* commit '93afb6c98df876b15e3d911a9450ad55f92080ce':
avconv: set output avg_frame_rate when known
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6072184e702b4b631ac72f1b66b75e5f21e0ce2d':
asfenc: use codec descriptors instead of AVCodecs to write codec info
Conflicts:
tests/ref/lavf/asf
tests/ref/seek/lavf-asf
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also, stop using AVCodecContext.codec_name as fallback, since it will be
deprecated.
Changes the result of the lavf-asf test (and its associated seektest),
since 'msmpeg4v3' gets written instead of just 'msmpeg4'.
Partially undoes commit 2c4e08d893:
riff: always generate a proper WAVEFORMATEX structure in
ff_put_wav_header
A new flag, FF_PUT_WAV_HEADER_FORCE_WAVEFORMATEX, is added to force the
use of WAVEFORMATEX rather than PCMWAVEFORMAT even for PCM codecs.
This flag is used in the Matroska muxer (the cause of the original
change) and in the ASF muxer, because the specifications for
these formats indicate explicitly that WAVEFORMATEX should be used.
Muxers for other formats will return to the original behavior of writing
PCMWAVEFORMAT when writing a header for raw PCM.
In particular, this causes raw PCM in WAV to generate the canonical
44-byte header expected by some tools.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rational for this is another issue that plex has exposed. When it is
conducting a transcode of video to HLS for streaming, my father noticed
artifacts when played on his GoogleTV (NSZ-GT1). He sent me a test file
and I reproduced it on my device of the same model. It is important to
note that the artifacts were not present when streaming to VLC or QuickTime
Player. I copied the command-line that plex used, and conducted all of the
following tests using FFmpeg git.
Transcode to HLS: artifacts on playback
Transcode to TS: playback is fine
Cat HLS segments into a single TS: playback is fine
Segment single TS file to segments: artifacts on playback
Segment single TS file to segments using Apple's HLS segmenter: playback is
fine
At this point I carefully examined the differences between Apple's HLS
segmenter output and FFmpeg's. Among the considerable differences, I
noticed that the video PES packets always had a 0 length. So I continued:
Transcode to HLS using FFmpeg with 0 length PES packets: playback is fine.
Segment single TS to segments with 0 length PES packets: playback is fine.
All failures mentioned are only on the GTV since it is the only player on
which I could reproduce artifacts. I only tested the GTV, VLC, and
QuickTime Player though, so my test case is limited. I do not know if
other players exhibit this issue.
Since it was useful last time, I have uploaded the test file as
hls_pes_packet_length.m4v along with its associated txt file which contains
the transcode command-line that was used.
Reviewed-by: Kieran Kunhya <kierank@obe.tv>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This causes us to favor RGB8 over PAL8 when FF_LOSS_COLORQUANT is used
It probably makes sense to reinvestigate the exact scoring of pal8 when
our pal8 support improves to be supperior to rgb8
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Improves compatibility with XDCAM HD formats. It has been set for a long time
in ffmbc.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Marton Balint <cus@passwd.hu>
Improves rgb -> gray16 conversion
Fixes Ticket3422
The pam and png output files look visually similar, in both cases the
dynamics increase to 0x0 -> 0xfffb.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f1eac2b8a0370b908cd691086d11f51342054730':
movenc: Use keyframes as default fragmentation point in ismv
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Use it only on subtitle CuePoints.
With proper demuxer/splitter support this should improve the display
of subtitles right after seeking to a given point in the stream.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Files won't validate with mkvalidtor if these two elements are missing.
Use a const "Lavf" string that wont change with library version bumps.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The muxer has been creating files with v4 elements for some time now,
and especially now that we can mux non-experimental Opus files, reporting
the DocTypeVersion as 2 is not correct.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The element was only being written when the value == 1. But the default
value of this element is 1, so this has no useful effect. This element
needs to be written when the value == 0.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The bug it was working seems to have been fixed.
This change causes ffmpeg to use the trim filter to implement
the -t option.
FATE tests are updated due to the more accurate handling of
the last packets.
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by ffmpeg state
that they are 'piff' compatible via 'ftyp' box, this needs to be corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This makes -t sample-accurate for audio and will allow further
simplication in the future.
Most of the FATE changes are due to audio now being sample accurate. In
some cases a video frame was incorrectly passed with the old code, while
its was over the limit.
Most formats do not support negative timestamps, shift them to avoid
unexpected behaviour and a number of bad crashes.
CC:libav-stable@libav.org
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
To define accurately the delay between two frames, it is necessary to
have both available. Before this commit, the first frame had a delay of
0; while in practice the problem is not visible in most situation, it is
problematic with low frame rate and large scene change.
This commit notably fixes output generated with commands such as:
ffmpeg -i big_buck_bunny_1080p_h264.mov
-vf "select='gt(scene,0.4)',scale=320:-1,setpts=N/TB"
-frames:v 5 -y out.gif
Also, to avoid odd loop delays, the N-1 delay is duplicated for the last
frame.
This commit removes the badly duplicated code between the encoder and
the muxer. That may sound surprising, but the encoder is now responsible
from the encoding of the picture when muxing to a .gif file. It also
does not require anymore a manual user intervention such as a -pix_fmt
rgb24 to work properly. To summarize, output gif are now easier to
generate, code is saner and simpler, and files are smaller (thanks to
the lzw encoding which was unused so far with the default .gif output).
We can certainly make things even better, but this is the first step.
FATE is updated because of the output being produced by the encoder and
not the muxer (no lzw in the muxer), and in the seek test only the size
mismatches.
Fixes Ticket #2262
Other software does not store it in this case, and the information
is provided by the codec stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
We have to make some symetric changes elsewhere as this increases
the precission with which samples are stored.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
After making some blind tests on a small collection of music
samples for home usage. It turned out that the default cutoff
was too low.
The impact of filter_size was not clearly distinguishable (the
results were on the edge) with the music samples but turned out
to be clearly audible in some synthetic samples.
Thanks to Daniel for helping out with the listening tests.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
It is broken, and results will be messed up when seeking.
This also fix duration displayed for streams when using -c copy.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Without this exception files with ".gif" extension by default
recognized as input suitable for image2 demuxer rather than gif.
In order to pass image through gif demuxer it was necessary
to use -f gif option.
This change affected 'make fate' test results because previously
image2 demuxer and gif decoder took only first frame of multiframe
test data, which is no longer true with gif demuxer.
Signed-off-by: Vitaliy E Sugrobov <vsugrob@hotmail.com>
Currently FFM files generated with one versions of ffmpeg generally
cannot be read by another.
By spliting data into chunks, more fields can saftely be appended to
chunks as well as new chunks added.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes playback in some circumstances (like webm in firefox).
Regression after 2c34367b.
It is also matching the Matroska specifications:
http://matroska.org/technical/specs/notes.html, "The quick eye will
notice that if a Cluster's Timecode is set to zero, it is possible to
have Blocks with a negative Raw Timecode. Blocks with a negative Raw
Timecode are not valid."
* qatar/master:
wmaenc: use float planar sample format
(e)ac3enc: use planar sample format
aacenc: use planar sample format
adpcmenc: use planar sample format for adpcm_ima_wav and adpcm_ima_qt
adpcmenc: move 'ch' variable to higher scope
adpcmenc: fix 3 instances of variable shadowing
adpcm_ima_wav: simplify encoding
libvorbis: use planar sample format
libmp3lame: use planar sample formats
vorbisenc: use float planar sample format
ffm: do not write or read the audio sample format
parseutils: fix parsing of invalid alpha values
doc/RELEASE_NOTES: update for the 9 release.
smoothstreamingenc: Add a more verbose error message
smoothstreamingenc: Ignore the return value from mkdir
smoothstreamingenc: Try writing a manifest when opening the muxer
smoothstreamingenc: Move the output_chunk_list and write_manifest functions up
smoothstreamingenc: Properly return errors from ism_flush to the caller
smoothstreamingenc: Check the output UrlContext before accessing it
Conflicts:
doc/RELEASE_NOTES
libavcodec/aacenc.c
libavcodec/ac3enc_template.c
libavcodec/wmaenc.c
tests/ref/lavf/ffm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The timebases before where only guranteed to be 1/fps precisse
and could cause AV sync errors on low fps
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
While a 25 fps stream can in general store frame durations in 1/25
units, this is not true for the timestamps. For example a 25fps
and a 25000/1001 fps stream when they are stored together might have
a matching 0 timestamp point but when for example a chapter from
this is cut the new start is no longer aligned. The issue gets
MUCH worse when the streams are lower fps, like 1 or 2 fps.
This commit thus makes the muxer choose a multiple of the
framerate as timebase that is at least about 20 micro seconds precise
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
With this, when we use a finer timebase than neccessary to store
durations the demuxer still knows what the original timebase was.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also factorize the common options for the different mov-based tests.
Since the header is now on top in the last generated file, the data
offset in the seek test needed some updates as well.
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
Rewrite 10 bit dpx decoder to decode into GBRP10 color space
instead of converting to RGB48.
Add 12 bit decoder to decode into GBRP12 color space.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Fixes Ticket1627
The fate change is due to ffmpeg no longer pushing audio timestamps
aggressively up (which is what caused the AV sync issues in the ticket)
but leaving them as they are.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add credit/copyright to librtmp authors for parts of the RTMPE code
rtmp: Move the CONFIG_ condition into the if conditions
aac: Mention abbreviation as well in long_name
build: Skip compiling rtmpdh.h if ffrtmpcrypt protocol is not enabled
doc: Add Git configuration section
configure: Add a dependency on https for rtmpts
rtp: Only choose static payload types if the sample rate and channels are right
Conflicts:
doc/git-howto.texi
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This commit is based on libav's implementation and
makes sure to compare output timestamps together.
It also reduces the differences with avconv.
The changes to the test reference files are caused
by an additional packet at the end, the timestamp
of the frame encoded by this packet is always
strictly below the limit stated by the -t option.
