The start code is matched against 0x000001, zero_byte was treated
as last byte of last frame rather than the beginning of next frame.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Motivated by YUVJ removal. This change will allow full negotiation
between color ranges and matrices as needed. By default, all ranges and
matrices are marked as supported.
Because grayscale formats are currently handled very inconsistently (and
in particular, assumed as forced full-range by swscale), we exclude them
from negotiation altogether for the time being, to get this API merged.
After filter negotiation is available, we can relax the
grayscale-is-forced-jpeg restriction again, when it will be more
feasible to do so without breaking a million test cases.
Note that this commit updates one FATE test as a consequence of the
sanity fallback for non-YUV formats. In particular, the test case now
writes rgb24(pc, gbr/unspecified/unspecified) to the matroska file,
instead of rgb24(unspecified/unspecified/unspecified) as before.
For memcpy and memcmp, we need to multiply by the element size,
otherwise we're copying and comparing only a fraction of the buffer.
For decorrelate_sr, the buffer p1 is the one that is mutated;
copy and check p1 instead of p2.
For decorrelate_sm, both buffers are mutated, so copy and check
both of them.
For decorrelate_sm, the memcpy initialization of p1 and p1_2 was
reversed - p1 is filled with randomize, but then memcpy copies from
p1_2 to p1. As p1_2 is uninitialized at this point, clang concluded
that the copy was bogus and omitted it entirely, triggering failures
in this test on x86 (where there was an existing assembly implementation
to test).
Signed-off-by: Martin Storsjö <martin@martin.st>
The ffmpeg coding style doesn't usually use const on scalar
parameters (or on the pointer values - as opposed to the type
that is pointed to, where it has a semantic meaning), contrary
to the dav1d coding style (where this was imported from).
This avoids warnings about differences in the type signatures
between declaration and definition of this function, with older
versions of MSVC.
The issue was observed with one version of MSVC 2017,
19.16.27024.1, with warnings like these:
src/tests/checkasm/checkasm.c(969): warning C4028: formal parameter 3 different from declaration
The warning itself is bogus as the const here is harmless, and
newer versions of MSVC no longer warn about this.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be used to run tests multple times, with e.g. differing
QEMU settings, by adding something like this to the FATE configuration
file:
target_exec="qemu-aarch64-static"
fate_targets="fate-checkasm fate-cpu"
fate_environments="sve128 sve256 sve512"
sve128_env="QEMU_CPU=max,sve128=on"
sve256_env="QEMU_CPU=max,sve256=on"
sve512_env="QEMU_CPU=max,sve512=on"
It's also possible to customize the target_exec command further
by injecting a sufficiently quoted variable into it, which then can
be updated for each run, e.g. target_exec="\$(CUR_EXEC_CMD)".
For each of the environment names in fate_environments, the tests
that are run get the name suffixed on the fate tests in the
test log and fate report, e.g. "fate-checkasm-h264dsp_sve128".
Signed-off-by: Martin Storsjö <martin@martin.st>
This can be useful if doing testing of uncommon CPU extensions by
running tests with QEMU (by configuring with e.g.
"target_exec=qemu-aarch64"), by only running the checkasm tests,
to get a reasonable test coverage without excessive test runtime.
For such a config, setting fate_targets="fate-checkasm fate-cpu"
can be a good tradeoff.
Signed-off-by: Martin Storsjö <martin@martin.st>
During a resampling operation where
1) user has specified first_pts
2) SWR_FLAG_RESAMPLE is not set initially (directly or otherwise)
3) first_pts has been fulfilled (always using hard compensation)
then upon first encountering a delay where a soft compensation is
required, swr_set_compensation will lead to another init of swr which
will reset outpts to the specified firstpts thus leading to an output
frame having its pts = firstpts. When the next input frame is received,
swr will see a large delay and inject silence from firstpts to the
current frame's pts. This can lead to severe desync and in worst case,
loss of audio playback.
Parameter firstpts initialized to AV_NOPTS_VALUE in swr_alloc and then
checked in swr_init to avoid resetting outpts, thus avoiding reapplication
of firstpts.
Fixes#4131.
This test verifies the parser's handling of multiframe JXL files that
have an entropy-encoded permuted table of contents for each frame. The
testcase is actually six JXL codestreams concatenated together, and the
parser needs to be able to find the boundaries.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
- Fixes YA formats, because previous code always assumed alpha as the 4th
component.
- Fixes PAL format (as long as 0 is black, as in a systematic palette), because
previous code assumed it as limited Y.
- Fixes XYZ format because it does not need nonzero chroma components
- Fixes xv30be as the bitstream mode got merged to the non-bitstream mode.
Signed-off-by: Marton Balint <cus@passwd.hu>
Change the main loop and every component (demuxers, decoders, filters,
encoders, muxers) to use the previously added transcode scheduler. Every
instance of every such component was already running in a separate
thread, but now they can actually run in parallel.
Changes the results of ffmpeg-fix_sub_duration_heartbeat - tested by
JEEB to be more correct and deterministic.
Avoid making decisions based on current graph input state, which makes
the output dependent on the order in which the frames from different
inputs are interleaved.
Makes the output of fate-filter-overlay-dvdsub-2397 more correct - the
subtitle appears two frames later, which is closer to its PTS as stored
in the file.
The len parameter was changed from unsigned int to size_t in
567c67c6c8.
This fixes crashes in the reference C code, when running checkasm
on aarch64.
Signed-off-by: Martin Storsjö <martin@martin.st>
Terminating the whole checkasm process is not very helpful. This will
report if an illegal instruction occurs while executing a tested
function. This is a common occurrence whilst developping RISC-V
assembler, due to the compatibility between vector configuration and
instruction done at run-time.
For fate-h264_mp4toannexb_ticket5927 and
fate-h264_mp4toannexb_ticket5927_2, they work by accident
previously. The sample file has two 'avc1' entries, and video
samples use the second one. It means packets should be decoded with
new extradata in side data. Before this patch, only extradata was
kept in the output, new extradata has been dropped. The output can
be decoded because the two extradata are almost the same, except
level indication. This patch fixed the issue, and add another
fate test.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
If there is a single group of SPS/PPS before an IDR frame, but no
SPS/PPS after that, we will miss the chance to reset
idr_sps_seen/idr_pps_seen. No SPS/PPS are inserted afterwards.
This patch saves in-band SPS/PPS and insert them before IDR frames
when necessary.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
decorrelate_ls, _rs and _ms are decorrelate[1], [2] and [3] respectively.
The code ended up testing indep ([0]) as twice, ms never, and misnaming
the other two.
Current code tracks min/max pts for each stream separately; then when
the file ends it combines them with last frame's duration to compute the
total duration of each stream; finally it selects the longest of those
durations as the file duration.
This is incorrect - the total file duration is the largest timestamp
difference between any frames, regardless of the stream.
Also change the way the last frame information is reported from decoders
to the muxer - previously it would be just the last frame's duration,
now the end timestamp is sent, which is simpler.
Changes the result of the fate-ffmpeg-streamloop-transcode-av test,
where the timestamps are shifted slightly forward. Note that the
matroska demuxer does not return the first audio packet after seeking
(due to buggy interaction betwen the generic code and the demuxer), so
there is a gap in audio.
The tested functions treat s_m[i] == 0 as a special case. Other than
that, the functions are slightly complicated vector additions.
This actually makes the zero case happen pseudorandomly.
PGMYUV seems to be always limited range. This was a format originally
invented by FFmpeg at a time when YUVJ distinguished limited from full
range YUV, and this codec never appeared to output YUVJ in any
circumstance, so hard-coding limited range preserves the status quo.
The other formats are explicitly documented to be full range RGB/gray
formats. That said, don't tag them yet, due to outstanding bugs w.r.t
grayscale formats and color range handling.
This change in behavior updates a bunch of FATE tests in trivial ways
(added tagging being the only difference).
