The WebP muxer sometimes caches a packet it receives to write it later;
yet if a cached packet is too small (so small as to be invalid),
it is cached, but not written and not unreferenced. Such a packet leaks,
either by being overwritten by the next packet or because it is never
unreferenced at all.
Fix this by not caching unusable packets at all; and error out on
invalid packets.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Replace it in ipmovie_read_header() by AVFormatInternal.parse_pkt
which is unused when reading the header.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
They will be discarded anyway because this can only happen
for invalid data. This already implies that the pkt won't be used
at all when parsing the very first chunk when reading the header,
so one can use NULL as argument and remove the av_packet_unref()
on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When one of these errors happens during ipmovie_read_packet(),
an error is returned and the packet is cleaned up generically.
And since 712d3ac539 the same happens
in ipmovie_read_header().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Replace it by using AVFormatInternal.parse_pkt which is otherwise unused
when reading a header.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Before 8d78e90a6b the Matroska demuxer
used stack packets to hold temporary packets; now it uses a temporary
packet allocated by the Matroska demuxer. Yet because it used stack
packets the code has always properly reset the packet on error, while
on success these temporary packets were put into a packet list via
avpriv_packet_list_put(), which already resets the source packet.
This means that this code is compatible with just reusing
AVFormatInternal.parse_pkt (which is unused while one is in the
demuxer's read_packet() function). Compared to before 8d78e90a6
this no longer wastes one initialization per AVPacket read
(the resetting of the stack packet performed by av_packet_move_ref()
in avpriv_packet_list_put() was for naught).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Originally added in 12f996edfa
behind #if 0; aebb56e184 then
removed the #if and replaced it by using av_dlog. Then commit
1a3eb042c7 replaced this with av_log
at trace level. Yet the code block always stayed within { }
at an increased level of indentation.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This makes av_read_frame() return packets with proper timestamps.
As a result, seeking now works in combination with streamcopy.
A FATE-test for this has been added.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Currently, ff_read_packet() sometimes forwards the return value of
AVInputFormat.read_packet() (which should be zero on success, but isn't
for all demuxers) and sometimes it overwrites this with zero.
Furthermore, it uses two variables, one for the read_packet return value
and one for other errors, which is a bit confusing; it is also
unnecessary given that the documentation explicitly states that
ff_read_packet() never returns positive values. Returning a positive
value would lead to leaks with some callers (namely asfrtp_parse_packet
and estimate_timings_from_pts). So always return zero in case of
success.
(This behaviour stems from a time before av_read_packet sanitized
the return value of read_packet at all: It was added in commit
626004690c and was unnecessary since
88b00723906f68b7563214c30333e48888dddf78.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This field needs to be replaced altogether, not just its type changed.
This will be done in a separate change.
Signed-off-by: James Almer <jamrial@gmail.com>
When extended atom size support was added to probing in
fec4a2d232, the buffer
size check was backwards, but probing continued to work
because there was no minimum size check yet, so despite
size being 1 on these atoms, and failing to read the 64-bit
size, the tag was still correctly read.
When 0b78016b2d introduced a
minimum size check, this exposed the bug, and broke probing
any files with extended atom sizes, such as entirely valid
large files that start whith mdat atoms.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Commit 6973df1122 added support
for music tracks by outputting its two containing tracks
together in one packet. But the actual data is not contiguous
in the file and therefore one can't simply use av_get_packet()
(which has been used before) for it. Therefore the packet was
now allocated via av_new_packet() and read via avio_read();
and this is also for non-music files.
This causes problems because one can now longer rely on things
done automatically by av_get_packet(): It automatically freed
the packet in case of errors; this lead to memleaks in several
FATE-tests covering this demuxer. Furthermore, in case the data
read is less than the data desired, the returned packet was not
zero-allocated (the packet's padding was uninitialized);
for music files the actual data could even be uninitialized.
The former problems are fixed by using av_get_packet() for
non-music files; the latter problem is handled by erroring out
unless both tracks could be fully read.
Reviewed-by: Zane van Iperen <zane@zanevaniperen.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Always leaving said packet in a blank state after having used it
allows to avoid having to reset it before one uses it; and it also
allows to use it in more places than just in parse_packet() here.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 9223372036854775807 + 536870912 cannot be represented in type 'long'
Fixes: 31678/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-5614204619980800
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And forward it to the underlying UDP protocol.
Fixes ticket #7517.
Signed-off-by: Jiangjie Gao <gaojiangjie@live.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Add the "http_proxy" option and its handling to the "tls" protocol,
pass the option from the "https" protocol.
The "https" protocol already defines the "http_proxy" command line
option, like the "http" protocol does. The "http" protocol properly
honors that command line option in addition to the environment
variable. The "https" protocol doesn't, because the proxy is
evaluated in the underlying "tls" protocol, which doesn't have this
option, and thus only handles the environment variable, which it
has access to.
Fixes#7223.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
These files are technically a series of planar mono tracks.
If the "music" flag is set, merge the packets from the two
mono tracks, essentially replicating:
[0🅰️0][0🅰️1]join=inputs=2:channel_layout=stereo[a]
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
These are auxiliary side-data functions, so they should have been
switched to size_t in d79e0fe65c,
but this has been forgotten.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
64 bits are needed in order to retain the uid values of Matroska
chapters; the type is kept signed because the semantics of NUT chapters
depend upon whether the id is > 0 or < 0.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, there has been no check that each chapter has a unique id;
there was only a check for whether a chapter id is zero (this happens
often when the chapters originated from a format that lacks the concept
of chapter id and simply counts from zero) which is invalid in Matroska.
In this case the chapter ids are offset by 1 to make them nonnegative.
Yet offsetting won't fix duplicate ids, therefore this is changed to
simply create new chapter uids when the input chapter uids don't conform
to the requirements of Matroska (in which case it can be presumed that
they did not originate from Matroska, so that we don't need to bother
to preserve them).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The test program for the FIFO muxer allocates a buffer without padding
and wraps it into a packet via av_packet_from_data(). This is an API
violation. Furthermore, said buffer leaks in case av_packet_from_data()
fails. Fix both of these issues by using av_new_packet() instead.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also factor allocating and freeing the packet out.
Fixes Coverity issues #1473722 and #1473723; it is a regression
since 4b386b2059.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It was introduced in d3d9b1fc8e2dfc8b4d66c9916ab7221062ff4660;
Fixes Coverity issue #733800.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one of the two results of a ternary conditional is a pointer to void,
the type of the whole conditional operator is a pointer to void, even
when the other possible result is not a pointer to void. This loophole
in the type system has allowed mxf_read_local_tags to have a pointer of
type pointer to MXFMetadataSet that actually points to an MXFContext.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The next pointer is kept at the end for backwards compatability until the
major bump, when it should ideally be moved at the front.
Signed-off-by: James Almer <jamrial@gmail.com>
Use the tfra timestamp if it is available and sidx timestamp is not.
Fixes reading the entire file after seeking in a live-style DASH FMP4
with an MFRA.
This specifically fixes when use_mfra_for is set.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Commit 8c8e5d5286 added a way to reduce
seek time by waiting for the windowed tcp packets instead of creating a
new socket connection. It implemented this by overwriting
s->short_seek_threshold in avio_seek(). However,
s->short_seek_threshold could already be set and be higher than the
threshold set by the protocol (i.e. s->short_seek_threshold is set in
ff_configure_buffers_for_index()).
This new feature was only enabled for tls connections in
70d8077b79. As in Ticket #9148 it reduced
performance because instead of waiting to refill the AVIOContext buffers
with an existing connections, a new HTTP request was often made instead.
Fixes Ticket #9148.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
open_url_keepalive() unsets the options when it uses them, this
includes the offsets for the Range: header. When using the HLS
tag #EXT-X-BYTERANGE along with multiple files, the range options
must be preserved after open_url_keepalive() returns EOF so that
the new file can be opened. Failure to do this results in ignoring
the #EXT-X-BYTERANGE tag and reading the wrong bytes of the file.
To fix it, reset the options before calling io_open() following
open_url_keepalive() reaching EOF
Reviewed-by: Steven Liu <liuqi05@kuaishou.com>
Fixes: left shift of negative value -352256000
Fixes: 30837/clusterfuzz-testcase-minimized-ffmpeg_dem_MVI_fuzzer-5755626262888448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 29868/clusterfuzz-testcase-minimized-ffmpeg_dem_CINE_fuzzer-5692001957445632
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also remove AV_LOG_SIMULATE from the list as it is not used directly, and do
not use panic level on unknown loglevel, but make them warn. Also fix mapping of
NOTICE/INFO/VERBOSE and add documentation about when the option should actually
be used.
Signed-off-by: Marton Balint <cus@passwd.hu>
Maximum packet size is 10000 (RIST_MAX_PACKET_SIZE, which is unfortunately
private) minus the RIST protocol overhead which is 28 bytes for the unencrypted
case, 36 for the encrypted case.
Signed-off-by: Marton Balint <cus@passwd.hu>
Queue tracking makes no difference so remove it, return EAGAIN of no data is
available and rist data block needs to be freed even for zero sized packets.
Signed-off-by: Marton Balint <cus@passwd.hu>
av_get_packet() already makes sure that the packet size is accurate
and that the packet data is zero-padded even when one could not read as
much as desired.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit adds a "gophers" handler to the gopher protocol. gophers
is a community-adopted protocol that acts the same way like normal
gopher with the added TLS encapsulation.
The gophers protocol is supported by gopher servers like geomydae(8),
and clients like curl(1), clic(1), and hurl(1).
This commit also adds compilation guards to both gopher and gophers,
since now there are two protocols in the file it makes sense to
have this addition.
Signed-off-by: parazyd <parazyd@dyne.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
AviSynth+ outputs audio in the same format as the
OS, so assuming little endian formats as input
on big endian OSes results in nothing but static.
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
avs_is_color_space provides a generic way of checking whether the
video is RGB, and has been available through AVSC_API since 2.6.
This means that GetProcAddress doesn't have to run on every frame.
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
av_stream_add_side_data() already defines size as a size_t, so this makes it
consistent across all side data functions.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: -2.21166e+304 is outside the range of representable values of type 'long'
Fixes: 29169/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5725452796821504
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Timeout (too long -> 241ms)
Fixes: 29083/clusterfuzz-testcase-minimized-ffmpeg_dem_SWF_fuzzer-6273684478230528
The source of the magic number is
A very quick simulation of the best case compression for "compress"
below is not nice written code as i did not expect I or anyone else
would ever see it again
I would have preferred some nicer expression or course, but thats
what it seems to be asymptotically. For smaller amounts of data a
tighter bound is possible but i saw no nice way to consider that
and it seems also overkill to try to do it more fine grained for
just this
main(){
int64_t bits = 0;
int bank = 256;
int bitbank = 8;
for(unsigned i = 0; i<1024*1024*1024*4U-100000;) {
int word_size = bank-255;
i += word_size;
bits += bitbank;
if (!(bank & (bank-1)))
bitbank ++;
bank++;
if (bitbank > 16) {
printf("BEST %f \n", 8.0 * i / bits );
bank = 256;
bitbank = 8;
}
}
}
above assumes i remembered correctly how the algorithm works but the
value was close to what actual compession of zeros gave
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Mobiclip related code was based on Mobius (https://github.com/adibsurani/Mobius),
which was based on my original reverse engineering efforts (https://github.com/Gericom/MobiclipDecoder).
This commit adds the appropriate copyright headers on the related files.
Signed-off-by: Florian Nouwt <fnouwt2@gmail.com>
When the deprecated option "user-agent" was set to something different
than its default value, said option would always precede and overwrite
the ordinary user_agent option (regardless of whether it was explicitly
set) which leads to a leak of the user_agent option (which has a default
value, so the leak happens always).
Fix this by setting the same destination for both options; the last
option applied wins then.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Enables writing TTML documents or encoded TTML paragraphs as such
documents.
Additionally, a test for the combined TTML encoder and muxer has
been added to validate that the components still work.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
While this usage of strncpy is correct, said function nevertheless has
the disadvantage of not automatically ensuring that the destination
string is zero-terminated. So av_strlcpy should be preferred.
This also removes a -Wstringop-truncation warning from GCC (it doesn't
matter whether the buffer is truncated, as long as it can fit all
the names of the supported codecs).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It only got added recently, and the new name makes it consistent with
product_version_num in the next patch.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 538976288 * 8 cannot be represented in type 'int'
Fixes: 26910/clusterfuzz-testcase-minimized-ffmpeg_dem_LXF_fuzzer-6634030636335104
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036854775808 + -242 cannot be represented in type 'long'
Fixes: 26910/clusterfuzz-testcase-minimized-ffmpeg_dem_MCC_fuzzer-6723018395090944
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: OOM
Fixes: 28348/clusterfuzz-testcase-minimized-ffmpeg_dem_MSP_fuzzer-4612055872831488
Fixes: 28360/clusterfuzz-testcase-minimized-ffmpeg_dem_MSP_fuzzer-6245230626078720
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Infinite loop
Fixes: 30874/clusterfuzz-testcase-minimized-ffmpeg_dem_AIFF_fuzzer-5933710488764416
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -1300248894420254720 * 16 cannot be represented in type 'long'
Fixes: 30879/clusterfuzz-testcase-minimized-ffmpeg_dem_DCSTR_fuzzer-5094464215449600
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The fourccs used by the Megalux Frame format to determine the pixel
format are actually no fourccs at all as they are a single byte.
Furthermore, their range is continuous (1-5), so they are actually
ordinary indices. So treat them as such and don't use PixelFormatTags
for them.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This flag was added in 492026209b
in conjunction with av_demuxer_open() to allow to pass private
options to demuxers. It worked as follows: av_open_input_stream()
(the predecessor of avformat_open_input()) would not call the
read_header function if this flag is set. Instead the user could set
private options of the demuxer via the format's private class after
avformat_open_input() and then call av_demuxer_open() which called
the format's read_header function.
This approach was abandoned in e37f161e66
and av_demuxer_open() deprecated; instead the AVDictionary based way of
passing private options to the demuxer was choosen. Yet
AVFMT_FLAG_PRIV_OPT has never been deprecated and av_demuxer_open()
never removed. This commit implements the deprecation of the flag and
schedules av_demuxer_open for removal on the next major bump.
Given that av_demuxer_open() has been deprecated in 2012 and that this
flag is useless without it, the flag will be ignored after the next
major version bump.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
strncpy only ensures that one does not write beyond the end of the
destination buffer; in case of truncation it does not zero-terminate
the destination buffer. This makes using it the way it is now in the
DASH demuxer dangerous. So use av_strlcpy instead.
Also don't write anything if there is no id: The buffer has already been
zeroed initially.
The DASH testset from the Universität Klagenfurt contains samples with
ids that are too long. E.g.
http://ftp.itec.aau.at/datasets/DASHDataset2014/TearsOfSteel/1sec/TearsOfSteel_1s_simple_2014_05_09.mpd
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Needs a CountedElement in order to distinguish the case of the element
not being present and the element being present with a value of zero.
(It has been argued by Ridley Combs that one should only ever use the
AV_DISPOSITION_DUB field for audio tracks. Yet given that there is no
definition for the disposition flags, one can also interpret it to mean
that e.g. a subtitle track is meant to be used with the dubbed audio
track or the original audio track. This commit interprets this flag in
this sense, which also allows to maintain it on remuxing.)
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: -2147483634 - 16 cannot be represented in type 'int'
Fixes: 28322/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-5711888402612224
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -2147483648 - 4 cannot be represented in type 'int'
Fixes: 28127/clusterfuzz-testcase-minimized-ffmpeg_dem_VOC_fuzzer-4880586455646208
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also make the macro used for the demuxers spec-compliant. The earlier
macro was not, because the ... argument of a variadic macro must not be
left out. GCC and Clang warn about this when using -pedantic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Memory for auxillary_info was not freed after usage.
Leak can be reproduced with following commands:
Optionally, generate input video:
ffmpeg -f lavfi -i testsrc=duration=10:size=1280x720:rate=30 input.mp4
Run ffmpeg with valgrind:
valgrind --leak-check=full --show-leak-kinds=all \
ffmpeg -y -i input.mp4 -vcodec copy -acodec copy \
-encryption_scheme cenc-aes-ctr \
-encryption_key 00000000000000000000000000000000 \
-encryption_kid 00000000000000000000000000000000 \
ffmpeg_encrypted.mp4
For test video which has duration of 10 sec, leak is 4 Kb.
For 100 sec video, leak will be 33 Kb. Most likely,
leaked memory will grow linearly to the number of input frames.
Signed-off-by: Vadym Bezdushnyi <vadim.bezdush@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
This code was written when the allocation functions used parameters of
type unsigned. This is no longer true today and therefore we only need
to check whether the multiplication of the array's size stays within
a size_t -- and this can be offloaded to av_realloc_array.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the wav muxer used a reallocation of the form ptr =
av_realloc(ptr, size); that leaks upon error. Furthermore, if a
failed reallocation happened when writing the trailer, a segfault
would occur due to avio_write(NULL, size) because the muxer only
prints an error message upon allocation error, but does not return
the error.
Moreover setting the pointer to the buffer to NULL on error seems to
be done on purpose in order to record that an error has occured so that
outputting the peak values is no longer attempted. This behaviour has
been retained by simply disabling whether peak data should be written
if an error occurs.
Finally, the reallocation is now done once per peak block and not once
per peak block per channel; it is also done with av_fast_realloc and not
with a linear size increase.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
1582e306a4 scheduled it for removal with
libavformat major version 58, but it was never removed.
Reviewed-by: Paul B Mahol <onemda@gmail.com
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AVID streams - currently handled by the AVRN decoder - can be (depending
on extradata contents) either MJPEG or raw video. To decode the MJPEG
variant, the AVRN decoder currently instantiates a MJPEG decoder
internally and forwards decoded frames to the caller (possibly after
cropping them).
This is suboptimal, because the AVRN decoder does not forward all the
features of the internal MJPEG decoder, such as direct rendering.
Handling such forwarding in a full and generic manner would be quite
hard, so it is simpler to just handle those streams in the MJPEG decoder
directly.
The AVRN decoder, which now handles only the raw streams, can now be
marked as supporting direct rendering.
This also removes the last remaining internal use of the obsolete
decoding API.
Commit 0d1229f1d2 factored the main part
of the voc demuxer's read_packet function out; yet when this Libav
commit was merged in f99195d56f, the
dependency of the other users of this function on vocdec.o was
unnecessarily kept. This commit fixes this.
While just at it, also disable the data only used by the voc demuxer
and muxer in voc.c if both of them are disabled.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The options of the w64 demuxer are a proper subset of the options for
the wav demuxer, making it possible to reuse a part of the options for
the wav demuxer for the w64 demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The NUT and avi demuxers only need ff_codec_movvideo_tags and so this
removes a dependency on the rest of isom.c as well as on mpeg4audio.c
(which isom depends on); it is similar for the Matroska demuxer and
muxers, except that the mpeg4audio.c dependency can't be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is a result of the mov channel parsing stuff being factored out
of mov.c twice: Once in 91b782720f
to isom.c and later in 3bab7cd128.
Also remove the isom.h header; and while just at it, remove an unused
mathematics.h inclusion.
(isom.c actually depends upon mpeg4audio from libavcodec for
avpriv_mpeg4audio_get_config2 and avpriv_mpa_freq_tab; yet there is
no configure dependency for iso_media which leads to failure of shared
builds.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Neither the feature, public fields, or AVOptions were ever truly deprecated,
nor will have been removed if this FF_API_ define was left in place, so
get rid of it as it's misleading.
Signed-off-by: James Almer <jamrial@gmail.com>
The current behaviour ends up squaring the avg_frame_rate if the conter mode flag is set.
This messes up the timecode calculation, and looks to me as a regression that
seems to have been introduced 428b4aac.
Upon further testing is seems that no special case is need for having the counter flag set.
av_timecode_init appears to handles the timecode correctly, at least in the sample files
I have.
Here is a sample mov file with the counter flag set
https://www.dropbox.com/s/5l4fucb9lhq523s/timecode_counter_mode.mov
before the patch ffmpeg will report the timecode as:
00:37:11:97 and warns that the timecode framerate is 576000000/1002001
after patch:
14:50:55:02
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is the Matroska equivalent of D_WEBVTT_DESCRIPTIONS and is
therefore only enabled for subtitles.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is the equivalent of the WebM "D_WEBVTT/DESCRIPTIONS" and is
therefore only exported for subtitles.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Given that our disposition flags provide no way to distinguish the
cases of "track is unsuitable for hearing impaired users" and "it is
unknown whether the track is suitable for hearing impaired users" we do
not need to use a CountedElement for these flags.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Hint: Matroska actually provides a way to distinguish the cases of
"track is no commentary track" and "it is unknown whether the track
is a commentary track", but our disposition flags do not. Therefore
we need not use a CountedElement.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
For a very long time, the payload of integer and float elements had to
have a length > 0. Our parser treated such invalid elements as having a
value zero. But now it has been defined what an EBML element with length
zero means: It is a shorthand for the default value. This has also been
defined for strings (both ASCII and UTF-8). This commit modifies our
parser to support this.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This has been done in order to find out whether this element is present
at all; but this can now be done in a cleaner way by using a CountedElement
for it.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
According to the new EBML specifications, a string element of length
zero would be read as the default value by a compliant parser.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In the absence of an explicitly coded minimal luminance, the current
code inferred it to be -1, an invalid value. Yet it did not check the
value lateron at all, so that if a valid maximum luminance is
encountered, but no minimal luminance, an invalid minimal luminance of
-1 is exported. If an minimal luminance element with a negative value is
present, it is exported, too. This can be simply fixed by adding a check
for the value of the element.
Yet given that a minimal luminance of zero Cd/m² is legal and can be
coded with a length of zero, we must not use a fake default value to
find out whether the element is present or not. Therefore this patch
uses an explicit counter for it.
While just at it, also check for max_luminance > min_luminance.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the generic EBML reader used by the Matroska demuxer did
not have the capability to record whether an element was actually
present or not; instead, in cases where it mattered one typically added
an invalid default value and checked whether the value is valid (in
which case it is guaranteed to be present). This worked pretty well so
far, yet the EBML specifications have evolved: It is now legal to use
zero-length elements for floats, ints, uints and strings (both ASCII and
UTF-8); the value of these elements is the default value of the element
(if it has one) or zero for scalar types and an empty string for
strings. Furthermore, having a default value does no longer imply that
the element may be presumed to be present (with its default value) if it
is absent; this is only true if the element is mandatory, too.
These rules are designed to allow size savings as follows: Consider the
newly added FlagOriginal: It being zero means the track is not in its
original language, it being one means it is. For backward compatibility
reasons, neither of the two values may be inferred automatically in the
absence of the element. But one can still save a byte when one wants to
write the element with a value of zero, as one can write the integer with
a length of zero: 0x55AE 80 instead of 0x55AE 81 00. In the former case,
a parser has to infer the value of the element to be zero (which is the
element's default value).
When encountering an element with length zero, our parser always infers
a value of zero (or an empty string); this is wrong for values with
a different default value. It needs to infer the default value (or zero
in its absence) and this precludes using an invalid default value for
elements like FlagOriginal. Ergo one needs to be able to record whether
an element is present or not by other means. This patch allows to use a
simple counter for this. While just at it, some invalid and unnecessary
default values have been removed (mastering metadata elements used
default values of -1.0, despite these elements only being used if they
are > 0).
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 7 - -2147483647 cannot be represented in type 'int'
Fixes: 28036/clusterfuzz-testcase-minimized-ffmpeg_dem_MICRODVD_fuzzer-5171698751766528
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The MPEG-PS muxer uses a custom queue of custom packets. To keep track
of it, it has a pointer (named predecode_packet) to the head of the
queue and a pointer to where the next packet is to be added (it points
to the next-pointer of the last element of the queue); furthermore,
there is also a pointer that points into the queue (called premux_packet).
The exact behaviour was as follows: If premux_packet was NULL when a
packet is received, it is taken to mean that the old queue is empty and
a new queue is started. premux_packet will point to the head of said
queue and the next_packet-pointer points to its next pointer. If
predecode_packet is NULL, it will also made to point to the newly
allocated element.
But if premux_packet is NULL and predecode_packet is not, then there
will be two queues with head elements premux_packet and
predecode_packet. Yet only elements reachable from predecode_packet are
ever freed, so the premux_packet queue leaks.
Worse yet, when the predecode_packet queue will be eventually exhausted,
predecode_packet will be made to point into the other queue and when
predecode_packet will be freed, the next pointer of the preceding
element of the queue will still point to the element just freed. This
element might very well be still reachable from premux_packet which
leads to use-after-frees lateron. This happened in the tickets mentioned
below.
Fix this by never creating two queues in the first place by checking for
predecode_packet to know whether the queue is empty. If premux_packet is
NULL, then it is set to the newly allocated element of the queue.
Fixes tickets #6887, #8188 and #8266.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Normally, video packets are muxed before audio packets for mxf (there is
a dedicated interleave function for this); furthermore the first (video)
packet triggers writing the actual header. Yet when the first video packet
fails the checks performed on it, it will be an audio packet that leads
to writing the header and codec_ul (a value set based upon
properties of the bitstream which necessitates actually inspecting
packets) may be wrong. Therefore this commit discards audio packets until
a valid video packet has been received.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mxf distinguishes codec profiles by different UIDs and therefore needs
to check that the input is actually compatible with mxf (i.e. if there
is a defined UID for it). If not, then sometimes the UID would be set to
NULL and writing the (video) packet would fail. Yet the following audio
packet would trigger writing the header (which has been postponed because
the UID is not known at the start) and if the UID is NULL, this can lead
to segfaults. This commit therefore stops setting the UID to NULL if the
input is incompatible with mxf (it has initially been set to a generic
value in mxf_write_header()).
Fixes#7993.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 2147483647 + 64 cannot be represented in type 'int'
Fixes: 30333/clusterfuzz-testcase-minimized-ffmpeg_dem_RM_fuzzer-5175286983426048
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Such a scenario is undefined behaviour and would also indicate a bug
in our code.
Suggested-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is undefined behaviour in C, so use data = len ? data + len : data
instead of data += len. GCC optimizes the branch away in this case;
Clang unfortunately doesn't.
Fixes ticket #8592.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It has been added in 6db42a2b6b,
yet since then none of the necessary create/free_device_capabilities
functions has been implemented, making this API completely useless.
Because of this one can already simplify
avdevice_capabilities_free/create and can already remove the function
pointers at the next major bump; given that the documentation explicitly
states that av_device_capabilities is not to be used by a user, it's
options can already be removed (save for the sentinel).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The choosen value is arbitrary. I am not sure if this is a good idea
but i dont immedeately see an alternative better way, it seems either
an arbitrary limit or OOM
Fixes: OOM
Fixes: 27492/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6194970578649088
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
And make it const, so the caller doesn't attempt to change it.
ff_get_muxer_ts_offset() should be used to get the muxer timestamp offset.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: Infinite loop
Fixes: 30165/clusterfuzz-testcase-minimized-ffmpeg_dem_EA_fuzzer-6224642371092480
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
