The -shortest option (which finishes the output file at the time the
shortest stream ends) is currently implemented by faking the -t option
when an output stream ends. This approach is fragile, since it depends
on the frames/packets being processed in a specific order. E.g. there
are currently some situations in which the output file length will
depend unpredictably on unrelated factors like encoder delay. More
importantly, the present work aiming at splitting various ffmpeg
components into different threads will make this approach completely
unworkable, since the frames/packets will arrive in effectively random
order.
This commit introduces a "sync queue", which is essentially a collection
of FIFOs, one per stream. Frames/packets are submitted to these FIFOs
and are then released for further processing (encoding or muxing) when
it is ensured that the frame in question will not cause its stream to
get ahead of the other streams (the logic is similar to libavformat's
interleaving queue).
These sync queues are then used for encoding and/or muxing when the
-shortest option is specified.
A new option – -shortest_buf_duration – controls the maximum number of
queued packets, to avoid runaway memory usage.
This commit changes the results of the following tests:
- copy-shortest[12]: the last audio frame is now gone. This is
correct, since it actually outlasts the last video frame.
- shortest-sub: the video packets following the last subtitle packet are
now gone. This is also correct.
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
wrapped_avframe_decode() uses an AVFrame as dst in av_frame_move_ref()
after having called ff_decode_frame_props() to attach side-date
to this very frame. This leaks all the side-data and metadata
that ff_decode_frame_props() has attached.
This happens in various fate-filter-metadata tests since
6ca43a9675.
These particular leaks (which affect metadata-only)
could be fixed by not adding metadata side-data to AVPackets
in libavdevice if they are also available from the AVFrames.
Yet this would break users that extract the metadata from
AVPackets.
The changes to FATE happen because of the way av_dict_set()
works when it overwrites an already existing entry:
It overwrites the entry to be overwritten with the last entry
and adds the new entry at the end. The end result is that
the first entry of the dict is the second-to-last-entry of
the original dict, the last entry of the dict is the last
entry of the old dict and the first count - 2 entries
of the original dict are at positions 1..count - 2 in their
original order.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids an extra copy of potentially quite big video frames.
Instead of copying the entire frames data into a rawvideo packet it
packs the frame into a wrapped avframe packet and passes it through
as-is.
Unfortunately, wrapped avframes are set up to be video frames, so the
audio frames continue to be copied.
Additionally, this enabled passing through video frames that previously
were impossible to process, like hardware frames or other special
formats that couldn't be packed into a rawvideo packet.
For 422 frames we should not use hard coded 8 to calculate mb size for
uv plane. Chroma shift should be taken into consideration to be
compatiple with different sampling format.
The error is reported by fate test when av_cpu_max_align() return 64
on the platform supporting AVX512. This is a hidden error and it is
exposed after commit 17a59a634c.
mpeg2enc has a mechanism to reuse frames. When it computes SSE (sum of
squared error) on current mb, reconstructed mb will be wrote to the
previous mb space, so that the memory can be saved. However if the align
is 64, the frame is shared in somewhere else, so the frame cannot be
reused and a new frame to store reconstrued data is created. Because the
height of mb is wrong when compute sse on 422 frame, starting from the
second line of macro block, changed data is read when frame is reused
(we need to read row 16 rather than row 8 if frame is 422), and unchanged
data is read when frame is not reused (a new frame is created so the
original frame will not be changed).
That is why commit 17a59a634c exposes this
issue, because it add av_cpu_max_align() and this function return 64 on
platform supporting AVX512 which lead to creating a frame in mpeg2enc,
and this lead to the different outputs.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Some samples contain Active Format Descriptors, yet the output
of no test depends upon them, so that they are de-facto untested.
So add a dedicated test for them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Update the still AVIF parser to only read the primary item. With this
patch, AVIF still images with exif/icc/alpha channel will no longer
fail to parse.
For example, this patch enables parsing of files in:
https://github.com/AOMediaCodec/av1-avif/tree/master/testFiles/Microsoft
Adding two fate tests:
1) demuxing of still image with 1 item - this test will pass regardless
of this patch.
2) demuxing of still image with 2 items - this test will fail without
this patch and will pass with patch applied.
Partially fixes trac ticket #7621
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Zern <jzern@google.com>
- ff_pix_abs16_neon
- ff_pix_abs16_xy2_neon
In direct micro benchmarks of these ff functions verses their C implementations,
these functions performed as follows on AWS Graviton 3.
ff_pix_abs16_neon:
pix_abs_0_0_c: 141.1
pix_abs_0_0_neon: 19.6
ff_pix_abs16_xy2_neon:
pix_abs_0_3_c: 269.1
pix_abs_0_3_neon: 39.3
Tested with:
./tests/checkasm/checkasm --test=motion --bench --disable-linux-perf
Signed-off-by: Jonathan Swinney <jswinney@amazon.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Up until now, updating extradata was very ad-hoc: The amount of
space reserved for extradata was not recorded when writing the
header; instead the AAC code simply presumed that it was enough.
This commit changes this by recording how much space is available.
This brings with it that the code for writing of and reserving space
for the CodecPrivate and for updating it diverges. They are therefore
split; this allows to put other common tasks like seeking to
right offset as well as writing padding (in case the new extradata did
not fill the whole reserved space) to this common function.
The code for filling up the reserved space is smarter than the code
it replaces; therefore it is no longer necessary to reserve more
than necessary just to be sure that one can add an EBML Void element
(whose minimum size is two) lateron. This is the reason for the change
to the aac-autobsf-adtstoasc test.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible by using a dynamic buffer to write them;
said dynamic buffer is (re)used and reset as appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SSE3 instruction movdqa in ff_yuv2yuvX_sse3() expects a 16-byte aligned address for a memory address, or else a segfault is generated.
The src_pixels buffer below was not aligned to 16 bytes on the stack necessarily, so we got segfaults during fate-checkasm-sw_scale.
Therefore 16-byte align all of these local variables, aligning them too much shouldn't hurt.
- Introduce ff_draw_init2, which takes explicit colorspace and range
args
- Use lavu/csp and lavfi/colorspace for conversion, rather than the
lavu/colorspace.h macros
- Use the passed-in colorspace when performing RGB->YUV conversions
The upshot of this is:
- Support for YUV spaces other than BT601
- Better rounding for all conversions
- Particular rounding improvements in >8-bit formats, which previously
used simple left-shifts
- Support for limited-range RGB
- Support for full-range YUV in non-J pixfmts
Due to the rounding improvements, this results in a large number of
minor changes to FATE tests.
Signed-off-by: rcombs <rcombs@rcombs.me>
Fixes CID1396405
MSE and PSNR is slightly improved, and some noticable corruptions disappear as
well.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
The cue_sheet.wv sample contains a cue sheet as APE tags,
yet this is not really covered by fate-wavpack-cuesheet
because the metadata does not affect the output of said test.
So add a proper test for this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Use the md5 protocol instead of creating a file just to calculate
its MD5 checksum. This is possible because there are no output seeks
involved in any of these tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
log2() remains, this can either be replaced by a integer implementation or the table
hardcoded if needed
Tested-by: Anton Khirnov <anton@khirnov.net>
Tested-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The HEVC decoder can call these functions with smaller widths than the
functions themselves are designed to operate on so we should only check
the relevant output
Signed-off-by: J. Dekker <jdek@itanimul.li>
enc_dec() performs two ffmpeg runs - the first one encoding a source
file into a specified output format, the second one decoding previously
encoded file.
The arguments to this function currently have confusing names - e.g.
dec_opt contains _output_ (i.e. encoding) options for the second
(decoding) ffmpeg invocation. It is also possible to supply _input_
(i.e. decoding) options for the second ffmpeg run, but the argument
is currently unnamed and referred to by number.
Add an _in/_out suffix to argument names to make it clear what they are
used for. Give a name to input options for the decoding ffmpeg run.
Since every DLL can use an individual CRT on Windows, having
an exported function that opens a FILE* won't work if that
FILE* is going to be used from a different DLL (or from user
application code).
Internally within the libraries, the issue can be worked around
by duplicating the function in all libraries (this already happened
implicitly because the function resided in file_open.c) and renaming
the function to ff_fopen_utf8 (so that it doesn't end up exported from
the DLLs) and duplicating it in all libraries that use it.
This makes the avpriv_fopen_utf8 / ff_fopen_utf8 function work in
the exact same way as the existing avpriv_open / ff_open, with the
same setup as introduced in e743e7ae6e.
That mechanism doesn't work for external users, thus deprecate the
existing function.
Signed-off-by: Martin Storsjö <martin@martin.st>
Do this by making this test a transcode test.
Also fix the test requirements and don't add this test to FATE_AFILTER;
instead use a new variable and a new target for flvenc-tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also add a fate-filter-overlays target containing all these tests
and fix the requirements of the tests; furthermore, remove
unnecessary scale filters from filter-overlay-rgba?_rgba.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also fix the requirements of these tests: Only the anaglyph
tests need a scale filter, yet it has been inserted for all tests
without any check for its presence.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lots of tests use the framecrc command together with some filters,
so adding a special function for it seems worthwhile. This commit
adds one new one and modifies an already existing one:
All users of FILTERDEMDEC already use framecrc and the more general
FILTERDEMDECENCMUX can be used in scenarios where more control over
the used encoders/muxers is needed, so use this in cases where
an actual input file is involved.
Furthermore, add FILTERFRAMECRC for the cases where no demuxing/decoding
occurs, because the input is generated via lavfi.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unused and given that one needs an encoder to produce
packets from AVFrames (as output by filters) this is likely
to remain so, because FILTERDEMDECENCMUX is better for these
scenarios.
The only case where one can use filters without encoders is
with the lavfi input device: It outputs AVPackets which could
be copied without another conversion to AVFrames. Yet the variable
to check for this is CONFIG_LAVFI_INDEV, but FILTERDEMDECMUX
is designed to work with demuxers (i.e. CONFIG_*_DEMUXER).
So there is no usecase for FILTERDEMDECMUX.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
