Writes color_primaries, color_trc and color_space to mxf
headers. ULs are from https://registry.smpte-ra.org/ site.
Signed-off-by: Harry Mallon <harry.mallon@codex.online>
Up until now, the TiVo demuxer parse an array of SEQ entries, yet it has
never ever made any use of them. In fact, parse_master, the function
parsing said table, only influenced the outside world in three ways: Via
an excessive amount of error message in case a certain parameter is not
what it expected; via an allocation (the aforementioned write-only
array); and by setting a certain parameter (ty->cur_chunk_pos), but that
parameter is always overwritten before it is used (it is overwritten
in get_chunk() on success and if get_chunk() fails, the error is
returned to the caller anyway). So remove the array and the function
used to parse it.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Alexander Strasser <eclipse7@gmx.net>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Reviewed-by: Alexander Strasser <eclipse7@gmx.net>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
It has no bearing on structure. Determined by looking at the ASF
files from several Argonaut games:
- FX Fighter,
- Croc,
- Croc 2,
- The Emperor's New Groove, and
- Disney's Aladdin in Nasira's Revenge
The only versions that appear are 1.1, 1.2, and 2.1, and their
structure is identical.
Reviewed-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Up until now, opening a section filter works as follows: A filter is
opened and (on success) attached to the MpegTSContext. Then a buffer for
said filter is allocated and upon success attached to the section
filter; on error, the filter is simply freed without removing it from
the MpegTSContext, leaving the latter in an inconsistent state. This
leads to use-after-frees lateron.
This commit fixes this by allocating the buffer first; the filter is
only opened if the buffer could be successfully allocated.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
fix ticket: 8783
Because in single file by encryption mode, it cannot get the last one
block of the file, it need ff_format_io_close for get full file size,
then hlsenc can get the total size of the encryption content,
so write the content into temp file first, and get the temp file content
append the temp file content into append to single file, then hlsenc can
get the correct file/content size and offset.
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
It leads to an assert in ff_read_packet().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reads color_primaries, color_trc and color_space from mxf
headers. ULs are from https://registry.smpte-ra.org/ site.
Signed-off-by: Harry Mallon <harry.mallon@codex.online>
This commit avoids allocating a DVDemuxContext when demuxing raw DV by
making it part of the demuxer's context. This also allows to remove
dv_read_close().
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'
Fixes: 24457/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-5760093644390400
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
flush_put_bits() already fills the bitstream with zeroes, so it is
unnecessary to align the bitstream before.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also query time only once, not for every variant stream, otherwise variant
streams might get a slightly different initial program date time. And we can
set this unconditionally because HLS_PROGRAM_DATE_TIME flag is checked
elsewhere.
Signed-off-by: Marton Balint <cus@passwd.hu>
For non-PCM audio, a Smacker frame contains the size of the decoded
audio in the first four bytes of the audio packet data; for PCM data,
said information would be redundant and according to [1] this field does
not exist. Therefore this commit sets the duration and timestamps
properly for PCM audio.
[1]: https://wiki.multimedia.cx/index.php/Smacker#Audio_Track_Chunk
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Add .read_seek function to the smacker demuxer for the special case of
seeking to ts=0. This is useful because smacker – like bink, with a
similar implementation – was mostly used to encode clips in video
games, where random seeks are rare but looping media are common.
Signed-off-by: Timotej Lazar <timotej.lazar@araneo.si>
libsrt changed the:
SRTO_SMOOTHER -> SRTO_CONGESTION
SRTO_STRICTENC -> SRTO_ENFORCEDENCRYPTION
and removed the front of deprecated options (SRTO_SMOOTHER/SRTO_STRICTENC)
in the header, it's lead to build fail
fix#8760
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Up until now, the Sega FILM muxer would first write all the packet data,
then shift the data (in the muxer's write_trailer function) by the amount
necessary to write the header at the front (which entails a seek to the
front), then seek back to the beginning and actually write the header.
This commit changes this: The dynamic buffer that is used to write the
sample table (containing information about each sample in the file) is
now used to write the complete header. This is possible because the size
of everything in the header except the sample table is known in advance.
Said buffer can then be used as one of the two temporary buffers used
for shifting which also reduces the amount one has to allocate for this.
Thereby the header will be written when shifting, so that the second
seek to the beginning is unnecessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the Sega FILM muxer would store some information about
each packet in a linked list. When writing the trailer, the information
in said linked list would be used to write a table in the file header.
Each entry in said table is 16 bytes long, but each entry of the linked
list is 32 bytes long (assuming 64 bit pointer and no padding).
Therefore it makes sense to remove the linked list and write the array
entries directly into a dynamic buffer while writing the packet (this is
possible because the table entries don't depend on any information not
available when writing the packet (the offset is not relative to the
beginning of the file, but to the end of the table). This also
simplifies writing the array at the end (there is no need to traverse a
linked list).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Mostly using intermediate pointers for accesses (i.e. storing s->pb in a
variable pb and then using pb for writing instead of s->pb) to improve
readability. Furthermore, the opening brace '{' of a function has been
moved into a line of its own in instances where it wasn't before.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also return proper error codes when it is absent: AVERROR(EINVAL)
instead of AVERROR_INVALIDDATA.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When using the WebM DASH Manifest muxer, every stream of each adaptation
set has to contain a metadata entry containing the filename of the
source file. In case of live stream manifests, said filename has to
conform to a pattern of
<file_description>_<representation_id>.<extension>. These pieces are
used to create the other strings that are actually output. Up until now,
these other strings would be allocated, used once and then freed
directly after usage. This commit changes this: The function that
allocated and assembled these strings now returns pointers to the '_'
and '.' delimiters and so that the caller can easily pick substrings
from it without needing to copy the string.
Avoiding allocations also fixes a memleak: One of the allocated strings
would leak upon a subsequent allocation failure.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In 1ec2b3de5a, the extradata size was affected when the raster was
signaled as flipped due to user-set option rather than via extradata.
This resulted in a wrong header size being written. Fixed.
The Matroska demuxer currently always opens a GetByteContext to read the
content of the projection's private data buffer; it does this even if
there is no private data buffer in which case opening the GetByteContext
will lead to a NULL + 0 which is undefined behaviour.
Furthermore, in this case the code relied both on the implicit checks
of the bytestream2 API as well as on the fact that it returns zero
if there is not enough data available.
Both of these issues have been addressed by not using the bytestream API
any more; instead the data is simply read directly by using AV_RB. This
is possible because the offsets are constants.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When parsing MXF encountering some tags leads to allocations. And when
these tags were encountered repeatedly, this could lead to memleaks,
because the pointer to the old data got simply overwritten with a
pointer to the new data (or to NULL on allocation failure). This has
been fixed.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MXF demuxer uses an array of pointers to different structures of
metadata (all containing a common initial sequence containing a type
field to distinguish them) and some of these structures contain pointers
to separately allocated subelements. If an error happens while reading
and creating the tags, the semi-finished new tag is freed using the
function to free these tags. But this function doesn't free the already
allocated subelements, because the type has not been set yet. This commit
changes this.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Said array contains pointers to other structs and both the designated
new element as well as other stuff contained in it (e.g. strings) leak
if the new element can't be added to the array.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
