If a codelet initializes 2 subtransforms, and the second one fails,
the failure would free all subcontexts.
Instead, if there are subcontexts still left, don't free the array.
If all initializations fail, the init() function will return,
and reset_ctx() from the previous step will clean up all contained
subtransforms.
Fix CID: 1497864
The control flow should return ENOSYS if nb_cd_matches is 0 at before
and the ret equal AVERROR(ENOMEM) or goto end label, so remove the last
control flow if (ret >= 0) before end label.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
This broke builds with --disable-mmx, which also disabled assembly
entirely, but ARCH_X86 was still true, so the init file tried to find
assembly that didn't exist.
Instead of checking for architecture, check if external x86 assembly
is enabled.
RDFTs are full of conventions that vary between implementations.
What I've gone for here is what's most common between
both fftw, avcodec's rdft and what we use, the equivalent of
which is DFT_R2C for forward and IDFT_C2R for inverse. The
other 2 conventions (IDFT_R2C and DFT_C2R) were not used at
all in our code, and their names are also not appropriate.
If there's a use for either, we can easily add a flag which
would just flip the sign on one exptab.
For some unknown reason, possibly to allow reusing FFT's exp tables,
av_rdft's C2R output is 0.5x lower than what it should be to ensure
a proper back-and-forth conversion.
This code outputs its real samples at the correct level, which
matches FFTW's level, and allows the user to change the level
and insert arbitrary multiplies for free by setting the scale option.
This commit rewrites the internal transform code into a constructor
that stitches transforms (codelets).
This allows for transforms to reuse arbitrary parts of other
transforms, and allows transforms to be stacked onto one
another (such as a full iMDCT using a half-iMDCT which in turn
uses an FFT). It also permits for each step to be individually
replaced by assembly or a custom implementation (such as an ASIC).
Fixes: left shift of negative value -1
Fixes: 33736/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SIREN_fuzzer-6657785795313664
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit adds a pure x86 assembly SIMD version of the FFT in libavutil/tx.
The design of this pure assembly FFT is pretty unconventional.
On the lowest level, instead of splitting the complex numbers into
real and imaginary parts, we keep complex numbers together but split
them in terms of parity. This saves a number of shuffles in each transform,
but more importantly, it splits each transform into two independent
paths, which we process using separate registers in parallel.
This allows us to keep all units saturated and lets us use all available
registers to avoid dependencies.
Moreover, it allows us to double the granularity of our per-load permutation,
skipping many expensive lookups and allowing us to use just 4 loads per register,
rather than 8, or in case FMA3 (and by extension, AVX2), use the vgatherdpd
instruction, which is at least as fast as 4 separate loads on old hardware,
and quite a bit faster on modern CPUs).
Higher up, we go for a bottom-up construction of large transforms, foregoing
the traditional per-transform call-return recursion chains. Instead, we always
start at the bottom-most basis transform (in this case, a 32-point transform),
and continue constructing larger and larger transforms until we return to the
top-most transform.
This way, we only touch the stack 3 times per a complete target transform:
once for the 1/2 length transform and two times for the 1/4 length transform.
The combination algorithm we use is a standard Split-Radix algorithm,
as used in our C code. Although a version with less operations exists
(Steven G. Johnson and Matteo Frigo's "A modified split-radix FFT with fewer
arithmetic operations", IEEE Trans. Signal Process. 55 (1), 111–119 (2007),
which is the one FFTW uses), it only has 2% less operations and requires at least 4x
the binary code (due to it needing 4 different paths to do a single transform).
That version also has other issues which prevent it from being implemented
with SIMD code as efficiently, which makes it lose the marginal gains it offered,
and cannot be performed bottom-up, requiring many recursive call-return chains,
whose overhead adds up.
We go through a lot of effort to minimize load/stores by keeping as much in
registers in between construcring transforms. This saves us around 32 cycles,
on paper, but in reality a lot more due to load/store aliasing (a load from a
memory location cannot be issued while there's a store pending, and there are
only so many (2 for Zen 3) load/store units in a CPU).
Also, we interleave coefficients during the last stage to save on a store+load
per register.
Each of the smallest, basis transforms (4, 8 and 16-point in our case)
has been extremely optimized. Our 8-point transform is barely 20 instructions
in total, beating our old implementation 8-point transform by 1 instruction.
Our 2x8-point transform is 23 instructions, beating our old implementation by
6 instruction and needing 50% less cycles. Our 16-point transform's combination
code takes slightly more instructions than our old implementation, but makes up
for it by requiring a lot less arithmetic operations.
Overall, the transform was optimized for the timings of Zen 3, which at the
time of writing has the most IPC from all documented CPUs. Shuffles were
preferred over arithmetic operations due to their 1/0.5 latency/throughput.
On average, this code is 30% faster than our old libavcodec implementation.
It's able to trade blows with the previously-untouchable FFTW on small transforms,
and due to its tiny size and better prediction, outdoes FFTW on larger transforms
by 11% on the largest currently supported size.
This sadly required making changes to the code itself,
due to the same context needing to be reused for both versions.
The lookup table had to be duplicated for both versions.
out[lut[i]] = in[i] lookups were 4.04 times(!) slower than
out[i] = in[lut[i]] lookups for an out-of-place FFT of length 4096.
The permutes remain unchanged for anything but out-of-place monolithic
FFT, as those benefit quite a lot from the current order (it means
there's only 1 lookup necessary to add to an offset, rather than
a full gather).
The code was based around non-power-of-two FFTs, so this wasn't
benchmarked early on.
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
Required minimal changes to the code so made sense to implement.
FFT and MDCT tested, the output of both was properly rounded.
Fun fact: the non-power-of-two fixed-point FFT and MDCT are the fastest ever
non-power-of-two fixed-point FFT and MDCT written.
This can replace the power of two integer MDCTs in aac and ac3 if the
MIPS optimizations are ported across.
Unfortunately the ac3 encoder uses a 16-bit fixed point forward transform,
unlike the encoder which uses a 32bit inverse transform, so some modifications
might be required there.
The 3-point FFT is somewhat less accurate than it otherwise could be,
having minor rounding errors with bigger transforms. However, this
could be improved later, and the way its currently written is the way one
would write assembly for it.
Similar rounding errors can also be found throughout the power of two FFTs
as well, though those are more difficult to correct.
Despite this, the integer transforms are more than accurate enough.
Simply moves and templates the actual transforms to support an
additional data type.
Unlike the float version, which is equal or better than libfftw3f,
double precision output is bit identical with libfftw3.
This commit adds a new API to libavutil to allow for arbitrary transformations
on various types of data.
This is a partly new implementation, with the power of two transforms taken
from libavcodec/fft_template, the 5 and 15-point FFT taken from mdct15, while
the 3-point FFT was written from scratch.
The (i)mdct folding code is taken from mdct15 as well, as the mdct_template
code was somewhat old, messy and not easy to separate.
A notable feature of this implementation is that it allows for 3xM and 5xM
based transforms, where M is a power of two, e.g. 384, 640, 768, 1280, etc.
AC-4 uses 3xM transforms while Siren uses 5xM transforms, so the code will
allow for decoding of such streams.
A non-exaustive list of supported sizes:
4, 8, 12, 16, 20, 24, 32, 40, 48, 60, 64, 80, 96, 120, 128, 160, 192, 240,
256, 320, 384, 480, 512, 640, 768, 960, 1024, 1280, 1536, 1920, 2048, 2560...
The API was designed such that it allows for not only 1D transforms but also
2D transforms of certain block sizes. This was partly on accident as the stride
argument is required for Opus MDCTs, but can be used in the context of a 2D
transform as well.
Also, various data types would be implemented eventually as well, such as
"double" and "int32_t".
Some performance comparisons with libfftw3f (SIMD disabled for both):
120:
22353 decicycles in fftwf_execute, 1024 runs, 0 skips
21836 decicycles in compound_fft_15x8, 1024 runs, 0 skips
128:
22003 decicycles in fftwf_execute, 1024 runs, 0 skips
23132 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
384:
75939 decicycles in fftwf_execute, 1024 runs, 0 skips
73973 decicycles in compound_fft_3x128, 1024 runs, 0 skips
640:
104354 decicycles in fftwf_execute, 1024 runs, 0 skips
149518 decicycles in compound_fft_5x128, 1024 runs, 0 skips
768:
109323 decicycles in fftwf_execute, 1024 runs, 0 skips
164096 decicycles in compound_fft_3x256, 1024 runs, 0 skips
960:
186210 decicycles in fftwf_execute, 1024 runs, 0 skips
215256 decicycles in compound_fft_15x64, 1024 runs, 0 skips
1024:
163464 decicycles in fftwf_execute, 1024 runs, 0 skips
199686 decicycles in monolithic_fft_ptwo, 1024 runs, 0 skips
With SIMD we should be faster than fftw for 15xM transforms as our fft15 SIMD
is around 2x faster than theirs, even if our ptwo SIMD is slightly slower.
The goal is to remove the libavcodec/mdct15 code and deprecate the
libavcodec/avfft interface once aarch64 and x86 SIMD code has been ported.
New code throughout the project should use this API.
The implementation passes fate when used in Opus, AAC and Vorbis, and the output
is identical with ATRAC9 as well.
