If an error happens in vobsub_read_header() after allocating the
AVFormatContext intended to read the sub-file, both the AVFormatContext
as well as the data in the subtitles queues leaks. This has been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
vobsub_read_header() uses an AVBPrint to write a string and up until
now, it collected the string stored in the AVBPrint via
av_bprint_finalize(), which might involve an allocation and copy of the
string. But this is unnecessary, as the lifetime of the returned string
does not exceed the lifetime of the AVBPrint. So use the string in the
AVBPrint directly.
This also makes it possible to easily fix a memleak: In certain error
situations, the string stored in the AVBPrint would not be freed (if it
was dynamically allocated). This has been fixed, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the VobSub demuxer was added, the fields it required were simply
added to the MpegDemuxContext (if the VobSub demuxer was selected at
all). The mpeg demuxer of course doesn't use these fields even if they
are there; and the VobSub demuxer doesn't use the old ones: It opens an
mpeg subdemuxer of its own and uses this where a mpeg demuxer is
required. Hence the two contexts can be split, saving memory.
Furthermore several headers can now be moved to the section that is
guarded by #if CONFIG_VOBSUB_DEMUXER (this even includes avassert.h
which was unguarded and has been added in 9cde9f70 despite not being
used in that patch).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When parsing EBML lacing, for every number read, a new AVIOContext has
been initialized (via ffio_init_context()) just for this number. This
has been changed: The context is kept now.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When parsing the sizes of the frames in a lace fails, sometimes no
error message was raised (e.g. when using xiph or fixed-size lacing).
Only EBML lacing generated error messages (which were wrongly declared
as AV_LOG_INFO), but even here not all errors resulted in an error
message. So add a generic error message to catch them all.
Moreover, if parsing one of the EBML numbers fails, ebml_read_num already
emits its own error messages, so that all that is needed is a generic error
message to indicate that this happened during parsing the sizes of the
frames in a block; in other words, the error messages specific to
parsing EBML lace numbers can be and have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
870e7552 introduced validating the lace sizes when they are parsed and
removed the old check; yet when merging this libav commit in 6902c3ac,
the old check for whether the frame extends beyond the frame has been kept.
It is unnecessary and has been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, when an error happened in one of the inner loops in
matroska_parse_laces, a variable designated for the return value has
been set to an error value and break has been used to exit the
current loop/case. This was done so that the end of matroska_parse_laces
is reached, because said function allocated memory which is later used
and freed in the calling function and passed at the end of
matroska_parse_laces.
But given that there is no allocation any more, one can now return
immediately. And this commit does this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The maximal number of frames in a lace can be 256; hence one has a not
excessive upper bound on the size of an array that can hold the sizes of
all the frames in a lace. Yet up until now, said array has been
dynamically allocated. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
It avoids the overhead of function calls.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until c4e0e314, the seek table has been included in the tta
extradata, so that the size of said extradata was 22 (the size of a TTA1
header) + 4 * number of frames. The decoder rejected anything below a
size of 30 and so the Matroska demuxer exported 30 byte long extradata,
of which only 18 were set (it ignores a CRC-32 and simply leaves it at
0). But this is unnecessary since said commit, so reduce the size to 22.
Furthermore, replace 30 by 22 in a comment about the extradata size in
libavcodec/tta.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
That way one doesn't have to free later. In this case (concerning TTA
extradata), this also fixes a memleak when the output samplerate is
invalid.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This sets the range of the first automatically assigned PMT PID or elementary
stream PID parameters to [0x20, 0x1ffa]. You can still assign manually a PID
for a stream using AVStream->id in the wider [0x10, 0x1ffe] range as specified
by ISO13818-1. But since DVB and ATSC both reserves some PIDs, let's not allow
them to be automatically assigned.
Also make sure that assigned PID numbers are valid and fix the error message
for the previous PID collision checks.
Signed-off-by: Marton Balint <cus@passwd.hu>
Introduced since 077939626eeaa0c1364065414c18ab9b3a072281.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ff_flac_parse_picture() parses a buffer containing a flac metadata
picture block by wrapping it in an AVIOContext and using the AVIOContext
API. Consequently, when not enough data could be read AVERROR(EIO) was
returned although reading didn't really fail: A block that contains a
subfield whose size field indicates that it is so big as to extend
beyond the buffer is just invalid.
This commit changes this by using the bytestream2 API instead;
furthermore, the checks for whether there is enough data left are
performed before allocating a buffer for said data.
Finally, if the length of the picture description is bigger than
INT_MAX, it will now raise an error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
During parsing a flac picture metadata block, the mimetype is read as
follows: Its 32b size field is read and checked for being in the range
1..63; afterwards, the actual mimetype-string is read into a buffer of
size 64, where the length to read is the minimum of the length field and
the size of the destination buffer -1. Then an assert guards that length
is indeed < the size of the destination buffer before the string in the
buffer is zero-terminated.
The FFMIN as well as the assert are actually redundant, as it has
been checked that the string (even after terminating) fits into the
buffer. In order to make this clear, reword the check "len >= 64" to
"len >= sizeof(mimetype)" and drop the FFMIN as well as the assert.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com>
Reviewed-by: Jeyapal, Karthick <kjeyapal@akamai.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Put an AVIOContext whose lifetime doesn't extend beyond the function where
it is allocated on the stack instead of allocating and freeing it. This
also avoids the need to free it, which in this case fixes possible
memleaks on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small dynamic buffers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small dynamic buffers (i.e. small master elements).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small tags. Furthermore, it simplifies freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small extradata. Furthermore, it simplifies freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small headers. Furthermore, it simplifies freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
By using avio_get_dyn_buf() + ffio_free_dyn_buf() instead of
avio_close_dyn_buf() + av_free() one can avoid an allocation + copy for
small tags. Furthermore, it simplifies freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, using a dynamic buffer entailed at least three
allocations: One for the AVIOContext, one for the AVIOContext's opaque
(which, among other things, contains the small write buffer), and one
for the big buffer that is independently allocated that is returned when
calling avio_close_dyn_buf().
It is possible to avoid the third allocation if one doesn't use a
packetized dynamic buffer, if all the data written so far fit into the
write buffer and if one does not require the actual (big) buffer to have
an indefinite lifetime. This is done by making avio_get_dyn_buf() return
a pointer to the data in the write buffer if nothing has been written to
the main buffer yet. The dynamic buffer will then be freed using
ffio_free_dynamic_buffer (which needed to be modified not to call
avio_close_dyn_buf() internally).
So a typical use-case like:
size = avio_close_dyn_buf(dyn_pb, &buf);
do something with buf
av_free(buf);
can be converted to:
size = avio_get_dyn_buf(dyn_pb, &buf);
do something with buf
ffio_free_dynamic_buffer(&dyn_pb);
In more complex scenarios this can simplify freeing as well, because it
is now clear that freeing always has to be performed via
ffio_free_dynamic_buffer().
Of course, in case this saves an allocation it also saves a memcpy.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The extradata is not changed at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The decoder hardcodes that audio is stream_id = 1 so it does not
currently work with more or less than 1 video stream at st=0
Fixes: assertion failure
Fixes: 18602/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-6259277199310848
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This comment does not account for the fact that the limits on cluster
size and duration are configurable by the user since 98308bd4.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If mkv_write_trailer() is not called, the cached audio packet might
leak; so unref it in mkv_deinit().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
