Do this by making this test a transcode test.
Also fix the test requirements and don't add this test to FATE_AFILTER;
instead use a new variable and a new target for flvenc-tests.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also add a fate-filter-overlays target containing all these tests
and fix the requirements of the tests; furthermore, remove
unnecessary scale filters from filter-overlay-rgba?_rgba.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also fix the requirements of these tests: Only the anaglyph
tests need a scale filter, yet it has been inserted for all tests
without any check for its presence.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lots of tests use the framecrc command together with some filters,
so adding a special function for it seems worthwhile. This commit
adds one new one and modifies an already existing one:
All users of FILTERDEMDEC already use framecrc and the more general
FILTERDEMDECENCMUX can be used in scenarios where more control over
the used encoders/muxers is needed, so use this in cases where
an actual input file is involved.
Furthermore, add FILTERFRAMECRC for the cases where no demuxing/decoding
occurs, because the input is generated via lavfi.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unused and given that one needs an encoder to produce
packets from AVFrames (as output by filters) this is likely
to remain so, because FILTERDEMDECENCMUX is better for these
scenarios.
The only case where one can use filters without encoders is
with the lavfi input device: It outputs AVPackets which could
be copied without another conversion to AVFrames. Yet the variable
to check for this is CONFIG_LAVFI_INDEV, but FILTERDEMDECMUX
is designed to work with demuxers (i.e. CONFIG_*_DEMUXER).
So there is no usecase for FILTERDEMDECMUX.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Its performance loss ranges from either being just as fast as individual loads
(Skylake), a few percent slower (Alderlake), 8% slower (Zen 3), to completely
disasterous (older/other CPUs).
Sadly, gathers never panned out fast on x86, even with the benefit of time and
implementation experience.
This also saves a register, as there's no need to fill out an additional
register mask.
Zen 3 (16384-point transform):
Before: 1561050 decicycles in av_tx (fft), 131072 runs, 0 skips
After: 1449621 decicycles in av_tx (fft), 131072 runs, 0 skips
Alderlake:
2% slower on big transforms (65536), to 1% (131072), to a few percent for smaller
sizes.
ERContext currently has an embedded MECmpContext, despite only
needing exactly one function from it. This is wasteful because
MECmpContext is pretty large (135 pointers, 1080 B for eight byte
pointers). So keep only what is needed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add support for AVIF muxing in the image2 muxer.
Tested with this example:
ffmpeg -lavfi testsrc=duration=1:size=320x320 -g 1 -flags global_header -c:v libaom-av1 -f image2 img-%2d.avif
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
av_dict_set() expects a different set of flags, namely the AV_DICT_*
flags. Using AV_OPT_FLAG_DECODING_PARAM (or any AV_OPT_FLAG_*) ic
av_dict_set() is therefore completely wrong and given that av_dict_set()
just doesn't care about whether the string it receives has anything
to do with a decoding parameter or not, it should just be removed
without replacement.
(The numerical value of AV_OPT_FLAG_DECODING_PARAM currently coincides
with AV_DICT_IGNORE_SUFFIX. Given that the dictionaries we are dealing
with here are always empty (i.e. NULL) before the calls to
av_dict_set(), this flag changes nothing. It would be different if
it were equal to one of the AV_DICT_DONT_STRDUP_* values.)
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Move AC3HeaderInfo into ac3_parser_internal.h and the rest
into a new header ac3defs.h.
This also breaks an include cycle of ac3.h and ac3tab.h
(the latter now only needs ac3defs.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add an AVIF muxer by re-using the existing the mov/mp4 muxer.
AVIF Specification: https://aomediacodec.github.io/av1-avif
Sample usage for still image:
ffmpeg -i image.png -c:v libaom-av1 -still-picture 1 image.avif
Sample usage for animated AVIF image:
ffmpeg -i video.mp4 animated.avif
We can re-use any of the AV1 encoding options that will make
sense for image encoding (like bitrate, tiles, encoding speed,
etc).
The files generated by this muxer has been verified to be valid
AVIF files by the following:
1) Displays on Chrome (both still and animated images).
2) Displays on Firefox (only still images, firefox does not support
animated AVIF yet).
3) Verified to be valid by Compliance Warden:
https://github.com/gpac/ComplianceWarden
Fixes the encoder/muxer part of Trac Ticket #7621
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Add a parameter to omit seq header when generating the av1C atom.
For now, this does not change any behavior. This will be used by a
follow-up patch to add AVIF support.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Add a parameter to libaom-av1 encoder to enforce some of the single
image constraints in the AV1 encoder. Setting this flag will limit
the encoder to producing exactly one frame and the sequence header
that is produced by the encoder will be conformant to the AVIF
specification [1].
Part of Fixing Trac ticket #7621
[1] https://aomediacodec.github.io/av1-avif
Signed-off-by:: Vignesh Venkatasubramanian <vigneshv@google.com>
Fix for f125c504d8, requested_sample_rate
and such should be used.
Signed-off-by: Diederick Niehorster <dcnieho@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fix ticket: 9238
In parse_playlist, the discont_program_date_time should be used after
EXT-X-PROGRAM-DATE-TIME tag parsed.
Tested-by: pero
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
The general demuxing API uses bitstream filters to extract extradata
and the muxing API uses them in order to transform packets into
the format desired by the target format. Therefore FFStream contains
pointers to AVBSFContexts and lavf/internal.h includes lavc/bsf.h.
Yet actually, only a few files files are supposed to use these,
namely avformat.c, demux.c and mux.c. For all the other files,
it should be an opaque type that they should not touch and that
they need not know anything about. This can be achieved by not
including these headers and using the structs instead of the
corresponding typedefs.
This also forces translation units that really use the BSF API
themselves to include lavc/bsf.h directly instead of relying on
indirect inclusions (a few other files also use the BSF API;
they already abided by this).
Of course, it also avoids unnecessary rebuilds when bsf.h changes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The general decoding API uses bitstream filters and an AVFifo
and therefore AVCodecInternal contains pointers to an AVBSFContext
and to an AVFifo and lavc/internal.h includes lavc/bsf.h and
lavu/fifo.h.
Yet actually, only two files are supposed to use these, namely
avcodec.c and (mainly) decode.c. For all the other files,
it should be an opaque type that they should not touch and that
they need not know anything about. This can be achieved by not
including these headers and using the structs instead of the
corresponding typedefs.
This also forces translation units that really use the BSF
and the FIFO APIs themselves to include the relevant headers
directly instead of relying on indirect inclusions (up until now,
even avcodec.c and decode.c relied on fifo.h to be included
by internal.h).
Of course, it also avoids unnecessary rebuilds when bsf.h or fifo.h
change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Left shifts of signed types are UB unless the results fit
into the type. (Furthermore the value to be shifted need to be
nonnegative.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
sdl2 recently changed their versioning, moving the patch level to minor level
cd7c2f1de7
and have said that they will instead ship sdl3.pc for 3.0.0
Fixes ticket 9768
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
Signed-off-by: Gyan Doshi <ffmpeg@gyani.pro>
