If the edit lists remove parts of the output timeline, or add a
delay to it, this should be included in the mvhd/tkhd/mdhd durations,
which should correspond to the edit lists.
For tracks starting with pts < 0, the edit list trims out the segment
before pts=0. For tracks starting with pts > 0, a delay element is
added in the edit list, delaying the start of the track data.
In both cases, the practical effect is that the post-edit output
is as if the track had started with pts = 0. Thus calculate the range
from pts=0 to end_pts, for the purposes of mvhd/tkhd/mdhd, unless
edit lists explicitly are disabled.
mov_write_edts_tag needs to operate on the actual pts duration of
the track samples, not the duration that already takes the edit
list effect into account.
Signed-off-by: Martin Storsjö <martin@martin.st>
DAV files may contain a variable length padding in between chunks
filled with 0xff bytes. The current skipping logic is incorrect as it
may skip over DHAV chunks not appearing sequentially in the file.
We now look for the 'DHAV' tag using a byte-by-byte search in order
to handle such situations. Also the dhav->last_good_pos field will
not be updated while skipping unrecognized data.
Two tests check the opposite pointer before using it. If only one of these
is set to a valid pointer, one of these functions will crash, the other will
ignore the pointer.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: shift exponent 64 is too large for 64-bit type 'unsigned long long'
Fixes: 26497/clusterfuzz-testcase-minimized-ffmpeg_dem_AVI_fuzzer-5690188355076096
Fixes: 26903/clusterfuzz-testcase-minimized-ffmpeg_dem_LUODAT_fuzzer-5641466929741824
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These fields were added to support -merge_pmt_versions, but the mpegts demuxer
is also keeping track its programs internally, so that should be a better place
to handle it.
Also it is not a very good idea to keep fields like program_num or
pmt_stream_idx in an AVStream, because a single stream can be part of multiple
programs, multiple PMTs, so the stream attributes can refer to any program the
stream is part of.
Since they are not part of public API, lets simply remove them, or rather
replace them with placeholders for ABI compatibility with libavdevice.
Signed-off-by: Marton Balint <cus@passwd.hu>
Also make sure we are checking the old state of the streams because otherwise
some streams might already have the newly parsed stream identifiers which
corrupts matching.
Fixes streams having the same identifier mixed up on pmt version change.
Fixes ticket #9006.
Signed-off-by: Marton Balint <cus@passwd.hu>
Otherwise there can be a small period when the programs only contain the PMT
pid.
Also make sure skip_clear only affects AVProgram clear, and that pmt_pid is
always kept as the first entry of the PID list of the programs. Also reject
PMTs for programs on the wrong PID.
Signed-off-by: Marton Balint <cus@passwd.hu>
PID 0 was removed from the pid list when then PMT was parsed, it is better
to explictly avoid it from being discarded instead of keeing it in the list of
every program.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_new_program returns the existing program if that already exists, in that
case it makes no sense to overwrite existing attributes.
Signed-off-by: Marton Balint <cus@passwd.hu>
Currently skip_samples is set to start_pad if sample_time is lesser or
equal to 0. This can cause issues if the stream starts with packets that
have negative pts. Calling avformat_seek_file() with ts set to 0 on such
streams makes the mov demuxer return the right corresponding packets
(near the 0 timestamp) but set skip_samples to start_pad which is
incorrect as the audio decoder will discard the returned samples
according to skip_samples from the first packet it receives (which has
its timestamp near 0).
For example, considering the following audio stream with start_pad=1344:
[PKT pts=-1344] [PKT pts=-320] [PKT pts=704] [PKT pts=1728] [...]
Calling avformat_seek_file() with ts=0 makes the next call to
av_read_frame() return the packet with pts=-320 and a skip samples
side data set to 1344 (start_pad). This makes the audio decoder
incorrectly discard (1344 - 320) samples.
This commit makes the move demuxer adjust skip_samples according to the
stream start_pad, seek timestamp and first sample timestamp.
The above example will now result in av_read_frame() still returning the
packet with pts=-320 but with a skip samples side data set to 320
(src_pad - (seek_timestamp - first_timestamp)). This makes the audio
decoder only discard 320 samples (from pts=-320 to pts=0).
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 9223372036854775807 + 32768 cannot be represented in type 'long'
Fixes: 27744/clusterfuzz-testcase-minimized-ffmpeg_dem_DHAV_fuzzer-5179319491756032
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: division by 0
Fixes: 28597/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-5752201490333696
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add 2 new options:
- reconnect_on_http_error - a list of http status codes that should be
retried. the list can contain explicit status codes / the strings
4xx/5xx.
- reconnect_on_network_error - reconnects on arbitrary errors during
connect, e.g. ECONNRESET/ETIMEDOUT
the retry employs the same exponential backoff logic as the existing
reconnect/reconnect_at_eof flags.
related tickets:
https://trac.ffmpeg.org/ticket/6066https://trac.ffmpeg.org/ticket/7768
Signed-off-by: Marton Balint <cus@passwd.hu>
This can be used to receive the raw mpegts stream from a SAT>IP
server, by letting avformat handle the RTSP/RTP/UDP negotiation
and setup, but then simply passing the MP2T stream through
instead of demuxing it further.
For example, this command would demux/remux the mpegts stream:
SATIP_URL='satip://192.168.1.99:554/?src=1&freq=12188&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34&pids=0,17,18,167,136,47,71'
ffmpeg -i $SATIP_URL -map 0 -c copy -f mpegts -y remux.ts
Whereas this command will simply write out the raw stream, with
the original PAT/PMT/PIDs intact:
ffmpeg -rtsp_flags satip_raw -i $SATIP_URL -map 0 -c copy -f data -y raw.ts
Signed-off-by: Aman Karmani <aman@tmm1.net>
Fixes: 1.21126e+111 is outside the range of representable values of type 'int'
Fixes: 27398/clusterfuzz-testcase-minimized-ffmpeg_dem_CAF_fuzzer-5412960339755008
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The earlier code would not complain if the remaining size was one byte
short of the desired size; and the way it performed the check could run
into signed integer overflow.
Fixes: signed integer overflow: 9223372036854775807 + 1 cannot be represented in type 'long'
Fixes: Timeout
Fixes: 26434/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-5752845451919360
Fixes: 26444/clusterfuzz-testcase-minimized-ffmpeg_dem_BINK_fuzzer-4697773380993024
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
SMVJPEG stores frames as slices of a big JPEG image. The decoder is
implemented as a wrapper that instantiates a full internal MJPEG
decoder, then forwards the decoded frames with offset data pointers.
This is unnecessarily complex and fragile, not supporting useful decoder
capabilities like direct rendering.
Re-implement the decoder inside the MJPEG decoder, which is accomplished
by returning each decoded frame multiple times, setting cropping
information appropriately on each instance.
One peculiar aspect of the previous design is that since
- the smvjpeg decoder returns one frame per input packet
- there are multiple frames in each packets (the aformentioned slices)
the demuxer needs to return each packet multiple times.
This is now also eliminated - the demuxer now returns each packet
exactly once, with the duration set to the number of frames it decodes
to.
This also removes one of the last remaining internal uses of the old
video decoding API.
Factor out the code into a separate muxing-specific function.
Stop accessing the deprecated AVStream-embedded codec context, use the
average framerate (if specified) instead.
