Vittorio Giovara
cad40a3833
lavc: Drop deprecated deinterlace module
...
Deprecated in 03/2013.
2015-08-28 16:04:19 +02:00
Henrik Gramner
ab43beefab
x86inc: Drop SECTION_TEXT macro
...
The .text section is already 16-byte aligned by default on all supported
platforms so `SECTION_TEXT` isn't any different from `SECTION .text`.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-08-11 11:12:01 +02:00
Henrik Gramner
9f1245eb96
x86inc: Support arbitrary stack alignments
...
Change ALLOC_STACK to always align the stack before allocating stack space for
consistency. Previously alignment would occur either before or after allocating
stack space depending on whether manual alignment was required or not.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-08-11 11:04:11 +02:00
Henrik Gramner
4a53c758d2
x86: dcadsp: Avoid SSE2 instructions in SSE functions
...
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-08-11 09:22:46 +02:00
Henrik Gramner
ebaf571aca
x86: dct: Disable dct32_float_sse on x86-64
...
There is an SSE2 implementation so the SSE version is never used. The "SSE"
version also happens to contain SSE2 instructions on x86-64.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2015-08-02 08:41:45 +02:00
Vittorio Giovara
7c6eb0a1b7
lavc: AV-prefix all codec flags
...
Convert doxygen to multiline and express bitfields more simply.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-07-27 15:24:58 +01:00
Henrik Gramner
a344e5d094
x86: bswapdsp: Don't treat 32-bit integers as 64-bit
...
The upper halves are not guaranteed to be zero in x86-64.
Also use `test` instead of `and` when the result isn't used for anything other
than as a branch condition, this allows some register moves to be eliminated.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-07-17 20:02:28 +02:00
Vittorio Giovara
d42191c78b
configure: Factor out vp8dsp module
2015-07-17 18:46:24 +01:00
Vittorio Giovara
5cb4bdb2a0
configure: Factor out rv34dsp module
2015-07-17 18:46:24 +01:00
Vittorio Giovara
b7a4127a45
h264_qpel: Use the correct header
2015-06-12 17:02:48 +01:00
Michael Niedermayer
5e87080f2c
h264_weight: Fix SSSE3 biweight code with weights of 128
...
CC: libav-stable@libav.org
Sample-Id: test_bref.mp4
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-06-12 17:02:48 +01:00
James Almer
d68c05380c
x86: check for AV_CPU_FLAG_AVXSLOW where useful
...
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2015-05-31 12:07:11 +02:00
Michael Niedermayer
e4610300de
x86: cavs: Remove an unneeded scratch buffer
...
Simplifies the code and makes it build on certain compilers
running out of registers on x86.
CC: libav-stable@libav.org
Reported-By: mudler
2015-05-28 18:40:40 +02:00
Vittorio Giovara
848e86f74d
mpegvideo: Drop flags and flags2
...
They are just duplicates of AVCodecContext members so use those instead.
2015-05-22 15:34:39 +01:00
Luca Barbato
48aef27f52
x86: Put COPY3_IF_LT under HAVE_6REGS
...
It uses 6 registers, unbreaks building on hardened x86 system.
Bug-Id: gentoo/541930
CC: libav-stable@libav.org
2015-03-17 12:31:04 +01:00
Anton Khirnov
71f1ad37d8
lavc: do not compile fmtconvert unconditionally
...
Only ac3dec and dcadec use it.
2015-02-28 21:51:24 +01:00
Anton Khirnov
d74a8cb7e4
fmtconvert: drop unused functions
2015-02-28 21:51:24 +01:00
Carl Eugen Hoyos
36a6fb989b
hevc_deblock: Fix compilation with nasm
...
CC: libav-stable@libav.org
Bug-Id: 795
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2015-02-22 22:34:20 +00:00
Kieran Kunhya
9a738c27dc
v210enc: Add SIMD optimised 8-bit and 10-bit encoders
...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
2014-12-05 13:03:49 +00:00
Vittorio Giovara
9c12c6ff95
motion_est: convert stride to ptrdiff_t
...
CC: libav-stable@libav.org
Bug-Id: CID 700556 / CID 700557 / CID 700558
2014-11-24 01:30:10 +00:00
Henrik Gramner
2d91abade2
x86: h264_intrapred: Don't treat 32-bit integers as 64-bit
...
The upper halves are not guaranteed to be zero in x86-64.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-10-08 08:15:52 +00:00
Pascal Massimino
7a1d6ddd2c
xvid: Add C IDCT
...
Thanks to Pascal Massimino and Michael Militzer for relicensing as LGPL.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2014-09-02 14:41:13 -07:00
Diego Biurrun
95c0cec03a
idctdsp: Add global function pointers for {add|put}_pixels_clamped functions
...
These function pointers already existed in the ARM code. Adding them globally
allows calls to the function pointers to access arch-optimized versions of the
functions transparently.
2014-09-02 14:41:13 -07:00
Diego Biurrun
8d27bf1cff
x86: xvid: K&R formatting cosmetics
2014-08-27 05:58:04 -07:00
Diego Biurrun
dcb7c868ec
cosmetics: Make naming scheme of Xvid IDCT consistent with other IDCTs
2014-08-27 04:54:05 -07:00
Diego Biurrun
1f156af427
x86: xvid_idct: Drop unused definitions
2014-08-27 04:36:41 -07:00
Diego Biurrun
efd26bedec
build: Add explanatory comments to (optimization) blocks in the Makefiles
2014-08-15 02:55:21 -07:00
Diego Biurrun
835f798c7d
mpegvideo: cosmetics: Lowercase ugly uppercase MPV_ function name prefixes
2014-08-15 01:26:33 -07:00
Diego Biurrun
d35b94fbab
avcodec: Rename xvidmmx IDCT to xvid
...
The Xvid IDCT is not MMX-specific.
2014-08-08 11:13:30 -07:00
Diego Biurrun
84d173d3de
xvididct: Ensure that the scantable permutation is always set correctly
...
This fixes cases where the scantable permuation would get overwritten by
the general idctdsp initialization.
2014-08-08 11:13:29 -07:00
Diego Biurrun
a786c8259d
idct: Split off Xvid IDCT
...
The Xvid IDCT is only required to decode some Xvid-encoded MPEG-4 files,
so there is no point in having it as an unconditional part of idctdsp.
2014-08-01 01:25:18 -07:00
Diego Biurrun
4f8cf0dc4e
x86: build: Restore ordering of OBJS lines
2014-07-28 13:19:04 -07:00
Pierre Edouard Lepere
1a880b2fb8
hevc: SSE2 and SSSE3 loop filters
...
Additional contributions by James Almer <jamrial@gmail.com>,
Carl Eugen Hoyos <cehoyos@ag.or.at>, Fiona Glaser <fiona@x264.com> and
Anton Khirnov <anton@khirnov.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2014-07-26 15:01:01 +00:00
Diego Biurrun
7fb993d338
qpeldsp: Mark source pointer in qpel_mc_func function pointer const
2014-07-25 02:52:54 -07:00
Diego Biurrun
81b9bf3192
dct-test: Move arch-specific bits into arch-specific subdirectories
2014-07-21 01:10:11 -07:00
Diego Biurrun
5dcc201505
simple_idct: Move x86-specific declarations to a header in the x86 directory
2014-07-19 02:33:36 -07:00
Diego Biurrun
85cabb8d00
fdct: Move x86-specific declarations to a header in the x86 directory
2014-07-19 02:25:59 -07:00
Diego Biurrun
9e0b29911f
x86: dnxhdenc: Eliminate some unnecessary ifdefs
2014-07-18 09:58:17 -07:00
Diego Biurrun
8b0dd4942a
idctdsp: prettyprinting cosmetics
2014-07-18 07:51:03 -07:00
Diego Biurrun
b4987f7219
idct: Convert IDCT permutation #defines to an enum
...
Also rename the enum values to be consistent with other DCT permutations.
2014-07-18 07:51:03 -07:00
Diego Biurrun
2d60444331
dsputil: Split motion estimation compare bits off into their own context
2014-07-17 09:07:10 -07:00
Diego Biurrun
c23ce454b3
x86: dsputil: Coalesce all init files
...
This makes the init files match the structure of the dsputil split.
2014-07-17 03:32:56 -07:00
Diego Biurrun
acf91215c7
x86: dsputil: Avoid pointless CONFIG_ENCODERS indirection
...
The remaining dsputil bits are encoding-specific anyway.
2014-07-13 07:01:05 -07:00
Diego Biurrun
1173320249
dsputil: Drop unused bit_depth parameter from all init functions
2014-07-11 06:38:26 -07:00
Diego Biurrun
f46bb608d9
dsputil: Split off pixel block routines into their own context
2014-07-09 08:05:26 -07:00
Diego Biurrun
a9aee08d90
dsputil: Split off FDCT bits into their own context
2014-07-07 12:28:45 -07:00
Diego Biurrun
3c650efb81
dsputil: Move draw_edges() to mpegvideoencdsp
2014-07-06 14:48:50 -07:00
Diego Biurrun
c166148409
dsputil: Move pix_sum, pix_norm1, shrink function pointers to mpegvideoenc
2014-07-06 14:26:53 -07:00
Diego Biurrun
8d686ca59d
dsputil: Split off *_8x8basis to a separate context
2014-07-06 13:09:24 -07:00
Diego Biurrun
b0de1c7663
x86: build: Only compile FDCT code if MMX is enabled
...
All other files containing purely inline assembly are treated the same way.
2014-07-05 04:18:34 -07:00