Anton Khirnov
37a749012a
lavc: rework handling of refcounted_frames=0
...
Use only proper AVFrame API (no assigning of whole frames, since that
hardcodes sizeof(AVFrame) into lavc).
Make a copy of the side data, so the caller can use av_frame_unref/free
on non-refcounted frames, eliminating the need for
avcodec_get_frame_defaults()/avcodec_free_frame().
2013-12-09 08:54:29 +01:00
Anton Khirnov
df7aba52b5
frame: cosmetics, reindent
2013-12-09 08:45:08 +01:00
Anton Khirnov
c342132fa8
frame: copy flags in av_frame_copy_props()
...
Flags can be considered metadata (at least those that are defined now).
2013-12-09 08:45:01 +01:00
Anton Khirnov
a1ee164869
lavc/decode_video(): always unref the frame if there is no output in decode_video
...
Not just on failure. This is the same thing that is done in the audio
path and should prevent leaks in decoders that allocate a frame, but
then end up not writing into it.
2013-12-09 08:44:34 +01:00
Anton Khirnov
85f947aefb
lavc: remove a pointless check in decode_audio4()
...
av_frame_unref() works fine on unallocated frames.
2013-12-09 08:44:24 +01:00
Anton Khirnov
d4f0f2d1e8
lavc: use buf[0] instead of data[0] as the indicator of an allocated frame
...
data[0] may be NULL for valid frames with hwaccel pixel formats.
2013-12-09 08:44:11 +01:00
Anton Khirnov
e5419709f5
lavc: remove the extended_data workarounds.
...
All decoders should now handle it properly.
2013-12-09 08:42:52 +01:00
Anton Khirnov
d351ef47d0
pthread_frame: use the AVFrame API properly.
...
Remove the extended_data workaround, all decoders should now handle this
properly.
2013-12-09 08:42:25 +01:00
Anton Khirnov
b605b123ef
mxpegdec: use the AVFrame API properly.
2013-12-09 08:41:57 +01:00
Anton Khirnov
afa21a12bf
p*menc: use the AVFrame API properly.
2013-12-09 08:41:20 +01:00
Anton Khirnov
e2274aa555
mjpegdec: use the AVFrame API properly.
2013-12-09 08:40:29 +01:00
d s
f0b234ab9e
avformat: AviSynth demuxer rewrite
...
Directly loads AviSynth through LoadLibrary instead of relying on
Video for Windows, and supports using AvxSynth (via dlopen) to
open scripts on Linux and OS X.
Error messages from AviSynth/AvxSynth are now reported through
av_log and exit, rather than the traditional behavior of generating
an error video that the user would need to watch to diagnose.
The main rewrite was authored by d s <avxsynth.testing@gmail.com>
from the AvxSynth team, with additional contributions by
Oka Motofumi <chikuzen.mo@gmail.com>
Stephen Hutchinson <qyot27@gmail.com>
Diego Biurrun <diego@biurrun.de>
Anton Khirnov <anton@khirnov.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
2013-12-08 21:54:50 +01:00
Diego Biurrun
19c20a0a1a
configure: Move adding of compat objects out of libc detection
2013-12-08 21:09:02 +01:00
Diego Biurrun
4958f35a2e
dsputil: Move apply_window_int16 to ac3dsp
...
The (optimized) functions are used nowhere else.
2013-12-08 17:57:15 +01:00
Diego Biurrun
120797e2ef
configure: Separate MinGW32 and MinGW64 libc handling
2013-12-08 01:00:36 +01:00
Guillaume Martres
9aa053cede
libvpx: do not mark VP9 as experimental when using libvpx >= 1.3.0
...
Signed-off-by: Diego Biurrun <diego@biurrun.de>
2013-12-08 00:28:27 +01:00
Michael Niedermayer
b6a9719941
dcadec: Decode LFE to avoid adding random data when downmixing with LFE
...
Signed-off-by: Tim Walker <tdskywalker@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
2013-12-06 23:37:05 +01:00
Justin Ruggles
d085f80fa1
webp: add a special case for a huffman table with only 1 symbol
...
The vlc reader cannot handle 0-bit huffman codes. For most
situations WebP uses the "simple" huffman coding for this case,
but that will only handle symbols up to 255. For the LZ77 distance
codes, larger symbol values are needed, so it can happen in rare
cases that a normal huffman table is used that only has a single
symbol.
2013-12-05 20:37:06 -05:00
Justin Ruggles
f51e3a1971
webp: do not call av_frame_free() on the user-provided frame
...
Fixes double-free on error.
2013-12-05 20:36:54 -05:00
Anton Khirnov
b73a8922d8
ljpegenc: split yuv encoding into a separate function
2013-12-05 13:38:07 +01:00
Anton Khirnov
fa4476815d
ljpegenc: split bgr encoding into a separate function
2013-12-05 13:37:56 +01:00
Anton Khirnov
daffed3b17
ljpegenc: accept bgr24 instead of bgra
...
The alpha plane is not encoded.
2013-12-05 13:37:41 +01:00
Anton Khirnov
0cdbc4d393
ljpegenc: rename the encoding function.
...
The new name is more consistent with the rest of Libav.
2013-12-05 13:37:32 +01:00
Anton Khirnov
72c0b8f724
ljpeg: remove a commented-out line
2013-12-05 13:37:09 +01:00
Anton Khirnov
24abd806ea
ljpegenc: deMpegEncContextize
...
The encoder uses almost none of the mpegvideo infrastructure, only some
fields from MpegEncContext.
The FATE results change because now an all-zero quant matrix is written
into the file. Since it is not used for anything for ljpeg, this should
not be a problem.
2013-12-05 13:35:55 +01:00
Anton Khirnov
86eb2eaac6
mjpegenc: do not pass MpegEncContext to ff_mjpeg_encode_dc()
...
This will allow deMpegEncContextizing the LJPEG encoder.
2013-12-05 13:35:30 +01:00
Anton Khirnov
3360ad9955
mjpegenc: do not pass MpegEncContext to ff_mjpeg_encode_picture_trailer()
...
This will allow deMpegEncContextizing the LJPEG encoder.
2013-12-05 13:35:15 +01:00
Anton Khirnov
058d5f2feb
mjpegenc: do not pass MpegEncContext to ff_mjpeg_encode_picture_header()
...
This will allow deMpegEncContextizing the LJPEG encoder.
2013-12-05 13:34:26 +01:00
Anton Khirnov
6d70639c7d
mjpegenc: do not pass MpegEncContext to jpeg_table_header()
...
Pass the three needed fields from it directly.
This will allow to deMpegEncContextize the LJPEG encoder.
2013-12-05 13:34:13 +01:00
Anton Khirnov
e1eaaec765
mjpegenc: remove commented out never-to-be-finished WIP cruft
2013-12-05 13:34:01 +01:00
Anton Khirnov
ff506c75b7
mjpegenc: do not pass MpegEncContext to put_huffman_table()
...
It only needs PutBitContext from it, so pass that directly.
2013-12-05 13:33:40 +01:00
Anton Khirnov
a1ba1f20b3
mjpegenc: cosmetics, reformat jpeg_put_comments()
2013-12-05 13:33:29 +01:00
Anton Khirnov
0812f5a40a
mjpegenc: write the JFIF header if the sample aspect ratio is set
...
MpegEncContext.aspect_ratio_info is never set for mjpeg, so this was
never written before.
2013-12-05 13:28:32 +01:00
Anton Khirnov
66499f34b5
mpegvideo: do not set current_picture_ptr in decoders
...
This code was originally added in
5f1948111a
to h263 to set decoded frame
pts to some random numbers (removed in
a1c5cc429d
) and then cargo culted to other
decoders.
The code is left in h263dec for now, since some part of the decoder
(apparently OBMC) relies on the specific previous frame to be reused.
2013-12-05 13:28:05 +01:00
Anton Khirnov
58a868968d
FATE: drop the last partial frame in the wmv8-drm test
...
This has already been done in eb066a4ce9
,
but the number of frames produced from that file changed due to
timestamps changes since then.
2013-12-05 13:27:52 +01:00
Anton Khirnov
ac1fc92ea4
vc1dec: move setting repeat_pict after frame_start() has been called.
...
This will allow removing the hacks where each decoder sets
current_picture_ptr on its own.
2013-12-05 13:27:24 +01:00
Anton Khirnov
282c6a1a0e
mpegvideo: make ff_release_unused_pictures() static
...
It is only called from one place in mpegvideo.c now. Also remove the
remove_current parameter, which is always 1.
2013-12-05 13:26:50 +01:00
Anton Khirnov
c99307caee
mpegvideo: make frame_size_alloc() static.
...
It is not called from outside of mpegvideo.c anymore.
2013-12-05 13:25:46 +01:00
Anton Khirnov
0b0a7a751d
mpegvideo: move encode-only parts of common_end() to encode_end()
2013-12-05 13:25:26 +01:00
Anton Khirnov
d0d111d059
mpegvideo: remove commented out cruft from ff_MPV_frame_end()
2013-12-05 13:25:15 +01:00
Anton Khirnov
381a722562
mpegvideo: split the encoding-only parts of ff_MPV_frame_end() into a separate function
2013-12-05 13:23:55 +01:00
Anton Khirnov
b7254288d2
mpegvideo: do not update last_non_b_pict_type in update_thread_context()
...
It is used for encoding only.
2013-12-05 13:23:33 +01:00
Anton Khirnov
1f8eb69079
mpegvideo: move encoding-only initialization from common_init() to encode_init()
2013-12-05 13:23:03 +01:00
Anton Khirnov
bedf952bb8
mpegvideo: move setting encoding-only vars from common_defaults() to encode_defaults()
2013-12-05 13:22:55 +01:00
Anton Khirnov
2cab011f0f
mpegvideo: don't copy input_picture_number in update_thread_context()
...
It is encoding-only, frame threading is not used for encoding.
2013-12-05 13:22:46 +01:00
Anton Khirnov
ff7ffe4809
mpeg4videodec: move showed_packed_warning from MpegEncContext to Mpeg4DecContext
2013-12-05 13:22:37 +01:00
Anton Khirnov
f7d228676c
mpeg4videodec: move intra_dc_threshold from MpegEncContext to Mpeg4DecContext
2013-12-05 13:22:18 +01:00
Anton Khirnov
a097f0049b
mpeg12dec: move first_slice from MpegEncContext to Mpeg1Context
2013-12-05 13:22:03 +01:00
Anton Khirnov
ff300e435e
mpegvideo: remove an unused variable
2013-12-05 13:21:57 +01:00
Anton Khirnov
e41ff4210a
mpeg4videodec: move use_intra_dc_vlc from MpegEncContext to Mpeg4DecContext
2013-12-05 13:19:22 +01:00