Add arm64 neon implementations for hscale 16 to 15 with filter
sizes 4, 8 and X4.
The tests and benchmarks run on AWS Graviton 2 instances.
The results from a checkasm tool are shown below.
hscale_16_to_15__fs_4_dstW_512_c: 6703.5
hscale_16_to_15__fs_4_dstW_512_neon: 2298.0
hscale_16_to_15__fs_8_dstW_512_c: 10983.0
hscale_16_to_15__fs_8_dstW_512_neon: 3216.5
hscale_16_to_15__fs_12_dstW_512_c: 15526.0
hscale_16_to_15__fs_12_dstW_512_neon: 3993.0
hscale_16_to_15__fs_16_dstW_512_c: 20183.5
hscale_16_to_15__fs_16_dstW_512_neon: 5369.7
hscale_16_to_15__fs_32_dstW_512_c: 39315.2
hscale_16_to_15__fs_32_dstW_512_neon: 9511.2
hscale_16_to_15__fs_40_dstW_512_c: 48995.7
hscale_16_to_15__fs_40_dstW_512_neon: 11570.0
(Note, the checkasm tests for these functions haven't been
merged since they fail on x86.)
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add arm64 neon implementations for hscale 8 to 19 with filter
sizes 4, 4X and 8. Both implementations are based on very similar ones
dedicated to hscale 8 to 15. The major changes refer to saving
the data - instead of writing the result as int16_t it is done
with int32_t.
These functions are heavily inspired on patches provided by J. Swinney
and M. Storsjö for hscale8to15 which were slightly adapted for
hscale8to19.
The tests and benchmarks run on AWS Graviton 2 instances. The results
from a checkasm tool shown below.
hscale_8_to_19__fs_4_dstW_512_c: 5663.2
hscale_8_to_19__fs_4_dstW_512_neon: 1259.7
hscale_8_to_19__fs_8_dstW_512_c: 9306.0
hscale_8_to_19__fs_8_dstW_512_neon: 2020.2
hscale_8_to_19__fs_12_dstW_512_c: 12932.7
hscale_8_to_19__fs_12_dstW_512_neon: 2462.5
hscale_8_to_19__fs_16_dstW_512_c: 16844.2
hscale_8_to_19__fs_16_dstW_512_neon: 4671.2
hscale_8_to_19__fs_32_dstW_512_c: 32803.7
hscale_8_to_19__fs_32_dstW_512_neon: 5474.2
hscale_8_to_19__fs_40_dstW_512_c: 40948.0
hscale_8_to_19__fs_40_dstW_512_neon: 6669.7
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
The FFmpeg encoder does not increment the temporal reference field, so use
that knowledge plus the extradata field to detect buggy versions of the encoder.
Fixes ticket #128.
The SVQ1 interframe mean VLC symbols -128 and 128 are incorrectly swapped
in our SVQ1 implementation, resulting in visible artifacts for some videos.
This patch unswaps the order of these two symbols.
The most noticable example of the artiacts caused by this error can be observed in
https://trac.ffmpeg.org/attachment/ticket/128/svq1_set.7z '352_288_k_50.mov'.
The artifacts are not observed when using the reference decoder
(QuickTime 7.7.9 x86 binary).
As a result of this patch, the reference data for the fate-svq1 test
($SAMPLES/svq1/marymary-shackles.mov) must be modified. For this file, our
decoder output is now bitwise identical to the reference decoder. I have
tested patch with various other samples and they are all now bitwise identical.
ff_mpeg1_dc_scale_table is the default value for
[yc]_dc_scale_table (as set by ff_mpv_common_defaults()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This e.g. allows compilers to bake the offset implied
by using ff_mpeg12_dc_scale_table[3] (as the SpeedHQ encoder
does) into the general offset; for certain arches this is
also necessary in order to avoid building suboptimal code.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These tables are only accessed in ff_set_qscale()
which only accesses values 1..31 as well as in
encode_picture() in mpegvideo_enc.c, accessing
the value with index 8. So make these tables smaller.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For encoders, mpeg_quant is an option of the MPEG-4 encoder
and therefore constant. This implies that one can set
the dct_unquantize_(intra|inter) function pointers during init.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The frei0r API requires linesize to be width * 4.
Since the align property of ff_default_get_video_buffer2
specifies line alignment, not buffer alignment, the
previous value of 16 breaks this requirement for frames
whose width is a multiple of 8, but not a multiple of 16
as it adds extra padding to ensure line aligment.
Fix Trac ticket #9873
This basically reverts cc0380222a.
At the time of said commit, cleanup on init failure was very
buggy. For codecs with the INIT_CLEANUP cap, the close function
could be called on error even before the private data has been
allocated; and when using frame threading the same could also
happen even without said flag. Some mpegvideo decoders were
affected by the latter.
Yet both of these issues have been fixed long ago, the latter
in commit e9b6617579. Therefore
the workaround in ff_mpv_common_end() can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids checks and allows to make ff_wmv2_decode_mb() static;
furthermore, it allows to avoid a config_components.h inclusion.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only encoders need two sets of int16_t [12][64]
(one to save the current best state and one for the current
working state); decoders need only one. This saves 1.5KiB
per slice context for a decoder.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only used by metasound.c, so this allows to make
the data static.
To do this, remove metasound_data.h, rename metasound_data.c
into metasound_data.h (and add inclusion guards, remove ff_
prefixes etc.).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Namely into a header metasound_twinvq_data.h included
in twinvq.c (the common file of MetaSound and TwinVQ).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This can be achieved by moving the AVOnce out of the structure
containing the function pointers; the latter can then be made
const.
This also has the advantage of eliminating padding in the structure
(sizeof(AVOnce) is four here) and allowing the AVOnces to be put
into .bss (dependening upon the implementation).
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is possible to avoid the factors array for the power-of-two
tables for which said array is unused by using a different
structure for initialization for power-of-two tables than for
non-power-of-two-tables. This saves 3*15*16B from .data.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Treat the 32 bit stride registers as signed.
Alternatively, we could make the stride arguments ptrdiff_t instead
of int, and changing all of the assembly to operate on these
registers with their full 64 bit width, but that's a much larger
and more intrusive change (and risks missing some operation, which
would clamp the intermediates to 32 bit still).
Fixes: https://trac.ffmpeg.org/ticket/9985
Signed-off-by: Martin Storsjö <martin@martin.st>
Support for building with older versions of MSVC (with the
c99wrap/c99conv frontend) was removed in
ce943dd6ac.
Signed-off-by: Martin Storsjö <martin@martin.st>
This effectively reverts 9b78abae19.
The underlying issue has been fixed properly in commit
cff480e49d.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_rl_init() initializes RLTable.(max_level|max_run|index_run);
max_run is unused by the SpeedHQ encoder (as well as MPEG-1/2).
Furthermore, it initializes these things twice (for two passes),
but the second half of this is never used.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_rl_init() initializes RLTable.(max_level|max_run|index_run);
max_run is unused by the MPEG-1/2 encoders (as well as SpeedHQ).
Furthermore, it initializes these things twice (for two passes),
but the second half of this is never used.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to exploit that ff_rl_mpeg1 and ff_rl_mpeg2
only differ in their VLC table.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_rl_mpeg1 and ff_rl_mpeg2 differ only in RLTable.table_vlc,
which ff_rl_init() does not use to initialize RLTable.max_level,
RLTable.max_run and RLTable.index_run. This implies
that these tables agree for ff_rl_mpeg1 and ff_rl_mpeg2;
hence one can just use one of them and avoid calling ff_rl_init()
ff_rl_mpeg2 alltogether.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This will allow to remove ff_rl_mpeg2 soon and remove
all uses of RLTable in MPEG-1/2/SpeedHQ later.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
