'*src' and '*avctx' point to the same memory. It is enough to keep one of them.
Signed-off-by: Yu Yang <yuyang14@kuaishou.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The former is useless without the latter.
Reviewed-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
On 64 bit Operating System, sizeof(ScaleVulkanContext):
reduce from 2400 to 2392 on Linux
reduce from 2416 to 2408 on Windows
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
The following command is on how to apply passthrough option:
ffmpeg -init_hw_device vulkan -i input.264 -vf hwupload=extra_hw_frames=16,transpose_vulkan=passthrough=landscape,hwdownload,format=yuv420p output.264
Signed-off-by: Wu Jianhua <jianhua.wu@intel.com>
We don't use it. Was copied from libplacebo's recommended defaults.
Creates problems with validation on Intel devices, where the driver
still advertizes it, even though it's not usable without a swapchain.
No speex samples with non default frame sizes are known (to me)
the official speexenc seems to only generate the 3 default ones.
Thus it may be that the fuzzer samples where the first non default
values encountered by the decoder.
Possibly the "<" should be "!="
Fixes: out of array access
Fixes: 42821/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SPEEX_fuzzer-5640695772217344
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Users may take the description literally which leads to inverted
results.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Reviewed-by: Jun Zhao <barryjzhao@tencent.com
added "cache_redirect" option to http.
when enabled, requests issued after seek will use the latest redirected
url.
when disabled, each call to seek will revert to the original url that
was sent to http_open.
currently, the default remains 'enabled', until the next major
libavformat bump, where it will change to 'disabled'.
Very high stts sample deltas may occasionally be intended but usually
they are written in error or used to store a negative value for dts correction
when treated as signed 32-bit integers.
This option lets the user set an upper limit, beyond which the delta is clamped to 1.
Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
Unit is the track time scale. Default is UINT_MAX - 48000*10 which
allows upto a 10 second dts correction for 48 kHz audio streams while
accommodating 99.9% of uint32 range.
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 2147483542 + 128 cannot be represented in type 'int'
Fixes: 42812/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_APE_fuzzer-6344057861832704
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We do not support this as we multiply by 1000
Fixes: signed integer overflow: -45318575073853696 * 1000 cannot be represented in type 'long'
Fixes: 42804/clusterfuzz-testcase-minimized-ffmpeg_dem_LIVE_FLV_fuzzer-4630325425209344
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The whole concept is just not correct, also as it seems not to be needed
at all, all dng files i have decode without this.
Fixes: various crashes
Fixes: 42937/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-4625073334517760
Fixes: 42938/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-4643368217477120
Fixes: 42939/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-4925325908246528
Fixes: 42940/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-4925378806808576
Fixes: 42941/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-6202009265504256
Fixes: 42944/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_TIFF_fuzzer-6076860998483968
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This value is later passed to MediaCodec and checked at decoder init.
Notably decoding of 10-bit streams before this commit would "work" without
returning errors but only return garbage output (on most Android devices).
The V4L2M2M API operates asynchronously, so multiple packets can
be enqueued before getting a batch of frames back. Since it was
only possible to receive a frame by submitting another packet,
there wasn't a way to drain those excess output frames from when
avcodec_receive_frame() returned AVERROR(EAGAIN).
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Most of user data unregistered SEIs are privated data which defined by user/
encoder. currently, the user data unregistered SEIs found in input are forwarded
as side-data to encoders directly, it'll cause the reencoded output including some
useless UDU SEIs.
I prefer to add one option to enable/disable it and default is off after I saw
the patch by Andreas Rheinhardt:
https://patchwork.ffmpeg.org/project/ffmpeg/patch/AM7PR03MB66607C2DB65E1AD49D975CF18F7B9@AM7PR03MB6660.eurprd03.prod.outlook.com/
How to test by cli:
ffmpeg -y -f lavfi -i testsrc -c:v libx264 -frames:v 1 a.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 1 b.ts
ffmpeg -y -i a.ts -c:v libx264 -udu_sei 0 c.ts
# check the user data unregistered SEIs, you'll see two UDU SEIs for b.ts.
# and mediainfo will show with wrong encoding setting info
ffmpeg -i b.ts -vf showinfo -f null -
ffmpeg -i c.ts -vf showinfo -f null -
This fixes tickets #9500 and #9557.
Reviewed-by: "zhilizhao(赵志立)" <quinkblack@foxmail.com>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
This patch will fix following command:
ffmpeg -hwaccel vaapi -hwaccel_output_format vaapi -i input.264 \
-vf 'scale_vaapi=w=7680:h=4096' -c:v vp9_vaapi output.ivf
Max width of a vp9 tile is 4096. If the source frame > 4096, we need split to multiple tiles.
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Zhang yuankun <yuankunx.zhang@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The values for the essence element type were updated in the spec
from 0x05/0x06 (ST2019-4 2008) to 0x0C/0x0D (ST2019-4 2009).
Fixes ticket #6380.
Thanks-to: Philip de Nier <philip.denier@bbc.co.uk>
Thanks-to: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Matthieu Bouron <matthieu.bouron@gmail.com>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: division by zero
Fixes: 42814/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-4787014237552640
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: John-Paul Stewart <jpstewart@personalprojects.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: left shift of 255 by 24 places cannot be represented in type 'int'
Fixes: 42766/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_CDGRAPHICS_fuzzer-5142826105569280
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some DirectShow devices (Logitech C920 webcam) expose each DirectShow
format they support twice, once without and once with extended color
information. During format selection, both match, this patch ensures
that the format with extended color information is selected if it is
available, else it falls back to a matching format without such
information. This also necessitated a new code path taken for default
formats of a device (when user didn't request any specific video size,
etc), because the default format may be one without extended color
information when a twin with extended color information is also
available. Getting the extended color information when available is
important as it allows setting the color space, range, primaries,
transfer characteristics and chroma location of the stream provided by
dshow, enabling users to get more correct color automatically out of
their device.
Closes: #9271
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
Enabled discovering a DirectShow device's color range, space, primaries,
transfer characteristics and chroma location, if the device exposes that
information. Sets them in the stream's codecpars.
Co-authored-by: Valerii Zapodovnikov <val.zapod.vz@gmail.com>
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
fftools now print info about what media type(s), if any, are provided by
sink and source avdevices.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
The list returned by get_device_list now contains info about what media
type(s), if any, can be provided by each device.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
An avdevice, regardless of whether its category says its an audio or
video device, may provide access to devices providing different media
types, or even single devices providing multiple media types. Also, some
devices may provide no media types. dshow is an example encompassing all
of these cases. Users should be provided with this information, so
AVDeviceInfo is extended to provide it.
Bump avdevice version
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Reviewed-by: Roger Pack <rogerdpack2@gmail.com>
