* qatar/master:
APIChanges: document git revision for CODEC_CAP_SLICE_THREADS addition.
Introduce slice threads flag.
FATE: allow forcing thread-type when doing threaded fate runs.
Use av_log_ask_for_sample() where appropriate.
error: sort, pack, and align error code and string definitions
The stabilization period after version bumps should be one month, not one week.
applehttp: Expose the stream bitrate via metadata
doc: Add some initial docs on the applehttp demuxer
Provide a fallback version of the libm function trunc
libavdevice: Define _XOPEN_SOURCE for usleep
lavc: provide deprecated avcodec_thread_init until next major version
lavc: provide the opt.h header until the next bump
error: change AVERROR_EOF value
error: remove AVERROR_NUMEXPECTED
error: add error code AVERROR_OPTION_NOT_FOUND, and use it in opt.c
Conflicts:
libavcodec/h264.c
libavutil/error.c
libavutil/error.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
In output_packet(), move the pre_process_video_frame() call inside the
if (ist->decoding_needed) { } block. This way
pre_process_video_frame() is not called when stream-copy has been
selected.
Also simplify.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
AVERROR_NUMEXPECTED is used only in the image muxer and demuxer, and
has a too much specific meaning, which is better explained through a
log message. Thus it can be replaced by AVERROR(EINVAL).
This breaks API.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master: (37 commits)
In avcodec_open(), set return code to an error value only when an error occurs instead of unconditionally at the start of the function.
lavc: remove reference to opt.h from Makefile.
prefer avio_check() over url_exist()
avio: remove AVIO_* access symbols in favor of new AVIO_FLAG_* symbols
lavu: remove misc disabled cruft
lavu: remove FF_API_OLD_IMAGE_NAMES cruft
NOT PULLED lavu: remove FF_API_OLD_EVAL_NAMES cruft
lavc: remove misc disabled cruft.
lavc: remove the FF_API_INOFFICIAL cruft.
lavc: remove the FF_API_SET_STRING_OLD cruft.
lavc: remove the FF_API_USE_LPC cruft.
lavc: remove the FF_API_SUBTITLE_OLD cruft.
lavc: remove the FF_API_VIDEO_OLD cruft.
lavc: remove the FF_API_AUDIO_OLD cruft.
lavc: remove the FF_API_OPT_SHOW cruft.
lavc: remove the FF_API_MM_FLAGS cruft.
lavf: remove misc disabled cruft.
lavf: remove FF_API_INDEX_BUILT cruft
lavf: remove FF_API_URL_CLASS cruft.
lavf: remove FF_API_SYMVER cruft
...
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The problem with url_exist() is that it tries to open a resource in
RDONLY mode. If the file is a FIFO and there is already a reading
client, the open() call will hang.
By using avio_check() with access mode of 0, the second reading
process will check if the file exists without attempting to open it,
thus avoiding the lock.
Fix issue #1663.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Make AVIO_FLAG_ access constants work as flags, and in particular fix
the behavior of functions (such as avio_check()) which expect them to
be flags rather than modes.
This breaks API.
Use av_log() rather than fprintf(stderr, ...), and show information
related to the previous size/pixel format configuration.
Consistent with the corresponding message issued in case of audio
configuration change.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Redesign the way -aspect option is handled. This is done by making
ffmpeg read the sample aspect ratio set in the corresponding input
stream by default, and overriding it using the value specified by
-aspect.
If the output display aspect ratio is specified with -aspect, it is
set at the end of the filterchain, thus overriding the value set by
filters in the filterchain.
This implementation is more robust, since does not modify the
filterchain description (which was creating potential syntax errors).
Prefer parse_number_or_die() over atoi()/atol() parsing for the options:
-pass, -top, -vc, and -qscale.
Improve input validation.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Mostly useful for the audio-filters branch, to make more apparent the
distinction between configure_audio_filters() and
configure_video_filters().
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
I think the documentation of sameq is causing confusion and misuse of
this option.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
* qatar/master:
lavf: bump minor and add an APIChanges entry for avformat cleanup
lavf: get rid of ffm-specific stuff in avformat.h
Not pulled: avio: deprecate av_protocol_next().
avio: add a function for iterating though protocol names.
lavf: rename a parameter of av_sdp_create from buff->buf
lavf: rename avf_sdp_create to av_sdp_create.
lavf: make av_guess_image2_codec internal
avio: make URLProtocol internal.
avio: make URLContext internal.
lavf: mark av_pkt_dump(_log) for remove on $next+1 bump.
lavf: use designated initializers for all protocols
applehttp: don't use deprecated url_ functions.
avio: move two ff_udp_* functions from avio_internal to url.h
asfdec: remove a forgotten declaration of nonexistent function
avio: deprecate the typedef for URLInterruptCB
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
proto: include os_support.h in network.h
matroskaenc: don't write an empty Cues element.
lavc: add a FF_API_REQUEST_CHANNELS deprecation macro
avio: move extern url_interrupt_cb declaration from avio.h to url.h
avio: make av_register_protocol2 internal.
avio: avio_ prefix for url_set_interrupt_cb.
avio: AVIO_ prefixes for URL_ open flags.
proto: introduce listen option in tcp
doc: clarify configure features
proto: factor ff_network_wait_fd and use it on udp
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
psymodel: extend API to include PE and bit allocation.
avio: always compile dyn_buf functions
Remove unnecessary parameter from ff_thread_init() and fix behavior
Revert "aac_latm_dec: use aac context and aac m4ac"
configure: tell user if libva is enabled like the rest of external libs.
Add silence support for AV_SAMPLE_FMT_U8.
avio: make URL_PROTOCOL_FLAG_NESTED_SCHEME internal
avio: deprecate av_url_read_seek
avio: deprecate av_url_read_pause
ac3enc: NEON optimised extract_exponents
Conflicts:
libavcodec/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is done by adding a setsar filter at the beginning of the
configured filterchain.
This implementation is more robust, since does not modify the
filterchain description (which was creating potential syntax errors),
but directly modifies the filterchain structure.
This also changes the ffmpeg -aspect behavior, as following filters in
the filterchain can change the DAR/SAR set by the inserted setsar
filter.
Signed-off-by: Stefano Sabatini <stefano.sabatini-lala@poste.it>
Currently bits_per_raw_sample is exposed as an AVCodecContext option.
The option is not very useful, because ffmpeg 1) overwrites it with
a value from the upstream codec, or 2) it resets the value whenever
the video is resampled.
This patch adds the -bits_per_raw sample option to FFmpeg, and
caches the value like is done for the -pix_fmt option.
Example usage:
ffmpeg v210.avi -pix_fmt rgb48 -bits_per_raw_sample 10 out%d.dpx
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This reverts commit cb48e245e6.
Reason being we like pressing "q" to quit ffmpeg.
Conflicts:
ffmpeg.c
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The function was only used in opt_sample_fmt() for listing the sample
formats. Move list_fmts() functionality directly into
opt_sample_fmt().
Als fix the warning:
ffmpeg.c: In function ‘opt_audio_sample_fmt’:
ffmpeg.c:2877: warning: passing argument 1 of ‘list_fmts’ from incompatible pointer type
cmdutils.h:163: note: expected ‘void (*)(char *, int, int)’ but argument is of type ‘char * (*)(char *, int, enum AVSampleFormat)’
* newdev/master:
mov: set audio service type for AC-3 from bitstream mode in the 'dac3' atom.
Get audio_service_type for AC-3 based on bitstream mode in the AC-3 parser and decoder, and vice-versa for the AC-3 encoder.
Use audio_service_type to set stream disposition.
Add APIchanges entry for audio_service_type.
Add audio_service_type field to AVCodecContext for encoding and reporting of the service type in the audio bitstream.
configure: in check_ld, place new -l flags before existing ones
support @heading, @subheading, @subsubheading, and @subsubsection in texi2pod.pl
doc: update build system documentation
aacenc: indentation
aacenc: fix the side calculation in search_for_ms
vp8.c: rename EDGE_* to VP8_EDGE_*.
Conflicts:
doc/APIchanges
libavcodec/avcodec.h
libavcodec/version.h
libavcodec/vp8.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* newdev/master: (33 commits)
Fix an infinite loop when RoQ encoded generated a frame with a size greater than the maximum valid size.
Add kbdwin.o to AC3 decoder
Detect byte-swapped AC-3 and support decoding it directly.
cosmetics: indentation
Always copy input data for AC3 decoder.
ac3enc: make sym_quant() branch-free
cosmetics: indentation
Add a CPU flag for the Atom processor.
id3v2: skip broken tags with invalid size
id3v2: don't explicitly skip padding
Make sure kbhit() is in conio.h
fate: update wmv8-drm reference
vc1: make P-frame deblock filter bit-exact.
configure: Add the -D parameter to the dlltool command
amr: Set the AVFMT_GENERIC_INDEX flag
amr: Set the pkt->pos field properly to the start of the packet
amr: Set the codec->bit_rate field based on the last packet
rtsp: Specify unicast for TCP interleaved streams, too
Set the correct target for mingw64 dlltool
applehttp: Change the variable for stream position in seconds into int64_t
...
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/ac3dec.c
libavformat/avio.h
libavformat/id3v2.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Conio.h is a non-standard header and may not have kbhit()
prototyped. This fixes compile on OS/2 where the EMX version (we're
using a fork) of conio.h only has getch() and getche().
Signed-off-by: Mans Rullgard <mans@mansr.com>
Remove usage of tcgetattr and tcsetattr to modify terminal
parameters, and rely on ctrl-c to stop instead of pressing 'q'.
On systems with conio.h, keep the old behavior.
Changing the terminal settings causes problems if multiple instances
are running asynchronously on the same terminal, such as during a
parallel FATE run, or if the process crashes before restoring the
terminal. In both cases, the terminal state is messed up requiring
a manual reset.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Change "file:stream[:syncfile:syncstream]" to
"file.stream[:syncfile.syncstream]", the latter syntax is more
consistent with the stream identifier form printed by
av_dump_format(), and more readable. Both syntaxes are currently
accepted by the opt_map() code.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This makes dumped packet timestamps proper for streams with
timebases other than AV_TIME_BASE.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
(cherry picked from commit 5e33e7bdac)
It is pretty hopeless that other considerable projects will adopt
libavutil alone in other projects. Projects that need small footprint
are better off with more specialized libraries such as gnulib or rather
just copy the necessary parts that they need. With this in mind, nobody
is helped by having libavutil and libavcore split. In order to ease
maintenance inside and around FFmpeg and to reduce confusion where to
put common code, avcore's functionality is merged (back) to avutil.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
As a side effect of the last commit, avcodec_open() now calls it automatically,
so there is no longer any need for clients to call it.
Instead they should set AVCodecContext.thread_count.
avcodec_thread_free() is deprecated, and will be removed from avcodec.h at the
next MAJOR libavcodec bump.
Rename the functions to ff_thread_init/free, since they are now internal.
Wrappers are provided to maintain API compatibility.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit c0b102ca03)
As a side effect of the last commit, avcodec_open() now calls it automatically,
so there is no longer any need for clients to call it.
Instead they should set AVCodecContext.thread_count.
avcodec_thread_free() is deprecated, and will be removed from avcodec.h at the
next MAJOR libavcodec bump.
Rename the functions to ff_thread_init/free, since they are now internal.
Wrappers are provided to maintain API compatibility.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
No behavior change; this makes DTS reliable with the next patch.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 6b47495397)
Make avfilter_graph_free() free not only the internal structures, but
also the allocated graph, and set the graph pointer to NULL for
increased safety.
Simplify usage.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 4359288c56)
Make avfilter_graph_free() free not only the internal structures, but
also the allocated graph, and set the graph pointer to NULL for
increased safety.
Simplify usage.
Signed-off-by: Mans Rullgard <mans@mansr.com>
It's consistent with the -metadata option and easier to write.
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 87e4d9b252)
If audio_sync_method is >1 the resampler is used for audio drift
compensation, and do_audio_out() was causing an assert failure because
audio_resample was not set.
Fix issue 2516, which was introduced by SVN r25939.
Signed-off-by: Mans Rullgard <mans@mansr.com>
(cherry picked from commit 07b48f8c7a)
If audio_sync_method is >1 the resampler is used for audio drift
compensation, and do_audio_out() was causing an assert failure because
audio_resample was not set.
Fix issue 2516, which was introduced by SVN r25939.
Signed-off-by: Mans Rullgard <mans@mansr.com>
fixes issue2465.
The problem is that the ffmpeg (the app) -streamid option did not work
with -newaudio/-newvideo/-newsubtitle.
The cause was a conflict between the feature where streamid values were
reset to default for each output filename, and the implementation of
-new*, which requires that the -new* option be specified after the
target filename.
My patch changes the ffmpeg behavior so that user-specified streamid
values apply to all the following output files on the command line
(rather than just the next output filename.)
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
(cherry picked from commit 20ac9de3df)
fixes issue2465.
The problem is that the ffmpeg (the app) -streamid option did not work
with -newaudio/-newvideo/-newsubtitle.
The cause was a conflict between the feature where streamid values were
reset to default for each output filename, and the implementation of
-new*, which requires that the -new* option be specified after the
target filename.
My patch changes the ffmpeg behavior so that user-specified streamid
values apply to all the following output files on the command line
(rather than just the next output filename.)
Signed-off-by: Janne Grunau <janne-ffmpeg@jannau.net>
