Get rid of pr dependency and write the columns strictly
alphabetical without page size considerations (POSIX
specifies 66 lines as default).
Setting the page size via pr's -l option was considered,
but as there is issue #5680 which wants to avoid pr
mainly because it's not in busybox, we chose to replace
pr instead.
Before pr would attempt to write pages, thus if a page
boundary was reached, the output looked confusing as one
couldn't see there was a new page and the alphabetical
order was disrupted when scanning down one of the columns.
This change is based on a shell implementation submitted
before by Yejun.
Possible differences to the current version using pr:
1. pr implementations should truncate items to not overflow columns;
depending on how it's done not truncating shall be better IMHO.
2. pr implementations might balance columns differently;
we use minimum number of lines and might end up not
using all columns or might have lesser entries in the
last column(s)
3. we use spaces only for padding the columns; at least the GNU pr
version on my system also by default stuffs in tabs in addition
to a single space in between columns. I don't see that this
behaviour is demanded by POSIX, though I might be very well
overlooking things. Anyway for our use case I can't see a need
for having the additional tabs, or why it would be better compared
to padding with spaces only.
Fixes output for sizes with width < column width, too.
Fixes remaining part of ticket #5680
Contributor: Guo, Yejun <yejun.guo@intel.com>
This patch is based on https://trac.ffmpeg.org/ticket/5680 provided by
Kylie McClain <somasis@exherbo.org> at Wed, 29 Jun 2016 16:37:20 -0400,
and have some changes.
contributor: Kylie McClain <somasis@exherbo.org>
contributor: avih <avihpit@yahoo.com>
Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Adding the support to build FFMPEG with HW accelerated decode and encode on PPC64
little endian architecture.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
* commit 'c0bd865ad60da31282c5d8e1000c98366249c31e':
configure: Add -D_POSIX_C_SOURCE=200112 -D_XOPEN_SOURCE=600 for mingw as well
Merged-by: James Almer <jamrial@gmail.com>
Mingw headers have got header inline implementations of localtime_r
and gmtime_r, but only visible if certain posix thread safe functions
have been requested.
This is a preparatory step for improving the detection of those
functions.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currectly just standard header path can be found,
check_type/struct will fail if vaapi is installed somewhere else.
Move them followed "check_pkg_config"
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Bump the minimum required version to the first one with the logger API callback.
Reviewed-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
libvpx can be compiled with the VP8 decoder and encoder disabled, and
there's no reason to force their presence if the user only wants VP9.
Signed-off-by: James Almer <jamrial@gmail.com>
autorotate is enabled by default in ffmpeg so the rotation filters
are required and will be attempted for insertion without the user's
knowledge if an input stream has rotation side-data.
With all of our existing users of cuda_sdk switched over to ffnvcodec,
we could remove cuda_sdk completely and say that we should no longer
add code that requires the full sdk, and rather insist that such code
only use ffnvcodec.
As discussed previously, the use of nvcc from the sdk is still
supported with a distinct option.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This change switches the vf_thumbnail_cuda filter from using the
full cuda sdk to using the ffnvcodec headers and loader.
Most of the change is a direct mapping, but I also switched from
using texture references to using texture objects. This is supposed
to be the preferred way of using textures, and the texture object API
is the one I added to ffnvcodec.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This change switches the vf_scale_cuda filter from using the
full cuda sdk to using the ffnvcodec headers and loader.
Most of the change is a direct mapping, but I also switched from
using texture references to using texture objects. This is supposed
to be the preferred way of using textures, and the texture object API
is the one I added to ffnvcodec.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This change switches the vf_thumbnail_cuda filter from using the
full cuda sdk to using the ffnvcodec headers and loader.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
The use of nvcc to compile cuda kernels is distinct from the use of
cuda sdk libraries and linking against those libraries. We have
previously not bothered to distinguish these two cases because all
the filters that used cuda kernels also used the sdk. In the following
changes, I'm going to remove the sdk dependency from those filters,
but we need a way to ensure that nvcc is present and functioning, and
also a way to explicitly disable its use so that the filters are not
built.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
If we enable a component but a dependant library is disabled, then the enabled
component gets silently disabled. Warning about disabled explicitly enabled components
allows configure to show the missing dependencies and if --fatal-warnings is
used it can also fail if the user wants it so.
For example if libdav1d is not availble ./configure --enable-decoder=libdav1d
succeeds but the libdav1d decoder is not be enabled. After the patch configure
will warn about this:
WARNING: Disabled libdav1d_decoder because not all dependencies are satisfied: libdav1d
Signed-off-by: Marton Balint <cus@passwd.hu>
* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
DXVA2 may be enabled even when every relevant module is disabled,
which would result in the dependency generator not including its
extralibs to avcodec.
Fixes ticket #7642.
Signed-off-by: James Almer <jamrial@gmail.com>
The color fields were moved to another struct, and a way to propagate
timestamps and other input metadata was introduced, so the packet
fifo can be removed.
Add support for 12bit streams, an option to disable film grain, and
read the profile from the sequence header referenced by the ouput
picture instead of guessing based on output pix_fmt.
Signed-off-by: James Almer <jamrial@gmail.com>
Also add SIMD which works on lines because it is faster then calculating it on
8x8 blocks using pixelutils.
Signed-off-by: Marton Balint <cus@passwd.hu>
This is a cuda implementation of yadif, which gives us a way to
do deinterlacing when using the nvdec hwaccel. In that scenario
we don't have access to the nvidia deinterlacer.
Simple parser to set keyframes, frame type, structure, width, height, and pixel
format, plus stream profile and level.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>
Also bump the API version requirement to 10.9.5, because on olders versions
there were some reports of crashes using the undocumented, yet available
BMDDeckLinkDeviceHandle.
Signed-off-by: Marton Balint <cus@passwd.hu>
Set the minimum version to 0.35.0 (libva 1.3.0) and remove redundant
configure tests. This also allows the proprietary libmfx fork of libva,
which always shows the version number 0.99.0 (independent of the actual
version).
Hook in libklvanc and use it for output of EIA-708 captions over
SDI. The bulk of this patch is just general support for ancillary
data for the Decklink SDI module - the real work for construction
of the EIA-708 CDP and VANC line construction is done by libklvanc.
Libklvanc can be found at: https://github.com/stoth68000/libklvanc
Updated to reflect feedback from Marton Balint <cus@passwd.hu>,
Carl Eugen Hoyos <ceffmpeg@gmail.com>, Aaron Levinson
<alevinsn_dev@levland.net>, and Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '39f3b6f3fc2b46b405b680cce3599f1b370e342d':
configure: Move add_fooflags() helper functions into canonical order
Merged-by: James Almer <jamrial@gmail.com>
* commit '5691c746cf62e69806aae1baf0a6e8252d519444':
configure: Group toolchain parameter mangling functions together
Merged-by: James Almer <jamrial@gmail.com>
* commit '25c2a27c9ec0150210d75ee5ac8ed1bfa14c1a56':
configure: Make require_cc() and require_cpp_condition() functions consistent
Merged-by: James Almer <jamrial@gmail.com>
Also make sure we set the URL context max packet size accordingly.
Based on a patch by Tudor Suciu <tudor.suciu@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
- Allow to add deps in any order rather than "in linking order".
- Expand deps chains as required rather than just once.
- Validate that there are no cycles.
- Validate that [after expansion] deps are limited to other fflibs.
- Remove expectation for a specific output order of unique().
Previously when adding items to <fflib>_deps, developers were
required to add them in linking order. This can be awkward and
bug-prone, especially when a list is not empty, e.g. when adding
conditional deps.
It also implicitly expected unique() to keep the last instance of
recurring items such that these lists maintain their linking order
after removing duplicate items.
This patch mainly allows to add deps in any order by keeping just
one master list in linking order, and then reordering all the
<fflib>_deps lists to align with the master list order.
This master list is LIBRARY_LIST itself, where otherwise its order
doesn't matter.
The patch also removes a limit where these deps lists were expanded
only once. This could have resulted in incomplete expanded lists,
or forcing devs to add already-deducable deps to avoid this issue.
Note: it is possible to deduce the master list order automatically
from the deps lists, but in this case it's probably not worth the
added complexity, even if minor. Maintaining one list should be OK.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
x4 - x25 faster.
check_deps() recursively enables/disables components, and its loop is
iterated nearly 6000 times. It's particularly slow in bash - currently
consuming more than 50% of configure runtime, and about 20% with other
shells.
This commit applies few local optimizations, most effective first:
- Use $1 $2 ... instead of pushvar/popvar, and same at enable_deep*
- Abort early in one notable case - empty deps, to avoid costly no-op.
- Smaller changes which do add up:
- Handle ${cfg}_checking locally instead of via enable[d]/disable
- ${cfg}_checking: test done before inprogress - x2 faster in 50%+
- one eval instead of several at the empty-deps early abort path.
- The "actual work" part is unmodified - just its surroundings.
Biggest speedups (relative and absolute) are observed with bash.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Tested-by: Helmut K. C. Tessarek <tessarek@evermeet.cx>
Tested-by: Dave Yeo <daveryeo@telus.net>
Tested-by: Reino Wijnsma <rwijnsma@xs4all.nl>
Signed-off-by: James Almer <jamrial@gmail.com>
