This is similar to what was done before for output files and will allow
introducing demuxer-private state in future commits
Unlike for muxing, the code is moved to existing ffmpeg_demux.c rather
than to a new file. The reason is just file size - the demuxing code is
much smaller than muxing.
Now that we have proper options for defining display matrix
overrides, this should no longer be required.
fftools does not have its own versioning, so for now the define is
just set to 1 and disables the functionality if set to zero.
This enables overriding the rotation as well as horizontal/vertical
flip state of a specific video stream on the input side.
Additionally, switch the singular test that was utilizing the rotation
metadata to instead override the input display rotation, thus leading
to the same result.
This is now possible since OutputStream is a child of OutputFile and the
code allocating it can access MuxStream. Avoids the overhead and extra
complexity of allocating two objects instead of one.
Similar to what was previously done for OutputFile/Muxer.
Replace it with an array of streams in each OutputFile. This is a more
accurate reflection of the actual relationship between OutputStream and
OutputFile. This is easier to handle and will allow further
simplifications in future commits.
This is now possible since the code allocating OutputFile can see
sizeof(Muxer). Avoids the overhead and extra complexity of allocating
two objects instead of one.
Similar to what is done e.g. for AVStream/FFStream in lavf.
ffmpeg_opt.c currently contains code for
- parsing the options provided on the command line
- opening and initializing input files based on these options
- opening and initializing output files based on these options
The code dealing with each of these is for the most part disjoint, so it
makes sense to move them to separate files. Beyond reducing the quite
considerable size of ffmpeg_opt.c, this will also allow exposing muxer
internals (currently private to ffmpeg_mux.c) to the initialization
code, thus removing the awkward separation currently in place.
This simplifies the code as there is no other place the error buffer
is needed, so the av_err2str helper macro can be used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
av_err2str which is a wrapper for av_strerror already calls
strerror_r if available and if not has a fallback for the other
error codes that would be handled by that, so manually calling
strerror again if it fails is not necessary.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
av_err2str which is a wrapper for av_strerror already calls
strerror_r if available and if not has a fallback for the other
error codes that would be handled by that, so manually calling
strerror again if it fails is not necessary.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Currently it would essentially change the find_stream_info setting for
the file it was specified for and all following files, which is unusual
and somewhat unexpected behaviour for a per-file option and not even
documented to behave like this.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
It has been deprecated in favor of the aresample filter for almost 10
years.
Another thing this option can do is drop audio timestamps and have them
generated by the encoding code or the muxer, but
- for encoding, this can already be done with the setpts filter
- for muxing this should almost never be done as timestamp generation by
the muxer is deprecated, but people who really want to do this can use
the setts bitstream filter
av_display_rotation_get will return NAN when the display matrix is invalid,
which would end up printing NAN as an integer in the rotation field. This
is poor for multiple reasons:
* Users of ffprobe have no way of discerning "valid but ugly rotation from
display matrix" from "invalid display matrix".
* It can have unintended consequences on some platforms, such as Linux x86_64,
where NAN is equal to INT64_MIN, which, for example, when printed as JSON,
which uses floating point for all numbers, can end up as invalid JSON or wit
a number that cannot be reserialized as an integer at all.
Since NAN is av_display_rotation_get's error case, just print 0 (no rotation)
when that happens.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
There are two issues here. Firstly, the floating-point comparison
is always true. Seconly, the code depends on the default value of
min_hard_comp implicitly, which can be dangerous.
Partially fixes ticket 9859.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
For example, if the jpeg contains exif information
and the rotation direction is included in the exif,
the displaymatrix will be set on the side_data of the frame when decoding.
However, when ffplay is used to play the image,
only the side data in the stream will be determined.
It does not check whether the frame also contains rotation information,
causing it to play in the wrong direction
Reviewed-by: Zhao Zhili <zhilizhao@tencent.com>
Signed-off-by: Wang Yaqiang <wangyaqiang03@kuaishou.com>
It may be NULL, as is the case for D3D11VA_VLD.
Running "ffmpeg -h decoder=h264" on a Windows build
Before:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 (null) d3d11va cuda
After:
Decoder h264 [H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10]:
Supported hardware devices: dxva2 d3d11va cuda
Signed-off-by: James Almer <jamrial@gmail.com>
This is designed to improve and unify error handling for
allocation failures for the many (often small) allocations that we have
in the fftools. These typically either don't return an error message
or an error message that is not really helpful to the user
and can be replaced by a generic error message without loss of
information.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
update_video_stats() currently uses OutputStream.data_size to print the
total size of the encoded stream so far and the average bitrate.
However, that field is updated in the muxer thread, right before the
packet is sent to the muxer. Not only is this racy, but the numbers may
not match even if muxing was in the main thread due to bitstream
filters, filesize limiting, etc.
Introduce a new counter, data_size_enc, for total size of the packets
received from the encoder and use that in update_video_stats(). Rename
data_size to data_size_mux to indicate its semantics more clearly.
No synchronization is needed for data_size_mux, because it is only read
in the main thread in print_final_stats(), which runs after the muxer
threads are terminated.
It is either equal to OutputStream.enc_ctx->codec, or NULL when enc_ctx
is NULL. Replace the use of enc with enc_ctx->codec, or the equivalent
enc_ctx->codec_* fields where more convenient.
ost->enc is always non-NULL here, since
- this code is never called for streamcopy
- opening the output file will fail if an encoder cannot be found, so
filters are never initialized
This code cannot be triggered, since after 90944ee3ab opening the
output file will abort if an encoder cannot be found and streamcopy was
not explicitly requested.
It races with the demuxing thread. Instead, send the information along
with the demuxed packets.
Ideally, the code should stop using the stream-internal parsing
completely, but that requires considerably more effort.
Fixes races, e.g. in:
- fate-h264-brokensps-2580
- fate-h264-extradata-reload
- fate-iv8-demux
- fate-m4v-cfr
- fate-m4v
Don't silently replace it with the default layout for the amount of channels
from the requested layout.
Should fix ticket #9869
Signed-off-by: James Almer <jamrial@gmail.com>
c11fb46731 led to a regression whereby the return code for missing
input or input probe is overridden by writer close return code and
hence not conveyed in the exit code.
Use it instead of AVStream.codecpar in the main thread. While
AVStream.codecpar is documented to only be updated when the stream is
added or avformat_find_stream_info(), it is actually updated during
demuxing. Accessing it from a different thread then constitutes a race.
Ideally, some mechanism should eventually be provided for signalling
parameter updates to the user. Then the demuxing thread could pick up
the changes and propagate them to the decoder.
Discontinuity detection/correction is left in the main thread, as it is
entangled with InputStream.next_dts and related variables, which may be
set by decoding code.
Fixes races e.g. in fate-ffmpeg-streamloop after
aae9de0cb2.
This will allow to move normal offset handling to demuxer thread, since
discontinuities currently have to be processed in the main thread, as
the code uses some decoder-produced values.
InputFile.ts_offset can change during transcoding, due to discontinuity
correction. This should not affect the streamcopy starting timestamp.
Cf. bf2590aed3
-stream_loop is currently handled by destroying the demuxer thread,
seeking, then recreating it anew. This is very messy and conflicts with
the future goal of moving each major ffmpeg component into its own
thread.
Handle -stream_loop directly in the demuxer thread. Looping requires the
demuxer to know the duration of the file, which takes into account the
duration of the last decoded audio frame (if any). Use a thread message
queue to communicate this information from the main thread to the
demuxer thread.
This avoids a potential race with the demuxer adding new streams. It is
also more efficient, since we no longer do inter-thread transfers of
packets that will be just discarded.
This undocumented feature runtime-enables dumping input packets. I can
think of no reasonable real-world use case that cannot also be
accomplished in a different way. Keeping this functionality would
interfere with the following commit moving it to the input thread (then
setting the variable would require locking or atomics, which would be
unnecessarily complicated for a feature that probably nobody uses).
