ts->mux_rate is int (signed 32-bit) type. The period calculations
will start to overflow when mux_rate > 5mbps. This fixes overflows
by converting first to 64-bit type.
Fixes#5044.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The fps variable is explicitly set to -1 in case of some errors, the check must
thus be signed or the code setting it needs to use 0 as error code
the type of the field could be changed as well but its in an installed header
Fixes: integer overflow
Fixes: 9982cc157b1ea90429435640a989122f/asan_generic_3ad004a_3799_22cf198d9cd09928e2d9ad250474fa58.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: 36b8096fefab16c4c9326a508053e95c/signal_sigsegv_1d9ce18_3233_1a55196b018106dfabeace071a432d9e.r3d
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
lrint is faster, and is more consistent across the codebase.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
There was no reason AFAIK for making AV_CRC_24_IEEE 12. This simply
resulted in wasted space under --enable-hardcoded-tables:
dynamic: 1318672 libavutil/libavutil.so.55
old : 1330680 libavutil/libavutil.so.55
new : 1326488 libavutil/libavutil.so.55
Minor version number is bumped, with ifdefry due to API breakage.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
Do not clip output samples, so that clipping can be handled by other filters.
Alow setting curve points above 0dB. This is useful when operating with floats.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
This code is disabled by default so not to regress endpoints sending invalid MIME, but can be enabled via AVOption 'strict_mime_boundary'
Signed-off-by: Alex Agranovsky <alex@sighthound.com>
Fixes out of array read
Fixes: 0a7ff0c1d93da9cef28a315ec91b692a/asan_heap-oob_4a52e5_3604_9c56dbb20e308f4faeef7b35f688521a.ape
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch does 4 things, all of which interact and thus it
woudln't be possible to commit them separately without causing
either quality regressions or assertion failures.
Fate comparison targets don't all reflect improvements in
quality, yet listening tests show substantially improved quality
and stability.
1. Increase SF range utilization.
The spec requires SF delta values to be constrained within the
range -60..60. The previous code was applying that range to
the whole SF array and not only the deltas of consecutive values,
because doing so requires smarter code: zeroing or otherwise
skipping a band may invalidate lots of SF choices.
This patch implements that logic to allow the coders to utilize
the full dynamic range of scalefactors, increasing quality quite
considerably, and fixing delta-SF-related assertion failures,
since now the limitation is enforced rather than asserted.
2. PNS tweaks
The previous modification makes big improvements in twoloop's
efficiency, and every time that happens PNS logic needs to be
tweaked accordingly to avoid it from stepping all over twoloop's
decisions. This patch includes modifications of the sort.
3. Account for lowpass cutoff during PSY analysis
The closer PSY's allocation is to final allocation the better
the quality is, and given these modifications, twoloop is now
very efficient at avoiding holes. Thus, to compute accurate
thresholds, PSY needs to account for the lowpass applied
implicitly during twoloop (by zeroing high bands).
This patch makes twoloop set the cutoff in psymodel's context
the first time it runs, and makes PSY account for it during
threshold computation, making PE and threshold computations
closer to the final allocation and thus achieving better
subjective quality.
4. Tweaks to RC lambda tracking loop in relation to PNS
Without this tweak some corner cases cause quality regressions.
Basically, lambda needs to react faster to overall bitrate
efficiency changes since now PNS can be quite successful in
enforcing maximum bitrates, when PSY allocates too many bits
to the lower bands, suppressing the signals RC logic uses to
lower lambda in those cases and causing aggressive PNS.
This tweak makes PNS much less aggressive, though it can still
use some further tweaks.
Also update MIPS specializations and adjust fuzz
Also in lavc/mips/aacpsy_mips.h: remove trailing whitespace
matroskaenc.c applies divisors to the display width/height when generating
stereo content. This patch adds the corresponding multipliers to matroskadec.c
so that the original sample aspect ratio can be recovered.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
"Fast seek" uses linear interpolation to find the position of the
requested seek time. For CBR this is more direct than using the
mp3 TOC and bypassing the TOC avoids problems with TOC precision.
(see https://crbug.com/545914#c13)
For VBR, fast seek is not precise, so continue to prefer the TOC
when available (the lesser of two evils).
Also, some re-ordering of the logic in mp3_seek to simplify and
give usetoc=1 precedence over fastseek flag.
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This is likely more precise and conveys the intent better.
Reviewed-by: Mark Harris <mark.hsj@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
On systems having cbrt, there is no reason to use the slow pow function.
Sample benchmark (x86-64, Haswell, GNU/Linux):
new:
5124920 decicycles in cbrt_tableinit, 1 runs, 0 skips
old:
12321680 decicycles in cbrt_tableinit, 1 runs, 0 skips
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This further speeds up runtime initialization, with identical generated tables.
Sample benchmark (x86-64, Haswell, GNU/Linux):
old:
34441423 decicycles in mpegaudio_tableinit, 8192 runs, 0 skips
new:
10776291 decicycles in mpegaudio_tableinit, 8192 runs, 0 skips
Most low hanging fruit is taken care of here. For some idea, note that
83,064 array elements totalling 233,722 bytes need to be initialized.
Thus, with this patch, we average ~ 12.9 cycles per element or ~ 4.6
cycles per byte.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This does some miscellaneous stuff mainly avoiding the usage of pow to
achieve significant speedups. This is not speed critical, but is
unnecessary latency and cycles wasted for a user.
All tables tested and are identical to the old ones
(bit-exact even in floating point case).
Sample benchmark (x86-64, Haswell, GNU/Linux):
old:
102329530 decicycles in mpegaudio_tableinit, 1 runs, 0 skips
new:
34111900 decicycles in mpegaudio_tableinit, 1 runs, 0 skips
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This is useful for build-time table generation (--enable-hardcoded-tables),
by providing compat shims for hosts that have broken libms.
This file is deliberately kept minimal; functions can always be added on
an as-needed basis.
Reviewed-by: Clément Bœsch <u@pkh.me>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>