Dimensions are normally specified as width x height, and this will match
the same option to libaom-av1.
Remove the indirection through the private context at the same time.
The tile_rows/cols options currently do a confusingly different thing to
the options of the same name on other encoders like libvpx and libaom.
There is no backward-compatibility reason to implement the log2 behaviour
as there was for libaom, so just get rid of them entirely.
Several cbs-functions had an unused CodedBitstreamContext parameter.
This commit removes these.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit follows the same logic as 061a0c14bb, but for the encode API: The
new public encoding API will no longer be a wrapper around the old deprecated
one, and the internal API used by the encoders now consists of a single
receive_packet() callback that pulls frames as required.
amf encoders adapted by James Almer
librav1e encoder adapted by James Almer
nvidia encoders adapted by James Almer
MediaFoundation encoders adapted by James Almer
vaapi encoders adapted by Linjie Fu
v4l2_m2m encoders adapted by Andriy Gelman
Signed-off-by: James Almer <jamrial@gmail.com>
ff_vaapi_encode_close() is not enough to free the resources like cbs
if initialization failure happens after codec->configure (except for
vp8/vp9).
We need to call avctx->codec->close() to deallocate, otherwise memory
leak happens.
Add FF_CODEC_CAP_INIT_CLEANUP for vaapi encoders and deallocate the
resources at free_and_end inside avcodec_open2().
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Use desc->log2_chroma_w/h to calculate the sps->conf_win_right/bottom_offset.
Based on Table 6-1, SubWidthC and SubHeightC depend on chroma format(log2_chroma_w/h).
Based on D-28 and D-29, set the correct cropped width/height.
croppedWidth = pic_width_in_luma_samples −
SubWidthC * ( conf_win_right_offset + conf_win_left_offset );
croppedHeight = pic_height_in_luma_samples −
SubHeightC * ( conf_win_bottom_offset + conf_win_top_offset );
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Following b8c45bbcbc207293f955e838ea66106f4b65b1ac they contain allocated
unit arrays which will get leaked. These operations were inconsistently
applied and never actually needed (the old uninit left them in the correct
state), so just drop them entirely.
Currently, a fragment's unit array is constantly reallocated during
splitting of a packet. This commit changes this: One can keep the units
array by distinguishing between the number of allocated and the number
of valid units in the units array.
The more units a packet is split into, the bigger the benefit.
So MPEG-2 benefits the most; for a video coming from an NTSC-DVD
(usually 32 units per frame) the average cost of cbs_insert_unit (for a
single unit) went down from 6717 decicycles to 450 decicycles (based
upon 10 runs with 4194304 runs each); if each packet consists of only
one unit, it went down from 2425 to 448; for a H.264 video where most
packets contain nine units, it went from 4431 to 450.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
When making a new P-frame when B-frames are present the previous P-frame
is normally in the DPB because it will be referred to by subsequent
B-frames. However, this is not true if there are no B-frames, or in edge
cases where a GOP ends with two P-frames. Fix this by adding the direct
ref pics to the RPS explicitly.
Fixes#7699.
Tested-by: Ullysses A Eoff <ullysses.a.eoff@intel.com>
This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available. At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.
It also adds flags to explicitly track the available features of the
different codecs. The new structure also allows open-GOP support, so
that is now available for codecs which can do it.
Sets the level based on the stream properties if it is not explicitly
set by the user. Also add a tier option to set general_tier_flag, since
that affects the level choice.
Set profile compatibility/constraint flags properly (including the
constraint flags used for RExt profiles, as all streams we can currently
generate are RExt-compatible), and use that to add support for the "Main
Intra" and "Main 10 Intra" RExt subprofiles (for which we can re-use the
existing Main and Main10 VAAPI profiles).
Add a larger warning more clearly explaining the consequences of missing
packed header support in the driver. Also only write the extradata if the
user actually requests it via the GLOBAL_HEADER flag.
Choose what types of reference frames will be used based on what types
are available, and make the intra-only mode explicit (GOP size one,
which must be used for MJPEG).
This was added in libva 2.1.0 (VAAPI 1.1.0). Use AVCodecContext.qmax,
matching the existing behaviour for qmin, and clean up the defaults so
that we only pass min/max when explicitly set.
Query which modes are supported and select between VBR and CBR based
on that - this removes all of the codec-specific rate control mode
selection code.
Previously there was one fixed choice for each codec (e.g. H.265 -> Main
profile), and using anything else then required an explicit option from
the user. This changes to selecting the profile based on the input format
and the set of profiles actually supported by the driver (e.g. P010 input
will choose Main 10 profile for H.265 if the driver supports it).
The entrypoint and render target format are also chosen dynamically in the
same way, removing those explicit selections from the per-codec code.
'-sei xxx' is added to control SEI insertion, so far only mastering
display colour volume is available for testing.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
* commit 'ce5870a3a8f2b10668ee4f04c2ae0287f66f31b2':
cbs: Refcount all the things!
Some changes for bitstream API.
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit '67eb2b16daa77f6ba3e04a28ca18e53193723b7f':
vaapi_h265: Mark unused entries in RefPicList[01] as explicitly invalid
Merged-by: Mark Thompson <sw@jkqxz.net>
This makes it easier for users of the CBS API to get alloc/free right -
all subelements use the buffer API so that it's clear how to free them.
It also allows eliding some redundant copies: the packet -> fragment copy
disappears after this change if the input packet is refcounted, and more
codec-specific cases are now possible (but not included in this patch).
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8aca3f65b6fdd117b1cb66a7409a7fd1.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit 'f940c859c23ae201b0170cf541ea8f6b7a52dd49':
Revert "vaapi_h265: Reduce the amount of padding in the stream"
Merged-by: James Almer <jamrial@gmail.com>
This reverts commit a14a12ca137bf1526452b97bedfc9f7b301d4e04.
The CTU size is always 32x32; the surface size is what actually sets
the desired property, and it is already correct.
