This would be simpler if codecpar supported AVOptions
modern ffserver should be unaffected by this, older ffserver which required the
muxer to directly access the encoder could have issues with this, but this
direct access is just wrong and unsafe
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This accesses the private encoder context, it should not be used by
the current ffserver it may affect old ffserver versions but i believe
there is consens that accessing the private encoder context from the muxer
is completely wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Note, this temporarly drops the ability to set ffmpeg encoder debug and flags2 via ffserver.conf
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts parts of c16582579b. The hard
coded 30 seconds are a lot, and finishing the seek can takes several
seconds when the source is on a network share. Remove this code
entirely, because it does more bad than good.
(Commit message provided by committer, based on the original messages
by the patch author.)
Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Using the decode interrupt feature of ffmpeg may cause crashes by
accessing previously freed pointers in matroska_read_close.
To prevent this reset nb_elem to zero after freeing the elements,
because ffmpeg normally tests for nb_elem.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The code calls av_new_packet a few lines above and the allocated memory
has to be freed in case of an error.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
mythtv have problem with non-seekable dont write duration and filesize
and there have problem with some other server and player with 0 value
duation and filesize.
So add a flv flags to fix the ticket and make a choose for users.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Otherwise the codec context and codecpar might disagree on the codec id,
triggering asserts in av_parser_parse2.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes division by zero crashes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Metadata streams have priv_data set to NULL.
Reviewed-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Based on the draft spec at https://git.xiph.org/?p=flac.git;a=blob;f=doc/isoflac.txt
'-strict experimental' is required to create files in this format.
Signed-off-by: Matthew Gregan <kinetik@flim.org>
Signed-off-by: James Almer <jamrial@gmail.com>
FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
A negative extradata size for example gets passed to memcpy in
avcodec_parameters_from_context causing a segmentation fault.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This makes av_stream_add_side_data() consistent with av_packet_add_side_data().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
when parsing keyframe index metadata, list the message by trace log
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit e0c6b32046.
Said commit changed the behavior of the demuxer and decoder in a non
backwards compatible way.
Demuxers should make extradata available at init if possible, and send
new extradata as side data within a packet if needed.
A better fix for the remuxing crash will follow.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes division by 0
This is similar to how avg_frame_rate is checked elsewhere
Fixes: 6d24add0455f41b1b45b7ba615cd46f3/asan_generic_dc34c3_5480_0a2ef411cae999b9871ed71a2e481b71.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4f7723cb3b913c577842a5bb088c804ddacac8df':
movenc: Add an option for skipping writing the mfra/tfra/mfro trailer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '029cf99c5166b36f33381cd8ebfa5f1f1f463d1f':
mov: Save number of stsd elements after stream extradata allocation
Mostly noop, see 8b43ee4054
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '785c25443b56adb6dbbb78d68cccbd9bd4a42e05':
movenc: Apply offsets on timestamps when peeking into interleaving queues
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This prevents a division by zero in read_packet.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes valgrind warning about "Conditional jump or move depends on uninitialised value(s)"
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes https://trac.ffmpeg.org/ticket/5940#ticket
Reviewed-by: Michael Niedermayer <<michael@niedermayer.cc>>
Signed-off-by: Robert Nagy <ronag89@gmail.com>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
It can read less than the requested amount, in which case buf contains
uninitialized data, causing problems like segmentation faults later on.
Also make sure that image->size is positive, so that it can't match a
negative error code.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add keyframe index metadata
Used to facilitate seeking; particularly for HTTP pseudo streaming.
1. read live streaming or file by sequence
2. if use add_keyframe_index option, add a mark flag at the position,
use to insert new context at the last step.
3. add the keyframes *offset* and *timestamp* into a list
4. if use add_keyframe_index option, shift the metadata data from
mark flag offset
5. insert the keyframes *offset* and *timestamp* from the list by
sequence
6. free the list
7. end.
Add FATE test case;
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The code assumes that s->streams[0] is valid.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the value is negative then it means padding at the start of the packet
instead of at the end.
Based on a patch by Hendrik Leppkes.
Reviewed-by: James Zern <jzern-at-google.com@ffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Use the hls_close function to reduce code duplication.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is needed for the following commit.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Commit 04964ac311 ("avformat/hls: Fix missing streams in some
cases with MPEG TS") caused a regression where subdemuxer streams that
use probing (e.g. dts/eac3/mp2 in mpegts) no longer get probed properly.
This is because the codec parameters from the subdemuxer stream, once
probed, are not passed on to the main stream.
Fix that by updating the codec parameters if the codec id changes.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
AVCodecParameters.sample_rate is a signed integer, so
XMVAudioPacket.sample_rate should be, too.
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Also check for errors from avpriv_mpeg4audio_get_config in
ff_mp4_read_dec_config_descr.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
fate-aac-al07_96 fails if sample_rate == 0 is rejected in
ff_mov_read_stsd_entries.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes: error: dereferencing pointer to incomplete type
Tested-by: Dave Yeo <daveryeo@telus.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is required since some programs are not able to correctly recognize
the metadata. See H.222, 2.6.58 Metadata pointer descriptor.
putstr8() is modified in order to allow to skip writing the string
length.
This should be more useful for users since numerical values for channel
layout can be confusing and unintuitive.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Metadata streams have priv_data set to NULL.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When ffplay is used to play from the RTSP URL that serves 24 bit audio
content, ffplay fails to recognize the audio codec format. The attached
patch adds support for playing 24 bit audio content over RTSP by
defining a dynamic payload handler for "L24".
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The bitstream filters do not work with merged in side data
This leaves the input packet split if it is being split.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit fba2a8a254.
The changes were right for av_write_frame() but not for av_interleaved_write_frame().
The following commit will fix this in a simpler way.
Signed-off-by: James Almer <jamrial@gmail.com>
Similarly, merge it back before returning.
Fixes ticket #5927.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
According to spec ISO_IEC_15444_12 "For any media stream for which no segment index is present, referred to as non‐indexed stream, the media stream associated with the first Segment Index box in the segment serves as a reference stream in a sense that it also describes the subsegments for any non‐indexed media stream."
Signed-off-by: Sasi Inguva <isasi@google.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The parser depends on the codec and thus must not be used with a different one.
If it is, the 'avctx->codec_id == s->parser->codec_ids[0] ...' assert in
av_parser_parse2 gets triggered.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This avoids potential rounding errors and guarantees the source aspect
ratio is preserved.
Keep writing pixel values when Stereo 3D Mode is enabled and for WebM,
as the format doesn't support anything else.
This fixes ticket #5743, implementing the suggestion from ticket #5903.
Signed-off-by: James Almer <jamrial@gmail.com>
This avoids continuity check failures in concatenated streams
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes remuxing apng streams coming from the apng demuxer.
This is a regression since 940b8908b9.
Found-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If there are no index entries, e_old = st->index_entries is only one
byte large, since it was created by av_realloc called with size 0.
Thus accessing e_old[0].timestamp causes a heap buffer overflow.
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
Fixes ticket #5915.
This fixes creating apng files, which is broken since commit
5ef1959080.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a15
Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>
Some people seem to oppose this the patch seems to have been missed for a month on the ML
lets restart the discussion and solve this after the release
This reverts commit e936c8d176.
Allowing larger timestamps makes it impossible to calculate basic things like the
difference of 2 timestamps or their sum without checking each individual computation for
overflow.
This should avoid a significant number of overflow checks
Fixes Ticket5136
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current code doesn't initialize AVPacket::pos. Made it point to FLVTAG so flv_read_packet can decode from pos
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the macro is expanded with a semicolon following it and the
macro itself contains a semicolon, we ended up in double semicolons,
which is treated as a statement that disallows further declarations.
This avoids errors about mixed declarations and statements on gcc,
after ee05079766.
Signed-off-by: Martin Storsjö <martin@martin.st>
3 parts:
- Supports multiple chapter streams
- Exports regular text chapter streams as opaque data. This prevents consumers
from showing chapters as if they were regular subtitle streams.
- Exports video chapter streams as thumbnails, and provides the first one as
an attached_pic.
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
Instead use our own struct, which we already use when using
gcrypt and gnutls.
In OpenSSL 1.1, the DH struct has been made opaque.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is negative, so can't be used for left shifting.
This fixes ubsan runtime error: shift exponent -1 is negative
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add new mime types AAL2-G726 for g726 as suggested in rfc 3551.
This patch will break interaction with applications that incorrectly
use big-endian G.726 with mime type G726 but we know of at least one
device (DVTel camera) that correctly implements the rfc, so do the same.
Fixes ticket #5890.
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
For 'nclx', the latest edition of the standard switched from JPEG XR
to 23001-8, which matches the current order of our entries. Bounds
are preserved as a sanity check.
For 'nclc', qtff edition 2016-09-13 introduced a few new entries.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also check for possible overflows.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
It can be unset in avcodec_parameters_from_context and a value of 0
causes SIGFPE crashes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix problem to fail by a RTMP Control Message except "Set Chunk Size (1)" after an RTMP handshake. When 'nginx-rtmp-module' relays an RTMP, it sends not only control message 'Set Chunk Size (1)' but also 'Window Acknowledgement Size (5)'.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Read video_line_map from MXF generic picture essence descriptor and use
it to derive the coded field order. Use field_dominance to derive the
display field order from coded field order. If field_dominance is not
available the default value "1" is used as defined in SMPTE S377-1.
Fixes field_order detection for a bunch of DV/DVCPRO files. The heuristic
for deriving coded field order from video_line_map is inspired by
MediaInfo.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Negative values don't make sense and too large values can cause
overflows. For AV_CODEC_ID_ADPCM_THP this leads to a too small extradata
buffer being allocated, causing out-of-bounds writes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Its impossible to update the filesize & duration values if seekback is not
possible as with live streams
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If probe_codec is called with pkt == NULL, it sets probe_packets to 0
and request_probe to -1.
However, request_probe can change when calling s->iformat->read_packet
and thus a probe_packets value of 0 doesn't guarantee a request_probe
value of -1.
In that case calling probe_codec again is necessary to prevent
triggering the assert.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This way it's more clear what the default values refer to, as
Undetermined/Unspecified is 0 for some, 2 for others.
Signed-off-by: James Almer <jamrial@gmail.com>
The problem was introduced in commit 1273bc6.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
mov_finalize_stsd_codec parses stream information from the ALAC extradata,
so run it after the extradata processing is completed in mov_read_stsd.
Fixes playback of 96kHz ALAC streams muxed by qaac or the reference alac encoder.
Fixes trac ticket #5826
This also fixes a minor bug introduced in the codecpar conversion, where
the termination condition for extracting the extradata does not match
the actual extradata setting code. As a result, the packet durations
made up by lavf go back to their values before the codecpar conversion.
That is of little consequence since that code should eventually be
dropped completely.
This way they can be reused by other code without including the whole
decoder-specific hevcdec.h
Also, add the HEVC_ prefix to them, since similarly named values exist
for H.264 as well and are sometimes used in the same code.
The code works just fine regardless of unit, so only make sure DisplayUnit
is not "unknown".
Found-by: Nicolas George <george@nsup.org>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
The spec says
9: Interlaced with bottom field displayed first and top field stored first
14: Interlaced with top field displayed first and bottom field stored first
And avcodec.h states
AV_FIELD_TB, //< Top coded first, bottom displayed first
AV_FIELD_BT, //< Bottom coded first, top displayed first
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
We don't currently support values 1 (centimeters), 2 (inches) or 3 (DAR),
only the default value 0 (pixels) which doesn't need to be written.
The fate refs are updated as unknown SAR is now signaled in the output
files with the addition of the new element.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
A missing DisplayUnit element or one with the default value of 0 means
DisplayWidth and DisplayHeight should be interpreted as pixels.
The current code setting st->sample_aspect_ratio is wrong when DisplayUnit
is anything else.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
According to the public RTMP specification, these 4 bytes should
be zero.
librtmp in server mode assumes that the RTMPE (FP9) handshake is
used if these bytes are nonzero.
Signed-off-by: Martin Storsjö <martin@martin.st>
When acting as server, the server can include a "clientid" property
in some status messages. But this should be a unique number
identifying the client session, not identifying the server itself.
In practice, omitting it works just as well as including this
incorrect field.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure that e.g. Adobe FME actually reacts to it. As long
as the value we've been sending is the default one (128), the bug
hasn't been noticed.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some applications such as Adobe FME append lots of parameters
here, making it easily overflow the current limit.
Signed-off-by: Martin Storsjö <martin@martin.st>
The spec says
9: Interlaced with bottom field displayed first and top field stored first
14: Interlaced with top field displayed first and bottom field stored first
And avcodec.h states
AV_FIELD_TB, //< Top coded first, bottom displayed first
AV_FIELD_BT, //< Bottom coded first, top displayed first
Reviewed-by: Dave Rice <dave@dericed.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The spec says:
"Mandatory elements with a default value may be left out of the file. In the absence
of a mandatory element, the element's default value is used."
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Attachment tags were being written targeting non-existent streams in the
output file.
Also filter filename and mimetype entries, as they are standard elements
in the Attachment master.
Signed-off-by: James Almer <jamrial@gmail.com>
Using the stream timebase simply overflows
Fix integer overflow in psp framerate computation
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The dynamic AVIOContext would get closed pointing to the wrong position
in the buffer.
This is a regression since 650e17d88b.
Reviewed-by: Dave Rice <dave@dericed.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Implements part of ticket #4347
Tested-by: Dave Rice <dave@dericed.com>
Tested-by: Jerome Martinez <jerome@mediaarea.net>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Printing the dynamic buffer offset is useless.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows us to be more selective about the streams we derive durations from
(specifically, ignoring text streams with outlier end times) in the common case
The durations are never written in that situation.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
when use use_localtime_mkdir to create multi level dir,
ffmpeg give error message:
ffmpeg -re -i ~/Movies/objectC/facebook.mp4 -c copy -use_localtime 1
-use_localtime_mkdir 1 -hls_segment_filename '%Y%m%d/file-%Y%m%d/%s.ts'
out.m3u8
error message:
Could not create directory 20160926/file-20160926 with use_localtime_mkdir
add mkdir_p for support the multi level dir
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Zuo Genyu <1515161258@qq.com> (Windows)
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
It is supposed to be a flag. The only currently defined value is
AVIO_SEEKABLE_NORMAL, but other ones may be added in the future.
However all the current lavf code treats this field as a bool (mainly
for historical reasons).
Change all those cases to properly check for AVIO_SEEKABLE_NORMAL.
Copy interrupt callback to slave format context to allow
user to interrupt IO. Copy format flags as well.
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Streaming servers appear to ignore all other language metadata.
Signed-off-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Josh de Kock <josh@itanimul.li>
Fixes gapless decoding. Adjust skip_samples field correctly in case of DISCARDed audio frames.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This way, in case of bit rate not being set, max_bitrate will be
used instead. This enables, for example, re-using max_bitrate
information from the input or doing transcoding with a rate
control mode that is not bit rate based.
Signed-off-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This assert can with crafted files fail, a warning is already printed
for this case.
Fixes assertion failure
Fixes:1/assert.avi
Found-by: 连一汉 <lianyihan@360.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.
There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters
The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).
Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Add an option to specify HTTP header in the WebM Chunk Muxer (this
works the same way as the 'method' parameter in the HLS muxer).
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This was introduced in bc2a32969e.
The whole block that the statement was added to is only
relevant when used as a demuxer, but the other statements
there have had other if statements guarding them. Make
sure to only run this whole block if being used as a
demuxer.
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Introduced in 00e122bc / bc2a3296
The whole block that the statement was added to is only
relevant when used as a demuxer, but the other statements
there have had other if statements guarding them. Make
sure to only run this whole block if being used as a
demuxer.
Fixes ticket #5844.
When there is only one stream and stream_index has not specified,
The ts has been transferd by the timebase of stream0 without modifying the stream_index
In this condation it cause seek failure.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
when split flv file by flv format at first, and cat flvs file
into one flv file, the flv sequence end is be used,
then the whole flv have many flv sequence end TAG.
this flags can give user an option to ignore write sequence end TAG
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add FLVFlags type, be used to add new FLVFlags options
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is mostly useful for muxers that wrap other muxers, such as dashenc
and segment. The actual duplicated bitstream filtering is largely harmless,
but delaying the header can cause problems when the muxer intended the header
to be written to a separate file.
ffmpeg have a generic solution working with all muxer named
output_ts_offset, output_ts_offset will instead of initial_offset
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Actual allocation size is computed as (count + 1)*sizeof(meta_keys), so
we need to check that (count + 1) won't cause overflow.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes regressions with stream copy and output timebase/fps being twice as fine as needed
Makes the timebase and ticks per frame handled identical which should make the
code easier to understand and work with. It does not solve the problem without
st->codec access
Suggested-by: Hendrik Leppkes
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Previously, we used a different list of checks when deciding whether to
write a set of tags at all than we did when deciding whether to write an
individual tag in the set. This resulted in sometimes writing an empty
tag master and seekhead. Now we use mkv_check_tag_name everywhere, so
if a dictionary is entirely composed of tags we skip, we don't write a
tag master at all.
This affected the test file, since "language" was on one list but not
the other, so we were writing an empty tag master there. The test hash
is updated to reflect that change.
This patch is a fix for the bug with ticket number 5812
(https://trac.ffmpeg.org/ticket/5812).
Basically, the bug is that the last segment and the "#EXT-X-ENDLIST"
tag are not being written to the subtitle playlist file when
converting a file with subtitles to the HLS format. The reason for
this seem to be that the filename for the subtitle file is being freed
too early. This solution is simply to free that memory after it's last
use in the "hls_window" function.
Signed-off-by: Franklin Phillips <franklinphillips9p8@inbox.lv>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
