* commit '72fe16a13e3ebd5396ac173bf84c8b20085c16d5':
movenc: Use null buffers for measuring the amount of data to be written
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
movenc: Add an option for omitting the tfhd base offset
Conflicts:
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a bit more work, but avoids having to fill in
the data offset field afterwards instead of directly when
the rest of the trun atom is written.
This simplifies future cases where this field needs to be set to
something different.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8b524ab0c43c1767919530abb79d3656113cdc47':
movenc: Add a warning message if conflicting options have been specified
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure the faststart vs fragmentation check works as
intended when fragmentation is enabled due to using the ismv mode.
Signed-off-by: Martin Storsjö <martin@martin.st>
This should improve write performance quite significantly.
---
Tested with both writing a normal mp4, by using the faststart
feature and writing a fragmented mp4 file; all turn out with the
same md5sum as before.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '2bbad1f94cbc5eab0aa2d937bc79d085477d0242':
movenc: Properly free allocated data on failures in mov_write_header
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3559fb97c459c88b4f1d0eef80d55933d3b7fabe':
movenc: Check that tracks->enc exists before trying to free extradata
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d122b01e4ce539269ee2df193b061772c7374f6':
movenc: Check for allocation failures in mov_create_chapter_track
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On failures in the write_trailer function, we could also ignore
the errors and try to finish the file despite these errors (which
would only leave an incomplete chapters track). It's probably better
to signal the error clearly to the caller though (and if this
function failed there's no guarantee that there's enough memory to
finish the trailer either).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'b89e8759e053792704741d08cbc41c9ac3c7ed63':
mov: Write tmcd extradata
This commit should make no difference as we had tmcd support
already, which is not changed.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
QuickTime will play multiple audio tracks concurrently if this flag is
set for multiple audio tracks. And if no subtitle track has this flag
set, QuickTime will show no subtitles in the subtitle menu.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Faststart moves the moov atom to the beginning of the file and rewrites
the rest of the file after muxing is complete.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '6c786765cd5eb794dedd4a0970dfe689b16dfeeb':
movenc: Allow chapters to be written in trailer
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This allows creation of frame accurate chapter marks from sources
like DVD and BD where the precise chapter location is not known until
the chapter mark has been reached during reading.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '22de0f8369f1f3edf1a55e1d275f3c07c617b53e':
mov: Compute max duration among the tracks with a timescale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '39523030108815242178ac5e209c83070bd1baef':
mov: Set the timescale for data streams
Conflicts:
libavformat/movenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The mov/mp4 muxer has support for handling negative timestamps
via edit lists (which customarily is used for handling the 1-frame
delay due to B-frames as well).
Using the muxer's native way of handling it is better than using
the generic offsetting. The generic offsetting is a bit too
crude when e.g. the timebase of one track is 1/fps, where the
edit lists can handle it accurately.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'ab1189766a82a95f108005463cde75f73fcc0ae5':
movenc: Increase the cluster array allocation by doubling
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b4feac1ec14f861bdd7f494f288f4d8dd7f449e':
movenc: Keep track of the allocated size for the cluster array
mem: Add av_realloc_array and av_reallocp_array
Conflicts:
doc/APIchanges
libavformat/movenc.c
libavutil/mem.c
libavutil/mem.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous allocation increment of 16384 meant that the cluster
array was allocated for 0.6 MB initially, which is a bit excessive
for cases with fragmentation where only a fraction of that ever
actually is used.
Therefore, start off at a much smaller value, and increase by
doubling (to avoid reallocating too often when writing long
non-fragmented mp4 files).
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented mp4, the cluster array is reset when a
fragment is written. Instead of starting off reallocating the
array only based on the number of current elements in it, keep
track of how many elements there were allocated earlier.
This avoids reallocating this array needlessly when writing
fragmented mp4 files.
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by ffmpeg state
that they are 'piff' compatible via 'ftyp' box, this needs to be corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
According to the PIFF specification[1] the base_data_offset field MUST be
omitteed. See section 5.2.17. Since the ISMV files created by libavformat
state that they are 'piff' compatible via 'ftyp' box, this needs to be
corrected.
[1] http://www.iis.net/learn/media/smooth-streaming/protected-interoperable-file-format
Signed-off-by: Martin Storsjö <martin@martin.st>
Other software does not store it in this case, and the information
is provided by the codec stream
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The QuickTime specification does not contain any hint that the atom
must not be written in some cases and both the QuickTime and the
AVID decoders do not fail if the atom is present.
This change allows to signal (visually) interlaced streams with
a codec different from uncompressed video.
As a side-effect, this fixes ticket #2202
* qatar/master:
bgmc: Fix av_malloc checks in ff_bgmc_init()
rtp: set the payload type as stream id
Conflicts:
libavformat/rtpenc_chain.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some software does not support edit lists at all, the adobe flash
player seems to be one of these. Which results in AV sync errors when
edit lists are used to adjust AV sync.
2nd try on implementing this, the first try had various issues
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The timebases before where only guranteed to be 1/fps precisse
and could cause AV sync errors on low fps
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
