This is a cuda implementation of yadif, which gives us a way to
do deinterlacing when using the nvdec hwaccel. In that scenario
we don't have access to the nvidia deinterlacer.
Simple parser to set keyframes, frame type, structure, width, height, and pixel
format, plus stream profile and level.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit implements a full ATRAC9 decoder, a simple low-delay codec
developed by Sony and used in most PSVita games, some PS3 games and some
PS4 games. Its similar to AAC in that it uses Huffman coded scalefactors
but instead of vector quantization it just Huffman codes the spectral
coefficients (in a way similar to how Opus splits band energy coding
into coarse and fine precision). It opts to write rather large Huffman
codes by packing several small coefficients into one Huffman coded
symbol, though I don't believe this increases efficiency at all.
Band extension implements SBC in a simple way, first it mirrors the
lower spectrum onto the higher frequencies and then it uses one of 5
filters to shape it. Noise substitution is implemented via 2 of them.
Unlike previous ATRAC codecs, there's no QMF, this is a standard MDCT
codec.
Based off of the reverse engineering work of Alex Barney.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Generates color bar test patterns based on EBU PAL recommendations.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
* commit 'c438899a706422b8362a13714580e988be4d638b':
Add AV1 video decoding support through libaom
This contains some extra changes taken from the libvpx decoder
wrapper, most of them contained in the set_pix_fmt() function.
Merged-by: James Almer <jamrial@gmail.com>
The protocol requires libsrt (https://github.com/Haivision/srt) to be
installed
Signed-off-by: Sven Dueking <sven.dueking@nablet.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
External headers are no longer welcome in the ffmpeg codebase because they
increase the maintenance burden. However, in the NVidia case the vanilla
headers need some modifications to be usable in ffmpeg therefore we still
provide them, but in a separate repository.
The external headers can be found at
https://git.videolan.org/?p=ffmpeg/nv-codec-headers.git
Fate-source is updated because of the deleted files, and dynlink_loader.h
license headers were updated with the standard FFmpeg headers.
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This commit adds an indev for Android devices on API level 24+ which
uses the Android NDK Camera2 API to capture video from builtin cameras
Signed-off-by: Felix Matouschek <felix@matouschek.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Most code between them is common, so put them in a new file for
miscellaneous VAAPI filters.
Signed-off-by: Yun Zhou <yunx.z.zhou@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
Add ProcAmp(color balance) vaapi video filter, use the option
like -vf "procamp_vaapi=b=10:h=120:c=2.8:s=3.7" to set
brightness/hue/contrast/saturation.
Signed-off-by: Yun Zhou <yunx.z.zhou@intel.com>
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This removes the XP compatibility code, and switches entirely to SWR
locks, which are available starting at Windows Vista.
This removes CRITICAL_SECTION use, which allows us to add
PTHREAD_MUTEX_INITIALIZER, which will be useful later.
Windows XP is hereby not a supported build target anymore. It was
decided in a project vote that this is OK.
Requires AMF headers for at least version 1.4.4.1.
Signed-off-by: Mikhail Mironov <mikhail.mironov@amd.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This was predictably nightmarish, given how ridiculous mpeg4 is.
I had to stare at the cuvid parser output for a long time to work
out what each field was supposed to be, and even then, I still don't
fully understand some of them. Particularly:
vop_coded: If I'm reading the decoder correctly, this flag will always
be 1 as the decoder will not pass the hwaccel any frame
where it is not 1.
divx_flags: There's obviously no documentation on what the possible
flags are. I simply observed that this is '0' for a
normal bitstream and '5' for packed b-frames.
gmc_enabled: I had a number of guesses as to what this mapped to.
I picked the condition I did based on when the cuvid
parser was setting flag.
Also note that as with the vdpau hwaccel, the decoder needs to
consume the entire frame and not the slice.
This is mostly straight-forward. The weird part is that it should
just work for mpeg1, but I see corruption in my test cases, so I'm
going to try and fix that separately.
* commit 'b90fdb2c7199cc8b0e8d994fafba1fb4dc181d88':
hevcdec: add a CUVID hwaccel
Adapted for ffmpeg by Timo Rothenpieler.
Merged-by: James Almer <jamrial@gmail.com>
Some parts of the code are based on a patch by
Timo Rothenpieler <timo@rothenpieler.org>
Merges Libav commit b9129ec466.
Due to the name clash with our cuvid decoder, rename it to nvdec.
This commit also changes the Libav code to dynamic loading of the
cuda/cuvid libraries.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This commit implements support for PCE (Program Configuration Elements) in the
AAC encoder, and as such allows for encoding of channel layouts not present
in the presets defined by the spec (which only lists the 8 most common ones).
This has been a highly requested feature and is also the first open source encoder
to support this many layouts.
Many thanks to pkviet <pkv.stream@gmail.com> who implemented support for and
verified all channel layouts.
This adds hardware decoding for H.264 / HEVC / VP8 / VP9 using the MPP
Rockchip API. It returns frames holding an AVDRMFrameDescriptor struct
in buf[0] that allows drm / dmabuf usage. Tested on RK3288 (TinkerBoard)
and RK3328.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This patchset enhances Alexis Ballier's original patch and validates
it using Qualcomm's Venus hardware (driver recently landed upstream
[1]).
This has been tested on Qualcomm's DragonBoard 410c and 820c
Configure/make scripts have been validated on Ubuntu 10.04 and
16.04.
Tested decoders:
- h264
- h263
- mpeg4
- vp8
- vp9
- hevc
Tested encoders:
- h264
- h263
- mpeg4
Tested transcoding (concurrent encoding/decoding)
Some of the changes introduced:
- v4l2: code cleanup and abstractions added
- v4l2: follow the new encode/decode api.
- v4l2: fix display size for NV12 output pool.
- v4l2: handle EOS (EPIPE and draining)
- v4l2: vp8 and mpeg4 decoding and encoding.
- v4l2: hevc and vp9 support.
- v4l2: generate EOF on dequeue errors.
- v4l2: h264_mp4toannexb filtering.
- v4l2: fixed make install and fate issues.
- v4l2: codecs enabled/disabled depending on pixfmt defined
- v4l2: pass timebase/framerate to the context
- v4l2: runtime decoder reconfiguration.
- v4l2: add more frame information
- v4l2: free hardware resources on last reference being released
- v4l2: encoding: disable b-frames for upstreaming (patch required)
[1] https://lwn.net/Articles/697956/
System Level view:
v42l_m2m_enc/dec --> v4l2_m2m --> v4l2_context --> v4l2_buffers
Reviewed-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Alexis Ballier <aballier@gentoo.org>
Tested-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
The filter supports two inputs and (implicitly) scaling the second input
during composition, unlike the software overlay.
The code has been separated into common interface and qsv overlay
implementation. The common part mainly creates the qsv session and
manages the surface which is nearly the same for all qsv filters.
So the qsvvpp.c/qsvvpp.h API can be used by other QSV vpp filters
to reduce code redundancy.
Usage:
-hwaccel qsv -c:v mpeg2_qsv -r 25 -i in.m2v -hwaccel qsv -c:v h264_qsv
-i in.h264 -filter_complex
"overlay_qsv=eof_action=repeat:x=(W-w)/2:y=(H-h)/2" -b 2M -maxrate 3M
-c:v h264_qsv -y out.h264
Two inputs should have different sizes otherwise one will be completely
covered or you need to scale the second input as follows:
-hwaccel qsv -c:v mpeg2_qsv -r 25 -i in.m2v -hwaccel qsv -c:v h264_qsv
-i in.h264 -filter_complex
"overlay_qsv=w=720:h=576:x=(W-w)/2:y=(H-h)/2" -b 2M -maxrate 3M -c:v
h264_qsv -y out.h264
Signed-off-by: ChaoX A Liu <chaox.a.liu@gmail.com>
Signed-off-by: Zhengxu Huang <zhengxu.maxwell@gmail.com>
Signed-off-by: Andrew Zhang <huazh407@gmail.com>
Change-Id: I5c381febb0af6e2f9622c54ba00490ab99d48297
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
This one changes the previous vmaf patch to libvmaf to keep it separate from the
native implementation of vmaf inside ffmpeg later.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
NASM is more actively maintained and permits generating dependency information
as a sideeffect of assembling, thus cutting build times in half.
(Cherry-picked from libav commit 57b753b445)
Signed-off-by: James Almer <jamrial@gmail.com>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The library has stopped being developed and Debian has removed it
from its repositories citing security issues.
The native Dirac decoder supports everything the library has and basic
encoding support is still provided via the native vc2 (Dirac Pro, intra
only version of Dirac) encoder. Hence, there's no reason to still support
linking to the library and potentially leading users into security issues.
Enables rendering of SVG images. This is possible since SVG images
still contain and specify the dimensions in pixels to which they've
been drawn to and thus enable browsers to display them without any
external data. Users can still override and generate images with
arbitrary resolutions.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This filter does not implement all features of MPEG7. Missing features:
- compression of signature files
- work only on (cropped) parts of the video
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit 'ad71d3276fef0ee7e791e62bbfe9c4e540047417':
lavfi: add a QSV deinterlacing filter
Minor fixup for lavfi differences.
Merged-by: Mark Thompson <sw@jkqxz.net>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This decoder can decode all existing SpeedHQ formats (SHQ0–5, 7, and 9),
including correct decoding of the alpha channel.
1080p is decoded in 142 fps on one core of my i7-4600U (2.1 GHz Haswell),
about evenly split between bitstream reader and IDCT. There is currently
no attempt at slice or frame threading, even though the format trivially
supports both.
NewTek very helpfully provided a full set of SHQ samples, as well as
source code for an SHQ2 encoder (not included) and assistance with
understanding some details of the format.
Decode the Image Data Section (which contains merged pictures).
Support RGB/A and Grayscale/A in 8bits and 16 bits per channel.
Support uncompress and rle decompression in Image Data Section.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also contains the following changes to the library:
- add ff_ prefix to functions
- remove cplusplus defines.
- add FF_ prefix to contants and some structs
- remove true peak calculation feature, since it uses its own resampler, and
af_loudnorm does not need it.
- remove version info and some fprintf(stderr) functions
- convert to use av_malloc
- always use histogram mode for LRA calculation, otherwise LRA data is slowly
consuming memory making af_loudnorm unfit for 24/7 operation. It also uses a
BSD style linked list implementation which is probably not available on all
platforms. So let's just remove the classic mode which not uses histogram.
- add ff_thread_once for calculating static histogram tables
- convert some functions to void which cannot fail
- remove intrinsics and some unused headers
- add support for planar audio
- remove channel / sample rate changer function, in ffmpeg usually we simply
alloc a new context
- convert some static variables to defines
- declare static histogram variables as aligned
- convert some initalizations to mallocz
- add window size parameter to init function and remove window size setter
function
- convert return codes to AVERROR
- fix indentation
Signed-off-by: Marton Balint <cus@passwd.hu>
The new decode API allows for m:n decode patterns, which is what
you need to use this hardware in a sane way. There are so many
situations where 1:1 doesn't happen naturally that it's a miracle
I got it working as well as I did.
With this change, we can throw all of the crazy heuristics and
sleeps(!) out, and things work correctly.
Add new mime types AAL2-G726 for g726 as suggested in rfc 3551.
This patch will break interaction with applications that incorrectly
use big-endian G.726 with mime type G726 but we know of at least one
device (DVTel camera) that correctly implements the rfc, so do the same.
Fixes ticket #5890.
This is a similar filter to f_metadata, only it works on side data. Since
adding side data from a user provided arbitrary binary string is unsafe,
because current code assumes that a side data of a certain kind has the proper
size, this filter only implements selection and deletion. Also, no value
matching support is implemented yet, because there is no uniform way to specify
a side data textually.
Signed-off-by: Marton Balint <cus@passwd.hu>
There is really no need for two aac wrappers, we already have
libfdk-aac which is better. Not to mention that faac doesn't
even support HEv1, or HEv2. It's also under a license which is
unusable for distribution, so it would only be useful to people
who will compile their own ffmpeg, only use it themselves (which
at that point should just use fdk-aac).
Signed-off-by: Josh de Kock <josh@itanimul.li>
This commit also drops SDL1 support for ffplay.
Tested-by: James Almer <jamrial@gmail.com> (Windows, mingw-w64)
Signed-off-by: Josh de Kock <josh@itanimul.li>
