Don't use a LUT to negate followed by a conditional ordinary
negation immediately thereafter. Instead fold the two.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is beneficial for performance: When concatenating
the file from the vsynth1-h261 fate-test 100 times,
performance (measured by timing the codec's decode callback)
improved by 9.6%.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
h261_resync() can be completely removed, because
h261_decode_gob_header() checks for a GOB header itself if
gob_start_code_skipped is zero.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
last_resync_gb is never initialized, causing NULL + 0
in align_get_bits(). In addition to that, the loop is never
entered.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MB_TYPE_L[01] is based upon H.264 terminology (it stands for
list); yet the mpegvideo based decoders don't have lists
of reference frames, they have at most one forward and one
backward reference. So use terminology based upon this.
This also has a second advantage: MB_TYPE_L[01] is actually
an OR of two flags (which are set independently for H.264,
but aren't for mpegvideo). Switching to different flags
makes the flags fit into an int16_t, which will be useful
in future commits.
The only downside to this is a very small amount of code
in error_resilience.c and mpegutils.c (the only code shared
between the H.264 decoder and mpegvideo).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The "invalid mtype index" here is always -1, because that is
the value the VLC api uses for not existent leafs in an incomplete tree.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that MB_TYPE_CBP and MB_TYPE_QUANT
fit into an int16_t; only MB_TYPE_H261_FIL needs to
be remapped to MB_TYPE_CODEC_SPECIFIC.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, an initialized MpegEncContext had an array of
MPVPictures (way more than were ever needed) and the MPVPicture*
contained in the MPVWorkPictures as well as the input_picture
and reordered_input_picture arrays (for the encoder) pointed
into this array. Several of the pointers could point to the
same slot and because there was no reference counting involved,
one had to check for aliasing before unreferencing.
Furthermore, given that these pointers were not ownership pointers
the pointers were often simply reset without unreferencing
the slot (happened e.g. for the RV30 and RV40 decoders) or
there were moved without resetting the src pointer (happened
for the encoders where the entries in the input_picture
and reordered_input_picture arrays were not reset).
Instead actually releasing these pictures was performed by looping
over the whole array and checking which one of the entries needed
to be kept. Given that the array had way too many slots (36),
this meant that more than 30 MPVPictures have been unnecessarily
unreferenced in every ff_mpv_frame_start(); something similar
happened for the encoder.
This commit changes this by making the MPVPictures refcounted
via the RefStruct API. The MPVPictures itself are part of a pool
so that this does not entail constant allocations; instead,
the amount of allocations actually goes down, because the
earlier code used such a large array of MPVPictures (36 entries) and
allocated an AVFrame for every one of these on every
ff_mpv_common_init(). In fact, the pool is only freed when closing
the codec, so that reinitializations don't lead to new allocations
(this avoids having to sync the pool in update_thread_context).
Making MPVPictures refcounted also has another key benefit:
It makes it possible to directly share them across threads
(when using frame-threaded decoding), eliminating ugly code
with underlying av_frame_ref()'s; sharing these pictures
can't fail any more.
The pool is allocated in ff_mpv_decode_init() for decoders,
which therefore can fail now. This and the fact that the pool
is not unreferenced in ff_mpv_common_end() also necessitated
to mark several mpegvideo-decoders with the FF_CODEC_CAP_INIT_CLEANUP
flag.
*: This also means that there is no good reason any more for
ff_mpv_common_frame_size_change() to exist.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently identical to the H.261 and H.263 close functions
(which it replaces). It will be extended in future commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are two types of MPVPictures: Three (cur_pic, last_pic, next_pic)
that are directly part of MpegEncContext and an array of MPVPictures
that are separately allocated and are mostly accessed via pointers
(cur|last|next)_pic_ptr; they are also used to store AVFrames in the
encoder (necessary due to B-frames). As the name implies, each of the
former is directly associated with one of the _ptr pointers:
They actually share the same underlying buffers, but the ones
that are part of the context can have their data pointers offset
and their linesize doubled for field pictures.
Up until now, each of these had their own references; in particular,
there was an underlying av_frame_ref() to sync cur_pic and cur_pic_ptr
etc. This is wasteful.
This commit changes this relationship: cur_pic, last_pic and next_pic
now become MPVWorkPictures; this structure does not have an AVFrame
at all any more, but only the cached values of data and linesize.
It also contains a pointer to the corresponding MPVPicture, establishing
a more natural relationsship between the two.
This already means that creating the context-pictures from the pointers
can no longer fail.
What has not been changed is the fact that the MPVPicture* pointers
are not ownership pointers and that the MPVPictures are part of an
array of MPVPictures that is owned by a single AVCodecContext.
Doing so will be done in a latter commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically, add const to the pointed-to-type of pointers
that point to something static or that belong to last_pic
or next_pic (because modifying these might lead to data races).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
current_picture->cur_pic, last_picture->last_pic, similarly
for new_picture and next_picture.
Also rename the corresponding *_ptr fields.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Of all these VLCs here, only VLC.table was really used
after init, so use the ff_vlc_init_tables API
to get rid of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are generally set in ff_mpv_init_context_frame()
(mostly called by ff_mpv_common_init()); setting them
somewhere else should be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
(The return value doesn't really matter: For video decoders
every return value >= 0 is treated as "consumed all of the input".)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There is no need to parse the header twice; doing so does nothing.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These flags will be overwritten later in ff_mpv_frame_start().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has currently not been done for H263, H263P and MPEG4.
Doing so avoids having to initialize the IDCT permutation
lateron when decoding packets in order to be able to parse
a quant matrix; it means that every mpegvideo decoder always
has an initialized IDCTDSPContext after init.
Initializing is done generically in ff_mpv_decode_init().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Therefore use a proper prefix for this API, e.g.
ff_init_vlc_sparse -> ff_vlc_init_sparse
ff_free_vlc -> ff_vlc_free
INIT_VLC_LE -> VLC_INIT_LE
INIT_VLC_USE_NEW_STATIC -> VLC_INIT_USE_STATIC
(The ancient INIT_VLC_USE_STATIC has been removed
in 595324e143, so that
the NEW has been dropped.)
Finally, reorder the flags and change their values
accordingly.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Frame counters can overflow relatively easily (INT_MAX number of frames is
slightly more than 1 year for 60 fps content), so make sure we use 64 bit
values for them.
Also deprecate the old 32 bit frame_number attribute.
Signed-off-by: Marton Balint <cus@passwd.hu>
block_index is write-only for the H.261 decoder, so
don't update it by calling ff_update_block_index().
Instead use a function of our own to set/update dest.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoder-only, as the dimensions are set by the user when encoding.
Also fixup the other headers a bit while removing unnecessary internal.h
inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible for most of the callers, because e.g. only
the MPEG-4 decoder can have bits_per_raw_sample > 8.
Also most mpegvideo-based codecs are 420 only.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVFrame *frame = data;" line
for non-subtitle decoders.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Before 998c9f15d1, initializing an
MpegEncContext's IDCT parts occured in ff_mpv_common_init() and this
has been called in h261_decode_frame(), not h261_decode_init().
Yet said commit factored this out of ff_mpv_common_init() and therefore
there is no reason any more not to set this during init as this commit
does.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This mostly reverts commit 4b2863ff01.
Said commit removed the freeing code from ff_mpv_common_init(),
ff_mpv_common_frame_size_change() and ff_mpeg_framesize_alloc() and
instead added the FF_CODEC_CAP_INIT_CLEANUP to several codecs that use
ff_mpv_common_init(). This introduced several bugs:
a) Several decoders using ff_mpv_common_init() in their init function were
forgotten: This affected FLV, Intel H.263, RealVideo 3.0 and V4.0 as well as
VC-1/WMV3.
b) ff_mpv_common_init() is not only called from the init function of
codecs, it is also called from AVCodec.decode functions. If an error
happens after an allocation has succeeded, it can lead to memleaks;
furthermore, it is now possible for the MpegEncContext to be marked as
initialized even when ff_mpv_common_init() returns an error and this can
lead to segfaults because decoders that call ff_mpv_common_init() when
decoding a frame can mistakenly think that the MpegEncContext has been
properly initialized. This can e.g. happen with H.261 or MPEG-4.
c) Removing code for freeing from ff_mpeg_framesize_alloc() (which can't
be called from any init function) can lead to segfaults because the
check for whether it needs to allocate consists of checking whether the
first of the buffers allocated there has been allocated. This part has
already been fixed in 76cea1d2ce.
d) ff_mpv_common_frame_size_change() can also not be reached from any
AVCodec.init function; yet the changes can e.g. lead to segfaults with
decoders using ff_h263_decode_frame() upon allocation failure, because
the MpegEncContext will upon return be flagged as both initialized and
not in need of reinitialization (granted, the fact that
ff_h263_decode_frame() clears context_reinit before the context has been
reinited is a bug in itself). With the earlier version, the context
would be cleaned upon failure and it would be attempted to initialize
the context again in the next call to ff_h263_decode_frame().
While a) could be fixed by adding the missing FF_CODEC_CAP_INIT_CLEANUP,
keeping the current approach would entail adding cleanup code to several
other places because of b). Therefore ff_mpv_common_init() is again made
to clean up after itself; the changes to the wmv2 decoder and the SVQ1
encoder have not been reverted: The former fixed a memleak, the latter
allowed to remove cleanup code.
Fixes: double free
Fixes: ff_free_picture_tables.mp4
Fixes: ff_mpeg_update_thread_context.mp4
Fixes: decode_colskip.mp4
Fixes: memset.mp4
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The H.261 decoder doesn't use the ParseContext of its
MpegEncContext since e731697665.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The VLC for the macroblock address increment uses nine bits;
yet there is no code with this length: All codes are either shorter or
longer. So one can make the table smaller without changing the amount of
codes that need more than one round of parsing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The H.261 decoder only uses an RLTable's VLC table, yet it also
initializes its index_run, max_level and max_run. This commit stops
doing so; it will also simplify making this decoder init-threadsafe,
as the H.261 decoder and encoder now initialize disjoint parts of their
common RLTable.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The H.261 decoder uses only the very first VLC of ff_h261_rl_tcoeff,
so only initialize this one. Saves 68448B from the .bss segment; in case
the decoder is actually used, this amount of memory is saved.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
These two are always called directly after each other (with the
exception of the calls in mpeg_decode_init() where some irrelevant
modifications of the avctx (which could just as well be done before
ff_mpv_decode_defaults(), because it doesn't have a pointer to the
AVCodecContext at all and therefore can't see these modifications at
all) are performed in between), so merge ff_mpv_decode_defaults() in
ff_mpv_decode_init().
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
