While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
While no decoder currently exports spherical information, this type
represents a frame property that has to be passed through from container
to frames.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
The Intel binary iHD driver does not support the
VASurfaceAttribMemoryType, so surface allocation will fail when using
it.
(cherry picked from commit 2124711b95)
The driver being used is detected inside av_hwdevice_ctx_init() and
the quirks field then set from a table of known device. If this
behaviour is unwanted, the user can also set the quirks field
manually.
Also adds the Intel i965 driver quirk (it does not destroy parameter
buffers used in a call to vaRenderPicture()) and detects that driver
to set it.
(cherry picked from commit 4926fa9a4a)
Adds the new av_hwframe_map() function, which allows mapping between
hardware frames and normal memory, along with internal support for
implementing it.
Also adds av_hwframe_ctx_create_derived(), for creating a hardware
frames context associated with one device using frames mapped from
another by some hardware-specific means.
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
* commit '32c8359093d1ff4f45ed19518b449b3ac3769d27':
lavc: export the timestamps when decoding in AVFrame.pts
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This will be used to allow writing file sequences using the tee output onto
multiple places in parallel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The driver being used is detected inside av_hwdevice_ctx_init() and
the quirks field then set from a table of known device. If this
behaviour is unwanted, the user can also set the quirks field
manually.
Also adds the Intel i965 driver quirk (it does not destroy parameter
buffers used in a call to vaRenderPicture()) and detects that driver
to set it.
P010 is the 10-bit variant of NV12 (planar luma, packed chroma), using two
bytes per component to store 10-bit data plus 6-bit zeroes in the LSBs.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit 'e47b8bbf0b54599d44b9330eb4d68cdde4f6d298':
avcodec: Bump micro version after changing public JPEG 2000 defines
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit 'db7968bff4851c2be79b15b2cb2ae747424d2fca':
avio: Allow custom IO users to get labels for the output bytestream
Merged-by: Matthieu Bouron <matthieu.bouron@stupeflix.com>
* commit '0c4468dc185fa8b9e7d6add914595c5e928b24fd':
stereo3d: Add API to get name from value or value from name
Merged-by: Clément Bœsch <clement@stupeflix.com>
Currently it's exported as AVFrame.pkt_pts, which is also the only use
for that field. The reason it is done like this is that lavc used to
export various codec-specific "timing" information in AVFrame.pts, which
is not done anymore.
Since it is confusing to the callers to have a separate field which is
used only for decoder timestamps and nothing else, deprecate pkt_pts and
use just AVFrame.pts everywhere.
This allows callers with avio write callbacks to get the bytestream
positions that correspond to keyframes, suitable for live streaming.
In the simplest form, a caller could expect that a header is written
to the bytestream during the avformat_write_header, and the data
output to the avio context during e.g. av_write_frame corresponds
exactly to the current packet passed in.
When combined with av_interleaved_write_frame, and with muxers that
do buffering (most muxers that do some sort of fragmenting or
clustering), the mapping from input data to bytestream positions
is nontrivial.
This allows callers to get directly information about what part
of the bytestream is what, without having to resort to assumptions
about the muxer behaviour.
One keyframe/fragment/block can still be split into multiple (if
they are larger than the aviocontext buffer), which would call
the callback with e.g. AVIO_DATA_MARKER_SYNC_POINT, followed by
AVIO_DATA_MARKER_UNKNOWN for the second time it is called with
the following data.
Signed-off-by: Martin Storsjö <martin@martin.st>
The new function behaves the same as av_log_format_line, but also forwards
the return value from the underlying snprintf call. This will allow
callers to accurately determine the size requirements for the line buffer.
Signed-off-by: Andreas Weis <github@ghulbus-inc.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
From Libav commit 05f66706d1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* commit '3e8fd93b6ab219221e17fa2b6243cc72cf2d69dc':
lavf: add a missing bump and APIchanges for the codecpar switch
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'a8068346e48e123f8d3bdf4d64464d81e53e5fc7':
lavc: add a variant of av_get_audio_frame_duration working with AVCodecParameters
Fixes from jamrial incorporated.
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit '998e1b8f521b73e1ed3a13caaabcf79eb401cf0d':
lavc: add codec parameters API
Fixes added in:
- bit_rate has been made int64_t to match.
- profile and level are properly initialize.
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Until now, the decoding API was restricted to outputting 0 or 1 frames
per input packet. It also enforces a somewhat rigid dataflow in general.
This new API seeks to relax these restrictions by decoupling input and
output. Instead of doing a single call on each decode step, which may
consume the packet and may produce output, the new API requires the user
to send input first, and then ask for output.
For now, there are no codecs supporting this API. The API can work with
codecs using the old API, and most code added here is to make them
interoperate. The reverse is not possible, although for audio it might.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Check that the required plane pointers and only
those are set up.
Currently does not enforce anything for the palette
pointer of pseudopal formats as I am unsure about the
requirements.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
* commit '7b3214d0050613bd347a2e41c9f78ffb766da25e':
lavc: add a field for passing AVHWFramesContext to encoders
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
This API is intended to allow passing around codec parameters without
using full AVCodecContext (which also contains codec options and
encoder/decoder state).
