* qatar/master:
mov: Don't av_malloc(0).
avconv: only allocate 1 AVFrame per input stream
avconv: fix memleaks due to not freeing the AVFrame for audio
h264-fate: remove -strict 1 except where necessary (mr4/5-tandberg).
misc Doxygen markup improvements
doxygen: eliminate Qt-style doxygen syntax
g722: Add a regression test for muxing/demuxing in wav
g722: Change bits per sample to 4
g722dec: Signal skipping the lower bits via AVOptions instead of bits_per_coded_sample
api-example: update to use avcodec_decode_audio4()
avplay: use avcodec_decode_audio4()
avplay: use a separate buffer for playing silence
avformat: use avcodec_decode_audio4() in avformat_find_stream_info()
avconv: use avcodec_decode_audio4() instead of avcodec_decode_audio3()
mov: Allow empty stts atom.
doc: document preferred Doxygen syntax and make patcheck detect it
Conflicts:
avconv.c
ffplay.c
libavcodec/mlpdec.c
libavcodec/version.h
libavformat/mov.c
tests/codec-regression.sh
tests/fate/h264.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (22 commits)
configure: add check for w32threads to enable it automatically
rtmp: do not hardcode invoke numbers
cinepack: return non-generic errors
fate-lavf-ts: use -mpegts_transport_stream_id option.
Add an APIchanges entry and a minor bump for avio changes.
avio: Mark the old interrupt callback mechanism as deprecated
avplay: Set the new interrupt callback
avconv: Set new interrupt callbacks for all AVFormatContexts, use avio_open2() everywhere
cinepak: remove redundant coordinate checks
cinepak: check strip_size
cinepak, simplify, use AV_RB24()
cinepak: simplify, use FFMIN()
cinepak: Fix division by zero, ask for sample if encoded_buf_size is 0
applehttp: Fix seeking in streams not starting at DTS=0
http: Don't use the normal http proxy mechanism for https
tls: Handle connection via a http proxy
http: Reorder two code blocks
http: Add a new protocol for opening connections via http proxies
http: Split out the non-chunked buffer reading part from http_read
segafilm: add support for raw videos
...
Conflicts:
avconv.c
configure
doc/APIchanges
libavcodec/cinepak.c
libavformat/applehttp.c
libavformat/version.h
tests/lavf-regression.sh
tests/ref/lavf/ts
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
tls: Use ERR_get_error() in do_tls_poll
indeo3: Fix a fencepost error.
mxfdec: Fix comparison of unsigned expression < 0.
mpegts: set stream id on just created stream, not an unrelated variable
ra288: return error if input buffer is too small
ra288: utilize DSPContext.vector_fmul()
ra288: use memcpy() to copy decoded samples to output
mace: only calculate output buffer size once
Remove redundant filename self-references inside files.
indeo3data: add missing config.h #include for HAVE_BIGENDIAN
x86: drop pointless ARCH_X86 #ifdef from files in x86 subdirectory
avplay: reset rdft when closing stream.
doc/git-howto: expand format-patch and send-email notes.
lavf: expand doxy for some AVFormatContext fields.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (23 commits)
x86inc: use sse versions of common macros instead of sse2 when applicable
doc/APIchanges: add missing dates and hashes
lavf: don't return from void av_update_cur_dts()
Changelog: add more entries.
Changelog: update ffmpeg/avconv incompatibility list.
avconv: remove some redundant temporary variables.
avconv: fix broken indentation
avconv: move copy_initial_nonkeyframes to the options context.
avconv: use file:stream instead of file.stream in log messages.
doc/avconv: elaborate on basic functionality.
doc/avconv: -sample_fmts, not -help sample_fmts prints the sample formats
openssl: Only use CRYPTO_set_id_callback on OpenSSL < 1.0.0
Call avformat_network_init/deinit in the programs
Remove leftover includes of strings.h
avutil: Don't allow using strcasecmp/strncasecmp
Replace all usage of strcasecmp/strncasecmp
avstring: Add locale independent implementations of strcasecmp/strncasecmp
avstring: Add locale independent implementations of toupper/tolower
cosmetics: insert some spaces in explicit enum value assignments
move 8SVX audio codecs to the audio codec list part on the next bump
...
Conflicts:
avprobe.c
doc/APIchanges
ffplay.c
ffserver.c
libavcodec/avcodec.h
libavdevice/bktr.c
libavdevice/v4l.c
libavdevice/v4l2.c
libavformat/matroskaenc.c
libavformat/wtv.c
libavutil/avstring.c
libavutil/avstring.h
libavutil/avutil.h
libswscale/x86/swscale_template.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This patch reimplements early frame drop, it is now based on the current
difference between the master clock and the video clock, and the pts of the
current and the last displayed (or skipped) frame. If the frame to be added to
the queue is late after decoding, then we drop it early because later we would
drop it anyway (unless it is the only frame in the picture queue).
The current approach has only one downside that I know of, it does not handle
well when the filters are changing significantly the pts of the frames, because
we compare pts values from filtered and unfiltered frames.
We also start using the pictq_mutex to ensure consistent video_current_pts,
video_current_pts_drift, frame_last_pts, frame_last_dropped_pts and
frame_last_dropped_pos values.
Signed-off-by: Marton Balint <cus@passwd.hu>
* qatar/master:
id3v2: fix doxy comment - 'machine byte order' makes no sense on char arrays
VC1: restore mistakenly removed code
twinvq: check output buffer size before decoding
twinvq: return an error when the packet size is too small
lavf: export some forgotten symbols with non-av prefixes.
swscale: update altivec yuv2planeX asm to new per-plane API.
swscale: make yuv2yuvX_10_sse2/avx 8/9/16-bits aware.
yuv2planeX10 SIMD
swscale: decide whether to use yuv2plane1/X on a per-plane basis.
swscale: reintroduce full precision in 16-bit output.
Split up yuv2yuvX functions
Split out yuv2yuv1 luma and chroma in order to make them generic DSP functions
lavc: replace references to deprecated AVCodecContext.error_recognition to use AVCodecContext.err_recognition
lavc: translate non-flag-based er options into flag-based ef options at codec open
add -err_filter AVOptions to access flag-based error recognition
h264_weight: initialize "height" function argument properly.
presets: spelling error in libvpx 1080p50_60
avplay: fix fullscreen behaviour with SDL 1.2.14 on Mac OS X
Conflicts:
ffplay.c
libavformat/libavformat.v
libswscale/swscale.c
libswscale/x86/swscale_template.c
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Fixes missing blue channel when switching from/to fullscren on OSX and libsdl
1.2.14. Fixes issue 548. Thanks for Jean First for the original patch and
for testing.
Signed-off-by: Marton Balint <cus@passwd.hu>
If the picture queue is empty, or when the calculated delay is 0, frame_timer
is not increased but we are still displaying the old frame. When we eventually
get a frame, where the computed delay is positive, so we don't need to drop any
more frames, then it is best to update frame_timer to be as near as the current
time as it can.
This way we dont't have to wait several frames to add the necesarry delays to
frame_timer to reach current time, therefore there are no extra frame drops
after reaching a positive delay.
Signed-off-by: Marton Balint <cus@passwd.hu>
The current impementation of early frame drops (dropping frames before adding
them to the picture queue) has multiple problems:
Even after gettin A-V sync, the frame droping continues until
VideoState->skip_frames reaches 1, which can take a lot of time causing useless
additional frame drops and bad AV-sync. This issue can be easily triggered with
for example changing the audio stream.
Also video_refresh currenly does not handle early skipped frames in every case,
for example if we skip a frame, then the last frame duration calculation will
compute the duration of the sum of the skipped frame and the duration of the
frame before that, and in compute_target_delay we may multiply this unusually
big delay.
Signed-off-by: Marton Balint <cus@passwd.hu>
Since target clock is based on the current A-V delay, it is better calculate it
when we actually need it rather than when we put a picture in the picture
queue.
The patch also makes a code a bit more readable by renaming some delay
variables to duration, and converting compute_target_time to a delay
calculating function which does not modify the state. Factoring out the
iteration of the pictq to standalone function is also done in this patch.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously ffplay expected SDL_AudioOpen to provide the requested sample rate
and channel number. This is no longer a requirement because this patch replaces
the audio convert function with libswresample's swr_convert which is capable of
handling different sample formats, sample rates and different number of
channels and different channel layouts.
The patch also removes the hardcoded 16bit samples assumption and uses
av_get_bytes_per_sample almost everywhere. The only exceptions are
the update_sample_display and video_audio_display functions, it
seemed too much of a headache to make them generic.
We also fix a tiny bug in sdl_audio_callback, we ensure that the number of
bytes when we put silence in the buffer is a multiple of the frame size.
* qatar/master: (21 commits)
fate: allow testing with libavfilter disabled
x86: XOP/FMA4 CPU detection support
ws_snd: misc cosmetic clean-ups
ws_snd: remove the 2-bit ADPCM table and just subtract 2 instead.
ws_snd: use memcpy() and memset() instead of loops
ws_snd: use samples pointer for loop termination instead of a separate iterator variable.
ws_snd: make sure number of channels is 1
ws_snd: add some checks to prevent buffer overread or overwrite.
ws_snd: decode to AV_SAMPLE_FMT_U8 instead of S16.
flacdec: fix buffer size checking in get_metadata_size()
rtp: Simplify ff_rtp_get_payload_type
rtpenc: Add a payload type private option
rtp: Correct ff_rtp_get_payload_type documentation
avconv: replace all fprintf() by av_log().
avconv: change av_log verbosity from ERROR to FATAL for fatal errors.
cmdutils: replace fprintf() by av_log()
avtools: parse loglevel before all the other options.
oggdec: add support for Xiph's CELT codec
sol: return error if av_get_packet() fails.
cosmetics: reindent and pretty-print
...
Conflicts:
avconv.c
cmdutils.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/oggparsecelt.c
libavformat/utils.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add LATM demuxer
avplay: flush audio decoder with empty packets at EOF if the decoder has CODEC_CAP_DELAY set.
8svx/iff: fix decoding of compressed stereo 8svx files.
8svx: log an error message if output buffer is too small
8svx: check packet size before reading the initial sample value.
8svx: output 8-bit samples instead of 16-bit.
8svx: split delta decoding into a separate function.
mp4: Don't read an empty Decoder Config Descriptor
fate.sh: Ignore errors from rm command during cleanup.
fate.sh: Run git-pull in quiet mode to avoid console spam.
Apple ProRes decoder
rtmp: Make the input FLV parser handle data cut at any point
rv34: Check for invalid slices offsets
eval: test isnan(sqrt(-1)) instead of just sqrt(-1)
Conflicts:
Changelog
libavcodec/8svx.c
libavcodec/proresdec.c
libavcodec/version.h
libavformat/iff.c
libavformat/version.h
tests/ref/fate/eval
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This is done in order to clarify the non-video-specific nature of the
buffersink code, as the result of the video/audio API unification of
the previous commit, and for improving overall consistency.
The new API is more generic (no distinction between audio/video for
pulling frames), and avoids code duplication.
A backward compatibility layer is kept for avoiding tools ABI breaks
(only for the video binary interface, audio interface was never used
in the tools).
* qatar/master:
lavc: fix type for thread_type option
avconv: move format to options context
avconv: move limit_filesize to options context
avconv: move start_time, recording_time and input_ts_offset to options context
avconv: add a context for options.
cmdutils: allow storing per-stream/chapter/.... options in a generic way
cmdutils: split per-option code out of parse_options().
cmdutils: add support for caller-provided option context.
cmdutils: declare only one pointer type in OptionDef
cmdutils: move grow_array() from avconv to cmdutils.
cmdutils: move exit_program() declaration to cmdutils from avconv
http: Consider the stream as seekable if the reply contains Accept-Ranges: bytes
nutenc: add namespace to the api facing functions
Conflicts:
avconv.c
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
ffprobe.c
ffserver.c
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
AVOptions: fix av_set_string3() doxy to match reality.
cmdutils: get rid of dummy contexts for examining AVOptions.
lavf,lavc,sws: add {avcodec,avformat,sws}_get_class() functions.
AVOptions: add AV_OPT_SEARCH_FAKE_OBJ flag for av_opt_find().
cpu detection: avoid a signed overflow
Conflicts:
avconv.c
cmdutils.c
doc/APIchanges
ffmpeg.c
libavcodec/options.c
libavcodec/version.h
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If the video queue is aborted, we have to pop the pending ALLOC event or wait
for the allocation to complete, because the current code assumes that
VideoState->pictq_windex does not change until the allocation is complete.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Altough ffplay is working pretty well without using a lock manager, it is still
a multithreaded application calling libavcodec functions from multiple threads,
so using a lock manager is probably a good idea.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Getting rid of globals are generally a good thing. The patch also makes
toggle_pause and step_to_next_frame use a function parameter instead of
the global cur_stream variable.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This way the content of "vfilters" can be reused.
For example when the frame size changes, the filterchain is
reconfigured reusing again the vfilters value.
Use av_log(AV_LOG_LEVEL...) rather than av_dlog, the log is useful
even for "normal" debugging, and consistent with what is done in
ffmpeg.
Also change the message to achieve better consistency with the
corresponding ffmpeg message.
