After this change we always parse the full specifier even if we know the result
in the middle of the parsing. Sligtly slower, but this is needed to
consistently reject incorrect specifiers in both matching and non-matching
cases.
Signed-off-by: Marton Balint <cus@passwd.hu>
This reworks the code to be more strict about accepting stream specifiers. From
now on we strictly enforce the syntax in the documentation up until the
decisive part of the stream specifier. Therefore matching stream specifiers
always need to be correct, non matching specifiers only need to be correct
until the decisive part.
Also recursion is changed to a simple loop.
Signed-off-by: Marton Balint <cus@passwd.hu>
This removes lots of code duplication and also allows more complex specifiers,
for example you can use p:204:aⓂ️language:eng to select the English language
audio stream from program 204.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 7738135736989908991 - -7954308516317364223 cannot be represented in type 'long'
Fixes: find_stream_info_usan
Reported-by: Thomas Guilbert <tguilbert@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This avoids surprising developers. Its bad to surprise developers with
such unexpected things.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We check for the documented explanation of the "Ignore code" in extract_extradata_check() already
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Because it will be used by avformat/segment.c or other module which
need to automatically create sub-directories operation.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This utility function creates 64-bit NTP time format as per the RFC
5905.
A simple explaination of 64-bit NTP time format is here
http://www.beaglesoft.com/Manual/page53.htm
These fields will allow the mpegts demuxer to expose details about
the PMT/program which created the AVProgram and its AVStreams.
In mpegts, a PMT which advertises streams has a version number
which can be incremented at any time. When the version changes,
the pids which correspond to each of it's streams can also change.
Since ffmpeg creates a new AVStream per pid by default, an API user
needs the ability to (a) detect when the PMT changed, and (b) tell
which AVStream were added to replace earlier streams.
This has been a long-standing issue with ffmpeg's handling of mpegts
streams with PMT changes, and I found two related patches in the wild
that attempt to solve the same problem:
The first is in MythTV's ffmpeg fork, where they added a
void (*streams_changed)(void*); to AVFormatContext and call it from
their fork of the mpegts demuxer whenever the PMT changes.
The second was proposed by XBMC in
https://ffmpeg.org/pipermail/ffmpeg-devel/2012-December/135036.html,
where they created a new AVMEDIA_TYPE_DATA stream with id=0 and
attempted to send packets to it whenever the PMT changed.
Signed-off-by: Aman Gupta <aman@tmm1.net>
For seekable mpegts streams, duration is calculated from
pts by seeking to the end of the file for a pts and subtracting
the initial pts to compute a duration.
This can be expensive in terms of added latency during
probe, especially when streaming over a network. This new
option lets you skip the duration calculation, which is useful
when you don't care about the value and want to save some overhead.
This patch is particularly useful when dealing with live mpegts
streams. Normally such streams are not seekable, so durations
are not calculated. However in my case I am dealing with a seekable
live mpegts stream (networked access to a .ts file which is still
being appended to).
Signed-off-by: Aman Gupta <aman@tmm1.net>
Similar to 4c9c4fe8b2, but for durations. This fixes#7151, where
the report duration and bitrate on a mpegts stream is wildly off
due to the dvb_teletext stream's timings.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If the parser returns full frames, then the output pointer retured by
av_parser_parse2() is guaranteed to point to data contained in the
input packet's buffer.
Create a new reference to said buffer in that case, to avoid
unnecessary data copy when queueing the packet later in the function.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: runtime error: signed integer overflow: 18133149658382192 - -9223090561878065151 cannot be represented in type 'long long'
Fixes: crbug 831552
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: crbug 829153
Reported-by: Matt Wolenetz <wolenetz@google.com>
Reviewed-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In some cases, mainly working with multiprogram mpeg-ts containers as
input, it would be handy to select sub stream of a specific program by
their metadata.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream metadata.
Examples:
p:601:m:language:hun will select all sub streams of program with id 601
where sub streams have metadata key named 'language' with value 'hun'.
p:602:m:guide will select all sub streams of program with id 602 where
sub streams have metadata key named 'guide'.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently when specifying the program id you can only decide to select
all stream of the specified program (e.g. p:103 will select all streams
of program 103) or narrow the selection to a specific stream sub index
(e.g. p:145:1 will select 2nd stream of program 145.) But you can not
specify like all audio streams of program 145 or 3rd video stream of
program 311.
In some case, mainly working with multiprogram mpeg-ts containers as
input, this feature would be handy.
This patch makes it possible to narrow the stream selection among
streams of the specified program by stream type and optionally its
index. Handled types: a, v, s, d.
Examples: p:601:a will select all audio streams of program 601,
p:603:a:1 will select 2nd audio streams of program 603,
p:604:v:0 will select first video stream of program 604.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: runtime error: signed integer overflow: 7738135736989908991 - -7898362169240453118 cannot be represented in type 'long'
Fixes: Chromium bug 796778
Reported-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This prevents leaks in the rare cases the function is called when extradata
already exists.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This only affected demuxers that didn't return reference counted packets.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This will replace the 1024 character limited filename field. Compatiblity for
output contexts are provided by copying filename field to URL if URL is unset
and by providing an internal function for muxers to set both url and filename
at once.
Signed-off-by: Marton Balint <cus@passwd.hu>
Enables getting access to ID3 PRIV tags from the command-line or metadata API
when demuxing. The PRIV owner is stored as the metadata key prepended with
"id3v2_priv.", and the data is stored as the metadata value. As PRIV tags may
contain arbitrary data, non-printable characters, including NULL bytes, are
escaped as \xXX.
Similarly, any metadata tags that begin with "id3v2_priv." are inserted as ID3
PRIV tags into the output (assuming the format supports ID3). \xXX sequences in
the value are un-escaped to their byte value.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
It was sort of optional before - if you didn't call it, networking was
initialized on demand, and an ugly warning was logged. Also, the doxygen
comments threatened that it would be made strictly required one day.
Make it explicitly optional. I would prefer to deprecate it fully, but
there might still be legitimate reasons to use this. But the average
user won't need it.
This is needed only for two reasons: to initialize TLS libraries like
OpenSSL and GnuTLS, and winsock.
OpenSSL and GnuTLS were already silently initialized on demand if the
global network init function was not called. They also have various
thread-safety acrobatics, which make concurrent initialization within
libavformat safe. In addition, the libraries are moving towards making
their global init functions safe, which removes all need for central
global init. In particular, GnuTLS 3.5.16 and OpenSSL 1.1.0g have been
found to have safe init functions. In all cases, they use internal
reference counters to avoid that the global uninit functions interfere
with concurrent uses of the library by other API users who called global
init.
winsock should be thread-safe as well, and maintains an internal
reference counter as well.
Since we still support ancient TLS libraries, which do not have this
fixed, and since it's unknown whether winsock and GnuTLS
reinitialization is costly in any way, don't deprecate the libavformat
functions yet.
It's completely absurd that libavcodec would care about libavformat
locking, but it was there because the lock manager was in libavcodec.
This is more stright forward. Changes ABI, but we don't require ABI
compatibility currently.
2LL << (wrap_bits=64 - 1) does not fit in int64_t; change the
code to use a uint64_t (2ULL) and add an av_assert2() to
ensure wrap_bits <= 64.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It has no reason to be in a public header, even if defined as private.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
