoder.c in the last few
years and the same change has not been performed for the MIPS
clone; before that, it even happened several times that the mips
code was broken due to changes of the generic code (see commits
97437bd17a8c5d4135b2f3b1b299bd7bb72ce02c and
de262d018d7d7d9c967af1dfd1b861c4b9eb2a60 or
860dbe0275e57cbf4228f3f653f872ff66ca596b or
933309a6ca0f18bf1d40e917fff455221f57fb4b or
b65ffa316e377213c29736929beba584d0d80d7c). This might even lead
to scenarios where someone changing non-dsp aacenc code would
have to modify mips inline asm in order to keep them in sync.
This is obviously a significant burden (if the AAC encoder were
actively developed).
Finally, the code does not even compile here due to errors like
"Error: float register should be even, was 1".
Reviewed-by: Lynne <dev@lynne.ee>
Reviewed-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All versions of MSVC that support C11 (namely >= v19.27)
also support the restrict keyword, therefore av_restrict
is no longer necessary since 75697836b1db3e0f0a3b7061be6be28d00c675a0.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise aacenc.o gets pulled in by the aacencdsp checkasm
test and it in turn pulls the rest of lavc in.
Besides being bad size-wise this also has the downside that
it pulls in avpriv_(cga|vga16)_font from libavutil which are
marked as being imported from another library when building
libavcodec as a DLL and this breaks checkasm because it links
both lavc and lavu statically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is decoder-only; furthermore, there is already
an AACContext in use by libfdk-aacenc.
Also make aacdec.h provide the typedef for AACContext;
up until now, this has been done by sbr.h.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Besides simplifying address computations (it saves 432B of .text
in hevcdsp.o alone here) it also fixes undefined behaviour that
occurs if mx or my are 0 (happens when the filters are unused)
because they lead to an array index of -1 in the old code.
This happens in the checkasm-hevc_pel FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes compilation failures after 567c67c6c8cb9be083f56198bfa979e4bda84c99.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This patch replaces the transform used in AAC with lavu/tx and removes
the limitation on only being able to decode 960-sample files
with the float decoder.
This commit also removes a whole bunch of unnecessary and slow
lifting steps the decoder did to compensate for the poor accuracy
of the old integer transformation code.
Overall float decoder speedup on Zen 3 for 64kbps: 32%
Possible since 48ac225db2563fe534b1d9e999bf8e70d5a577f8.
Furthermore, the current code would not work on mips
in case ff_lsp2polyf() were used outside of lsp.c,
because it is not compiled on mips since commit
3827a86eacd04d9d7b356f769be553f7b8cca361 at all;
instead it is overridden with a static av_always_inline
function which only works for the callers in lsp.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The patch fixes the bugs that occurred when running
fate-checkasm-hevc_pel on MIPS paltform.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch fixes a bug where the fate-checkasm-motion fails when
h is not a multiple of 8.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The latest commit of Loongson MMI macro replaces were incorrect.
It makes a mass of green tints on HEVC videos when playing. I've
compared it with the older MMI implementation, and found out that
several lines have been replaced by wrong macros.
Signed-off-by: Qi Tiezheng <qitiezheng@360.cn>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The HEVC decoder has both HEVCContext and HEVCLocalContext
structures. The latter is supposed to be the structure
containing the per-slicethread state.
Yet that is not how it is handled in practice: Each HEVCLocalContext
has a unique HEVCContext allocated for it and each of these
coincides except in exactly one field: The corresponding
HEVCLocalContext. This makes it possible to pass the HEVCContext
everywhere where logically a HEVCLocalContext should be used.
This commit stops doing this for lavc/hevcpred as well as
the corresponding mips code; the latter is untested.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Move AC3HeaderInfo into ac3_parser_internal.h and the rest
into a new header ac3defs.h.
This also breaks an include cycle of ac3.h and ac3tab.h
(the latter now only needs ac3defs.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The existing x86 assembly for loop filters uses the stride as a
full register without clearing/sign extending the upper half
of the registers on x86_64.
This avoids crashes if the caller would have passed nonzero bits
in the previously undefined upper 32 bits of the parameters.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some of these were made possible by moving several common macros to
libavutil/macros.h.
While just at it, also improve the other headers a bit.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
mips has several headers that are only meant for inclusion in another
non-arch specific file; they do not even try to be standalone. So don't
test them in checkheaders.
Also fix vp9dsp_mips.h, an ordinary header missing some includes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
wsbh is only avilable for MIPS R2+.
Provide a fallback for older processors.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
