The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.
Fixes: https://trac.ffmpeg.org/ticket/1282
Signed-off-by: Peter Ross <pross@xvid.org>
init add three test examples:
1. check no endlist at the end
2. check endlist at the end
3. check hls_list_size 0 full list
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Change the some options location in avcodec_options to make code more
readable. And update the fate test with this change.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Now "-c copy" works.
Update FATE files.
Demuxer only split file into packets, no data is trimmed.
Encoder & muxer currently expect completely another format
where muxer writes stuff like disposal method which should
be really encoder job.
With this patch muxer only modifies delay between two packets.
Codec copy need to have same behavior between demuxer and
muxer to work correctly.
Fixes#6640.
The header guards were unnecessarily non-standard and the c file
inclusion trick means the files dont't have standard licence
headers.
Based on a patch by: Martin Vignali <martin.vignali@gmail.com>
This is needed because of 32bit float formats (which are difficult to
store in 16bits)
This also fixes undefined behavior found by fate
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
ISMV lacks any sort of edit list support, as well as tfxd is
effectively the PTS of the fragment for most intents and purposes.
Thus, if b-frames are requested without negative CTS offsets you
end up with N frames' worth of delay (tfxd PTS plus the CTS offset
of the first sample). Negative CTS offsets enable the first sample
to have CTS=DTS, and thus a/v desync due to b-frame reorder delay
is avoided.
Fixes vorbis mp4 audio files, with edit list specified. Since
st->skip_samples is not set in case of vorbis , ffmpeg computes the
start_time as negative.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add tests for upmixing and downmixing with audio channel counts that
have a corresponding default layout and also tests where there is no
default layout.
Update the existing "stereo4" test so it actually outputs stereo like
the other stereo tests. Rename the previous "stereo4" test into
"upmix1".
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Set make variable KEEP to non-zero value to preserve temp files
when a test has passed.
Helpful in diagnosing failed tests when test outfile is some type of
single hash and does not reveal differences in processed output.
da9cc22d5b allowed the MOV muxer to relay a custom stream handler name,
whether populated from the input stream or user-set. However, the entry
key didn't match the key set by the MOV demuxer, so it wasn't
effective. Fixed.
Due to the change, four FATE refs have to be updated. Verified that the
target payload of the tests hasn't changed in terms of CRC.
verify that the stco atom is upgraded to co64 when the addition of moov
size to the offsets results in an overflow
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If start_time is not set, ffmpeg takes the duration from the global
movie instead of the per stream duration.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Generic C implementation of vf_blend performs reads and writes of 16-bit
elements, which requires the buffers to be aligned to at least 2-byte
boundary.
Also, the change fixes source buffer overrun caused by src_offset being
added to to test handling of misaligned buffers.
Fixes: #7226
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This improves performance and makes qtrle behave more similar to other decoders.
Libavcodec does generally not output known duplicated frames, instead the calling Application
can insert them as it needs.
Fixes: Timeout
Fixes: 6383/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_QTRLE_fuzzer-6199846902956032
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses any devices it can find on the host system - on a system with no
hardware device support or in builds with no support included it will do
nothing and pass.
This new optional flag makes it easier to deal with mpegts
samples where the PMT is updated and elementary streams move
to different PIDs in the middle of playback.
Previously, new AVStreams were created per PID, and it was up
to the user to figure out which streams had migrated to a new PID
(by iterating over the list of AVProgram and making guesses), and
switch seamlessly to the new AVStream during playback.
Transcoding or remuxing these streams with ffmpeg on the CLI was
also quite painful, and the user would need to extract each set
of PIDs into a separate file and then stitch them back together.
With this new option, the mpegts demuxer will automatically detect
PMT changes and feed data from the new PID to the original AVStream
that was created for the orignal PID. For mpegts samples with
stream_identifier_descriptor available, the unique ID is used to
merge PIDs together. If the stream id is not available, the demuxer
attempts to map PIDs based on their position within the PMT.
With this change, I am able to playback and transcode/remux these
two samples which previously caused issues:
https://tmm1.s3.amazonaws.com/pmt-version-change.tshttps://kuroko.fushizen.eu/videos/pid_switch_sample.ts
I also have another longer sample in which the PMT changes
repeatedly and ES streams move to different pids three times
during playback:
https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts
Demuxing this sample with the new option shows several new log
messages as the PMT changes are handled:
[mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9
[mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98)
[mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d
[mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab
[mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7)
Signed-off-by: Aman Gupta <aman@tmm1.net>
Generates color bar test patterns based on EBU PAL recommendations.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Adds tests for the hue angle and brightness filter parameters.
Renames the existing saturation parameter test for consistency.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The artificial sample file sei-1.h264 contains five frames (IDR P B I B)
and the following SEI message types:
* Buffering period
* Picture timing
* Pan-scan rectangle (display as 4:3)
* User data registered, containing A/53 closed captions (captions match
frame content, including reordering)
* Recovery point (at the I frame)
* Display orientation (identity transformation)
* Mastering display (with arbitrary contents)
* Undefined SEI type 1234 (containing ascending bytes)
fix the warning: "function declaration isn’t a prototype", in C
int foo() and int foo(void) are different functions. int foo()
accepts an arbitrary number of arguments, while int foo(void) accepts 0
arguments.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
