* commit '0d1229f1d2b8f26dd50c6be7917bb8ed8cb95364':
voc: Split ff_voc_get_packet into a separate file
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
* commit 'b92962436bdcfae478c8598dca397a397762eef8':
mov: Fix the format specifier type for size
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This allows to copy information related to the stream ID from the demuxer
to the muxer, thus allowing for example to retain information related to
synchronous and asynchronous KLV data packets. This information is used
in the muxer when remuxing to distinguish the two kind of packets (if the
information is lacking, data packets are considered synchronous).
The fate reference changes are due to the use of
av_packet_merge_side_data(), which increases the size of the output
packet size, since side data is merged into the packet data.
Instead of a linked list constructed at av_register_all(), store them
in a constant array of pointers.
Since no registration is necessary now, this removes some global state
from lavf. This will also allow the urlprotocol layer caller to limit
the available protocols in a simple and flexible way in the following
commits.
Improves streaming compatibility with Windows Media Services. Also tested for
compatilbility in Windows Media Player, Windows Media ASF Viewer and VLC.
This version of the patch only writes exclusion among audio streams, therefore
choosing a subtitle language should be possible independently of audio language.
Signed-off-by: Marton Balint <cus@passwd.hu>
I discovered that ffserver streaming was broken (it seems like it has been since 20th November) and I opened a ticket for this (https://trac.ffmpeg.org/ticket/5250 <https://trac.ffmpeg.org/ticket/5250>).
I spent yesterday learning git bisect (with the kind help of cehoyos) to painstakingly track down the cause. This was made more difficult due to the presence of a segfault in ffserver during the period where the bug was introduced so I first had to identify when and how that was fixed and then retrospectively apply that fix again for each step of the second git bisect to find the actual bug.
Anyway, the fruits of my labour are the innocent looking patch below to correct a couple of typos and define a valid range for two variables.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fix cases where unknown data (data beyond p->buf_size) could produce a
higher ico probe score than if the unknown data was known and valid.
For example:
Header: OK, 2 frames
Frame 0: Unknown (offset points beyond end of probe buffer)
Frame 1: Invalid
Previously this example had a score of 25, even though the score would
be 1 if the unknown frame was known to be valid or 0 if it was known
to be invalid. For this example the score is now 1.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some muxer might or might not fit incomplete mp3 frames in
their packets.
Bug-Id: 899
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This can be made more efficient, but first and the main goal of this change is to
store it at all
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It is only used in a boolean context. Also clarify its documentation.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use with -use_localtime, and set -hls_segment_filename to a path which
contains a subdirectory i.e. /some/path/%Y%m%d/%Y%m%dT%H%M%S-%s.ts
This will mkdir the %Y%m%d-part of the path if it does not already
exist.
In addition, each filename in the playlist output will be prefixed with
this subdirectory (if playlist and segment shares the same base path).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This commit is a no-op.
* commit '5eb562831b3a9bea8026c413ef1338e06450d005':
mov: Use the correct type for size
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This avoid "libavformat/genh.c:43:14: warning: variable coef_splitted set but not used"
Fewer warnings makes it easier to see new and important warnings
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently it is broken when explicitly using the file protocol, it uses an
insecure temporary file name, and in commit b4431c80 disabling the option by
default was already considered. Also it is not very consistent to have such an
option for one particular muxer.
Signed-off-by: Marton Balint <cus@passwd.hu>
This also deprecates our old duplicated callbacks.
* commit '9f61abc8111c7c43f49ca012e957a108b9cc7610':
lavf: allow custom IO for all files
Merged-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The UUID is based on http://www.adobe.com/devnet/xmp.html
The patch is made according to XMP SPECIFICATION PART 3 - STORAGE IN
FILES See Table 8
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes infinite loops due to seeking back.
Signed-off-by: Alexandra Hájková <alexandra@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes infinite loops due to seeking back.
Signed-off-by: Alexandra Hájková <alexandra@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The loop can be very long, even though the file is very short.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Alexandra Hájková <alexandra@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
asf_read_payload can unset eof_reached, so check it also before calling
that function.
This fixes infinite loops.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Alexandra Hájková <alexandra@khirnov.net>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Silences: CID1351343
The header is calculated by the code above the changed hunk, it is
thus asserted that the header is always correct.
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can provide a manual workaround for ticket #4230.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Checked compatiblity with VLC, Windows Media Player 12 and Windows Media ASF
Viewer 9 series.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Note to maintainers: update tools
Note to maintainers: set a default whitelist for your protocol
If that makes no sense then consider to set "none" and thus require the user to specify a white-list
for sub-protocols to be opened
Note, testing and checking for missing changes is needed
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit 8ed82d8174.
SMPTE S377-1-2009c defines in F.4.1 that the Video Line Map should
always be an array with two 32 bit integers as elements. This is
repeated in G.2.12 with actual examples for progressive content,
where the second value would always be 0.
Additionally, the IRT MXF analyser also lists this as the only
error in the MXF output from ffmpeg: https://mxf-analyser-cloud.irt.de
Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This can cause problems with urls that have arguments after the filename
This reverts commit b0c57206d5.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Due to this bug in VC++ 2015 Update 1:
https://connect.microsoft.com/VisualStudio/feedback/details/2291638
the 'key' array in ff_read_riff_info() ends up being not null
terminated which led to failures in a Chromium unit tests. Update 2
should have a fix, but until then it is important to avoid problems.
The index creation is O(N^2) with number of entries (typically thousands).
On a Pi this can take more than 60 seconds to execute for a recording of a few hours.
By replacing with an O(N) loop, this takes virtually zero time
Liked-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Alpha requires addition of GBRAP12 pixel format.
Some muxer use the FLV field PreviousTagSize to be the sum of tag
length. Without this change, the flv demuxer think the file is broken
and the re-sync will fail.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This option can force the segmenter to only start a new segment if a packet
reaches the muxer within the specified duration after the segmenting clock
time, which makes it more resilient to backward local time jumps, such as leap
seconds or transition to standard time from daylight savings time.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Libav, for some reason, merged this as a public API function. This will
aid in future merges.
A define is left for backwards compat, just in case some person
used it, since it is in a public header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
commit "avpacket: Deprecate av_dup_packet" broke the use
av_interleaved_write_uncoded_frame as any input uncoded frame has an
invalid packet size that will crash when av_packet_ref tries to allocate
'size' new memory. Since the packet is a temporary created within mux.c
itself it can be used directly without needing a new ref.
Signed-off-by: Matt Oliver <protogonoi@gmail.com>
The purpose of this patch is to preserve timestamps when using ffmpeg for publishing RTMP streams, e.g. ffmpeg -i rtmp://source/stream -f flv rtmp://target/stream.
There is a setting "copyts" for that purpose. Unfortunately it doesn't work with FLV muxer because it has its own timestamp correction which makes global setting "copyts" ineffective.
This patch removes timestamp correction in FLV muxer. This means FLV will rely on ffmpeg timestamp correction which makes it possible to use copyts.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Possibly the check as a whole causes more problems than it helps, if so dont
hesitate to remove it
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some (de)muxers open additional files beyond the main IO context.
Currently, they call avio_open() directly, which prevents the caller
from using custom IO for such streams.
This commit adds callbacks to AVFormatContext that default to
avio_open2()/avio_close(), but can be overridden by the caller. All
muxers and demuxers using AVIO are switched to using those callbacks
instead of calling avio_open()/avio_close() directly.
(de)muxers that use the URLProtocol layer directly instead of AVIO
remain unconverted for now. This should be fixed in later commits.
adds two new options that may be set via the dictionary:
- send_buffer_size
- recv_buffer_size
When present, setsockopt() is used with SO_SNDBUF and SO_RCVBUF to set
socket buffer sizes. I chose to make send and receive independent
because buffering requirements are often asymmetric.
Errors in setting the buffer size mean the socket will use its
default, so they are ignored.
There is no sanity checking on values, as the kernel/socket layers
already impose reasonable limits if asked for something crazy.
Rationale for enlarging receive buffers is to reduce susceptibility
to intermittent network delays/congestion. I added setting the send
buffer for symmetry.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This feature is not know much or used much AFAIK, and it might be helpfull in
exploits.
No specific case is known where it can be used in an exploit though
subsequent commits depend on this commit though
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
With this, user applications which use custom IO and have set a IO context will not have
their already opened IO context ignored and glob/seq being interpreted
Comments and tests from maintainers of user apps are welcome!
Liked-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For http, this avoids spurious warnings about failed requests (e.g.
HTTP error 416 Requested Range Not Satisfiable), if the last packet
is truncated and the size read is bogus.
Signed-off-by: Martin Storsjö <martin@martin.st>
When loading a truncated flv file, it would previously try to do a seek to
the end of every packet read. For some input protocols (such as http), such
repeated seek attempts are cripple the reading performance.
Signed-off-by: Martin Storsjö <martin@martin.st>
