* qatar/master:
configure: Check for the math function rint
TechSmith Screen Codec 2 decoder
rtsp: Add listen mode
rtsp: Make rtsp_open_transport_ctx() non-static
rtsp: Move rtsp_read_close
rtsp: Parse the mode=receive/record parameter in transport lines
Conflicts:
Changelog
libavcodec/avcodec.h
libavcodec/version.h
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mss1: fix decoding masked regions in interframes
mxfdec: fix off by one error.
mxfdec: only parse next partition pack if parsing forward
mxfdec: let pkt->pts = mxf->current_edit_unit if intra-only
mxfdec: fix frame height vs field height confusion
mxfdec: Add intra_only flag to MXFTrack
mxfdec: fix Avid AirSpeed files being misinterpreted as OP1a
mxfdec: truncate packets that extend past the next edit unit
mxfdec: set pixel format for cdci picture formats
mxfdec: detect uncomp pictures using essence container ul
mxfdec: set track edit rate num/den in expected order
x86/cpu: implement get/set_eflags using intrinsics
x86/cpu: implement support for cpuid through intrinsics
x86/cpu: implement support for xgetbv through intrinsics
lavu: use intrinsics for emms on systems lacking inline asm support
mem: Don't abort on av_malloc(0) in debug mode
Conflicts:
configure
libavformat/mxf.h
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
We cannot do this in general since we could be reading
a file with B-frames while lacking an index.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This allows future assumptions to be made without affecting non-intra files.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The "ECs != 1 -> OP1a" assumption was wrong. Luckily, the file
that triggered that behavior had two ECs, not zero. Hence
distinguishing between them is simple in this case.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes rare cases where OPAtom may be treated
as OP1a, causing all essence to be read into RAM.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The properties of the CDCI Descriptor are insufficient to specify
the pixel format for uncompressed picture data. SMPTE 377-1 and
RP224v10 have defined a set of picture coding labels to indicate what
formatting was used.
This patch uses 2 labels to detect UYVY422 or YUYV422 pixel formats.
It defaults to UYVY422 for 8-bit 4:2:2 pictures to support files
that were created before the coding labels were introduced ~2008
The codec pix_fmt default was changed from 0 (PIX_FMT_YUV420P) to
-1 (PIX_FMT_NONE)
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports detection of uncompressed picture in files that
didn't include a Picture Coding Label. The lables weren't
available until SMPTE 377-1 and RP224v10
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This matches the order used for the index table edit rate.
Reviewed-by: Baptiste Coudurier <baptiste.coudurier@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* qatar/master:
mss3: use standard zigzag table
mss3: split DSP functions that are used in MTS2(MSS4) into separate file
motion-test: do not use getopt()
tcp: add initial timeout limit for incoming connections
configure: Change the rdtsc check to a linker check
avconv: propagate fatal errors from lavfi.
lavfi: add error handling to filter_samples().
fate-run: make avconv() properly deal with multiple inputs.
asplit: don't leak the input buffer.
af_resample: fix request_frame() behavior.
af_asyncts: fix request_frame() behavior.
libx264: support aspect ratio switching
matroskadec: honor error_recognition when encountering unknown elements.
lavr: resampling: add support for s32p, fltp, and dblp internal sample formats
lavr: resampling: add filter type and Kaiser window beta to AVOptions
lavr: Use AV_SAMPLE_FMT_NONE to auto-select the internal sample format
lavr: mix: validate internal sample format in ff_audio_mix_init()
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/libx264.c
libavfilter/audio.c
libavfilter/split.c
libavformat/tcp.c
tests/fate-run.sh
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cmutils: include shellapi.h on Win32 (for CommandLineToArgvW).
x86/timer: implement an intrinsic-based version for rdtsc (AV_READ_TIME).
id3v2: add a mimetype for bmp pictures.
flacdec: be less strict when parsing attached pictures.
flacdec: don't create an attached picture stream until we have all information.
Conflicts:
configure
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Add list extended format which specifies in the list file the start and
ending time for each segment. This is required to make it available this
information to external tools, avoiding the need to perform file analysis
in the output segments.
Only return an error if memory allocation fails or error recognition is
set to explode. Otherwise just print an error message and continue
reading the file.
* qatar/master:
mxfdec: replace x>>av_log2(sizeof(..)) by x/sizeof(..).
x86: h264_intrapred: Don't add the 'd' suffix to the SPLATB_REG macro
Conflicts:
libavformat/mxfdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also replace x>>av_log2(sizeof(..)) + 1 by x/sizeof(..). The +1 is
probably meant to emulate av_log2_ceil(sizeof(..)) in cases where ".."
is not a power of two.
* qatar/master:
configure: add functions for testing code fragments
af_amix: avoid spurious EAGAIN.
af_amix: return AVERROR(EAGAIN) when request_frame didn't produce output.
af_amix: only consider negative return codes as errors.
avconv: use only meaningful timestamps in start time check.
avconv: fix the check for -ss as an output option.
mss3: add forgotten 'static' qualifier for private table
lavc: options: add planar names for request_sample_fmt
flacdec: add planar output support
flvdec: Treat all nellymoser versions as the same codec
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
qdm2: remove broken and disabled dump_context() debug function
x86: h264_intrapred: use newly introduced SPLAT* and PSHUFLW macros
x86inc: add SPLATB_LOAD, SPLATB_REG, PSHUFLW macros
x86inc: modify ALIGN to not generate long nops on i586
x86: h264_intrapred: port to cpuflag macros
avplay: update input filter pointer when the filtergraph is reset.
avconv: fix parsing of -force_key_frames option.
h264: use templates to avoid excessive inlining
xtea: Make the count parameter match the documentation
blowfish: Make the count parameter match the documentation
mpegvideo: Don't use ff_mspel_motion() for vc1
xtea: invert branch and loop precedence
blowfish: invert branch and loop precedence
flvdec: optionally trust the metadata
avconv: Set audio filter time base to the sample rate
vp8: Add ifdef guards around the sse2 loopfilter in the sse2slow branch too
Conflicts:
ffmpeg.c
ffplay.c
libavcodec/h264.c
libavcodec/mpegvideo_common.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This avoids creating new AVStreams for them when switching between
different variants of them, since we can handle changes between
different sample rates of nellymoser within the same stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
After some internal talks it seems the code is similar to what is in FFmbc
by Baptiste Coudurier; Baptiste accepted to relicense the similiar chunks
from GPL to LGPL.
* qatar/master: (29 commits)
lavfi: reclassify showfiltfmts as a TESTPROG
graph2dot: fix printf format specifier
swscale: yuv2planeX 8bit >=sse2 functions need aligned stack on x86-32.
vp8: loopfilter >=sse2 functions need aligned stack on x86-32.
amr: remove shift out of the AMR_BIT() macro.
dsputilenc: group yasm and inline asm function pointer assignment.
mov: use forward declaration of a function instead of a table.
Clarify Doxygen comment for FF_API_* #defines.
configure: simplify get_version()
Create version.h headers for libraries that lack them
gitignore: Use full path instead of relative path to specify patterns
mpegvideo: remove VLAs
Add XTEA encryption support in libavutil
Add Blowfish encryption support in libavutil
eval: Add the isinf() function and tests for it
flacdec: move lpc filter to flacdsp
flacdec: split off channel decorrelation as flacdsp
avplay: Add an option for not limiting the input buffer size
FATE: add a test for WMA cover art.
FATE: add a test for apetag cover art
...
Conflicts:
.gitignore
configure
ffplay.c
libavcodec/Makefile
libavcodec/error_resilience.c
libavcodec/mpegvideo.c
libavcodec/ratecontrol.c
libavdevice/avdevice.h
libavfilter/Makefile
libavfilter/filtfmts.c
libavfilter/version.h
libavformat/mov.c
libavformat/version.h
libavutil/Makefile
libavutil/avutil.h
libavutil/version.h
libswscale/swscale.h
libswscale/x86/swscale_mmx.c
tests/fate/libavutil.mak
tests/lavfi-regression.sh
tools/graph2dot.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
cosmetics: Consistently use C-style comments with multiple inclusion guards
anm: fix a few Doxygen comments
misc typo and wording fixes
attributes: add av_noreturn
attributes: drop pointless define guards
configure: do not disable av_always_inline with --enable-small
flvdec: initial stream switch support
avplay: fix write on freed memory for rawvideo
snow: remove a VLA used for edge emulation
x86: lavfi: fix gradfun/yadif build with mmx/sse disabled
snow: remove the runs[] VLA.
snow: Check mallocs at init
flacdec: remove redundant setting of avctx->sample_fmt
Conflicts:
ffplay.c
libavcodec/h264.c
libavcodec/snow.c
libavcodec/snow.h
libavcodec/snowdec.c
libavcodec/snowenc.c
libavformat/flvdec.c
libavutil/attributes.h
tools/patcheck
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow to deal with the list file printing only in a single point, thus
simplifying logic, and allow a bit of factorization (no special case
needed when printing the first file name of the list).
This adds the minimum delay needed with the current decoder to
recognize the reorder buffer size for the reference bitstreams.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
asfdec: read attached pictures.
apetag: reindent
apetag: export attached covers as video streams.
apetag: fix the amount of data read from binary tags.
apetag: make sure avio_get_str() doesn't read more than it should.
mov: read itunes cover art.
snow: remove VLA in mc_block()
intfloat: Don't use designated initializers in the public headers
snow: remove a VLA.
doc: Remind devs to check return values, especially for malloc() et al
MS ATC Screen (aka MSS3) decoder
vf_yadif: move x86 init code to x86/yadif.c
vf_gradfun: move x86 init code to x86/gradfun.c
roqvideo: Remove a totally unused dspcontext
smacker: remove some unused code
dsicin: remove dead assignment
aacdec: remove dead assignment
rl2: remove dead assignment
proresenc: make a variable local to the loop where it is used
alsdec: remove dead assignments
Conflicts:
Changelog
doc/developer.texi
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/version.h
libavfilter/gradfun.h
libavfilter/x86/gradfun.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dsputilenc_mmx: split assignment of ff_sse16_sse2 to SSE2 section.
dnxhdenc: add space between function argument type and comment.
x86: fmtconvert: add special asm for float_to_int16_interleave_misc_*
attributes: Add a definition of av_always_inline for MSVC
cmdutils: Pass the actual chosen encoder to filter_codec_opts
os_support: Add fallback definitions for stat flags
os_support: Rename the poll fallback function to ff_poll
network: Check for struct pollfd
os_support: Don't compare a negative number against socket descriptors
os_support: Include all the necessary headers for the win32 open function
x86: vc1: fix and enable optimised loop filter
Conflicts:
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
libavformat/os_support.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Mingw headers provide similar defines already (unconditional #defines,
without any #undef or #ifdef around it), while MSVC doesn't have
them.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fallback function is a non-static function, we shouldn't be
defining non-static functions outside of the proper ff/av prefix
namespaces.
This is especially important for a function like poll, which
other parties (other libraries, or executables linking these
libraries) also might provide similar but incompatible fallbacks for.
Signed-off-by: Martin Storsjö <martin@martin.st>
We need to include winsock2.h here, to make sure we have the
real pollfd struct definition, if one exists, before defining the
fallback poll function.
Signed-off-by: Martin Storsjö <martin@martin.st>
The fds are unsigned integers in the windows definition of struct
sockfds. Due to this, the comparison if (fds[i].fd > n) was always
false.
Signed-off-by: Martin Storsjö <martin@martin.st>
io.h is required for open and _wopen, and fcntl.h is required for
the O_CREAT flag. On mingw, fcntl.h is included by os_support.h (and
the mingw fcntl.h includes io.h), but include it explicitly here
since this implementation requires it.
Also move the #undef open up. open must not be defined to ff_win32_open
while including the headers that declare the open function. On mingw,
this happened in os_support.h before open was redirected.
Signed-off-by: Martin Storsjö <martin@martin.st>
This simplifies usage for segment streaming formats with no global
headers, tipically MPEG 2 transport stream "ts" files.
The seg class duplication is required in order to avoid an infinite loop
in libavformat/utils.c:format_child_next_class().
Patch is addition to my previous patch
(https://lists.ffmpeg.org/pipermail/ffmpeg-cvslog/2012-June/051590.html)
and disables seeking on FIFOs/named pipes by setting
URLContext::is_streamed (same as pipe: protocol does for stdin/stdout pipes)
Fixes Ticket986
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is included for the open/read/write/close functions. On
MSVC, where this header does not exist, the same functions
are provided by io.h, which is already included.
On windows, these functions are provided by io.h. Make sure
io.h is included if it exists, regardless of the setmode
function.
Signed-off-by: Martin Storsjö <martin@martin.st>
unistd.h used to be required for gethostname. On windows, gethostname
is provided by winsock2.h. Now network.h includes both unistd.h and
winsock2.h if they exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
flv: add support for G.711
doc: git: Add checklist with test steps to perform before pushing
flvenc: K&R formatting cosmetics
movenc: Add channel layouts for PCM.
Conflicts:
libavformat/flvenc.c
tests/ref/fate/acodec-pcm-s16be
tests/ref/fate/acodec-pcm-s24be
tests/ref/fate/acodec-pcm-s32be
tests/ref/fate/acodec-pcm-s8
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mss1: validate number of changeable palette entries
mss1: report palette changed when some additional colours were decoded
x86: fft: replace call to memcpy by a loop
udp: Support IGMPv3 source specific multicast and source blocking
dxva2: include dxva.h if found
libm: Provide fallback definitions for isnan() and isinf()
tcp: Pass NULL as hostname to getaddrinfo if the string is empty
tcp: Set AI_PASSIVE when the socket will be used for listening
Conflicts:
configure
libavcodec/mss1.c
libavformat/udp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This gives you the proper v4 or v6 version of the "any address",
allowing receiving connections on any address on the machine.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avconv: add an assert to silence an uninitialized variable warning.
avconv: shut up an uninitialized variable warning.
avfiltergraph: shut up uninitialized variable warning.
af_join: initialize a variable to shut up gcc warning.
amix: fix format specifier for AVFilterLink.sample_rate.
lavfi: make filters less verbose.
mpc8: read APE tags.
lavr: x86: fix ff_conv_fltp_to_flt_6ch function prototypes
libm: provide fallback definition for cbrtf() using powf()
network: Don't redefine error codes if they already exist in errno.h
configure: Check for sys/time.h
network: Include unistd.h from network.h
avconv: don't include vsrc_buffer.h, which doesn't exist anymore
lavfi: reorder AVFilterLink fields.
lavfi: reorder AVFilterContext fields.
lavfi: reorder AVFilter fields.
lavfi: reorder AVFilterBufferRef fields.
lavfi: reorder AVFilterBuffer fields.
Conflicts:
configure
libavcodec/v210dec.h
libavfilter/asrc_anullsrc.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_crop.c
libavfilter/vf_drawbox.c
libavfilter/vf_fade.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vsrc_color.c
libavformat/network.h
libavutil/libm.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since the errno.h values don't match the error codes that winsock
returns, map the winsock error codes to the errno ones, to make
sure explicit checks against AVERROR(x) match.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apparently this include is needed on some systems for building the
poll fallback (for the timeval struct for select?), but it isn't
available on all systems. Thus only include it if it exists.
Signed-off-by: Martin Storsjö <martin@martin.st>
This heaader is required for close() for sockets in network
code. For winsock, the equivalent function is defined in the
winsock2.h header.
This avoids having the HAVE_UNISTD_H in all files dealing with
raw sockets.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
wtv: Check the return value from gmtime
x86: fft: convert sse inline asm to yasm
x86: place some inline asm under #if HAVE_INLINE_ASM
Conflicts:
libavcodec/x86/fft_sse.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
On MSVC, gmtime returns NULL for values outside of their supported
range (and these show up in our fate test). This doesn't seem
to affect the actual fate test result.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
log: Only include unistd.h if configure found it
ape: create audio stream before reading tags.
mov: make a length variable larger.
image2: Add "start_number" private option to the demuxer
image2: Add "start_number" private option to the muxer
avconv: remove a forgotten debugging printf.
avconv: use more descriptive names for hardcoded filters.
avconv: remove redundant handling of async.
doc/filters: fix typo.
h264: use asm cabac reader under a generic condition
Conflicts:
ffmpeg.c
libavformat/img2dec.c
libavformat/img2enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently if a pattern is given we search for up to the fifth file name in
that sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Currently if a pattern is given we look for up to the fifth file name in
the sequence. This option sets that limit to an arbitrary number.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer.
This includes a few lines of trivial code from FFmpeg codebase.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This adds the capability to start counting file number from an arbitrary
integer instead of always starting at 1.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libspeexenc: add supported sample rates and channel layouts.
Replace usleep() calls with av_usleep()
lavu: add av_usleep() function
utvideo: mark interlaced frames as such
utvideo: Fix interlaced prediction for RGB utvideo.
cosmetics: do not use full path for local headers
lavu/file: include unistd.h only when available
configure: check for unistd.h
log: include unistd.h only when needed
lavf: include libavutil/time.h instead of redeclaring av_gettime()
Conflicts:
configure
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/utvideo.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
To ensure the full range of values is still used, also adjust all uses of this function to loop from 0
instead of 1. This way only 60.00 is added and nothing lost.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fix hardcoded tables compililation caused by missing math constants
lavf: Make codec_tag arrays constant
twinvq: give massive struct a name.
lavf, lavu: version bumps and APIchanges for av_gettime() move
lavfi/audio: don't set cur_buf in ff_filter_samples().
lavfi/fifo: add audio version of the fifo filter.
fifo: fix parenthesis placement.
lavfi: rename vf_fifo.c -> fifo.c
lavc: remove stats_in from AVCodecContext options table.
Conflicts:
doc/APIchanges
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/audio.c
libavfilter/fifo.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This muxer supports CODEC_ID_SRT with the timestamps in the packet data
and CODEC_ID_TEXT with the timestamps in the packet fields.
Makes -scodec copy work from Matroska.
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also use ff_neterrno() instead of errno directly (which doesn't work
on windows), for getting the error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
getnameinfo doesn't set errno on failure, it returns an error code,
which should be handled by gai_strerror instead of the normal
strerror.
Signed-off-by: Martin Storsjö <martin@martin.st>
Rtmpt is effectively half duplex - the server can't return any
data unless we send a request (to which the server responds). If
we don't have any data to send currently, and the server didn't
return any data either, wait a little before doing the next request.
This avoids busy looping with idle posts with empty replies, while
waiting for more data from the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new option 'rtmp_flush_interval' that allows specifying the
number of packets to write before sending it off as a HTTP request.
This is mostly relevant for RTMPT - for plain RTMP, it only controls
how often we check the socket for incoming packets, which shouldn't
affect the performance in any noticeable way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This seems to be the correct mode to send, according to the
original RTSP RFC, and matches the method RECORD which is
sent later when starting to send data.
Darwin Streaming Server works fine with either of them.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs
lavr: add x86-optimized functions for mixing 1-to-2 fltp with flt coeffs
Add Dolby/DPLII downmix support to libavresample
vorbisdec: replace div/mod in loop with a counter
fate: vorbis: add 5.1 surround test
rtpenc: Allow requesting H264 RTP packetization mode 0
configure: Sort the library listings in the help text alphabetically
dwt: remove variable-length arrays
RTMPT protocol support
http: Properly handle chunked transfer-encoding for replies to post data
http: Fail reading if the connection has gone away
amr: Mark an array const
amr: More space cleanup
rtpenc: Fix memory leaks in the muxer open function
Conflicts:
Changelog
configure
doc/APIchanges
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This requires all NAL units to fit within single RTP packets. It
doesn't change the actual packetization for packets that fit, but
errors out and gives a helpful hint if the NAL units would have to
be split, and signals the right packetization mode in the SDP.
Signed-off-by: Martin Storsjö <martin@martin.st>
This adds two protocols, but one of them is an internal implementation
detail just used as an abstraction layer/generalization in the code. The
RTMPT protocol implementation uses rtmphttp:// as an alternative to the
tcp:// protocol. This allows moving most of the lower level logic out
from the higher level generic rtmp code.
Signed-off-by: Martin Storsjö <martin@martin.st>
This can happen if doing a new request using the same socket,
but the new request failed, which clears the urlcontext.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add spaces around operators, fix brace placement and whitespace to
match K&R style, vertically align code, remove redundant != 0 and
convert x == 0 into !x, drop useless braces.
Signed-off-by: Martin Storsjö <martin@martin.st>
Defining restrict results - for some compilers - in changing other
uses of the restrict keyword also, e.g. __declspec(restrict) gets
changed to __declspec(__restrict) on MSVC. This causes compilation
failures. Therefore, using a private namespace macro instead is
more reliable and robust.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
flacdec: read attached pictures.
lavf: don't segfault when a NULL filename is passed to avformat_open_input()
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This can easily happen when the caller is using a custom AVIOContext.
Behave as if the filename was an empty string in this case.
CC: libav-stable@libav.org
* qatar/master:
af_resample: fix format modifier in debug string for FF_API_SAMPLERATE64
segment: remove unnecessary <strings.h> include
fate: add snow hpel tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
currently a overflow there should be impossible but future changes to
the code could easily introduce a bug that no longer limits the 2
values sufficiently so better protect it via av_assert.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Avoid C99 variable declarations within for statements.
rtmp: Read and handle incoming packets while writing data
doc: document THREAD_TYPE fate variable
rtpdec: Don't require frames to start with a Mode A packet
avconv: don't try to free threads that were not initialized.
Conflicts:
doc/fate.texi
ffplay.c
libavdevice/dv1394.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure all incoming packets are read and handled (and reacted
to) while sending an FLV stream over RTMP to a server. If there were
enough incoming data to fill the TCP buffers, this could potentially
make things block at unexpected places. For the upcoming RTMPT support,
we need to consume all incoming data before we can send the next
request.
Signed-off-by: Martin Storsjö <martin@martin.st>
While there is no reason for starting a frame with anything else
than a Mode A packet, some senders seem to consistently use Mode B
packets for everything. This fixes depacketization of such streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtmp: Add a new option 'rtmp_buffer', for setting the client buffer time
rtmp: Set the client buffer time to 3s instead of 0.26s
rtmp: Handle server bandwidth packets
rtmp: Display a verbose message when an unknown packet type is received
lavfi/audio: use av_samples_copy() instead of custom code.
configure: add all filters hardcoded into avconv to avconv_deps
avfiltergraph: remove a redundant call to avfilter_get_by_name().
lavfi: allow building without swscale.
build: Do not delete tests/vsynth2 directory, which is no longer created.
lavfi: replace AVFilterContext.input/output_count with nb_inputs/outputs
lavfi: make AVFilterPad opaque after two major bumps.
lavfi: add avfilter_pad_get_type() and avfilter_pad_get_name().
lavfi: make avfilter_get_video_buffer() private on next bump.
jack: update to new latency range API as the old one has been deprecated
rtmp: Tokenize the AMF connection parameters manually instead of using strtok_r
ppc: Rename H.264 optimization template file for consistency.
lavfi: add channelsplit audio filter.
golomb: check remaining bits during unary decoding in get_ur_golomb_jpegls()
sws: fix planar RGB input conversions for 9/10/16 bpp.
Conflicts:
Changelog
configure
doc/APIchanges
ffmpeg.c
libavcodec/golomb.h
libavcodec/v210dec.h
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/asrc_anullsrc.c
libavfilter/audio.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/version.h
libavfilter/vf_frei0r.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/video.h
libavfilter/vsrc_color.c
libavformat/rtmpproto.c
libswscale/input.c
tests/Makefile
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This factorizes existing code into a new function gen_buffer_time(),
which generates the client buffer time message and sends it to the
server.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avfilter: Log an error if avfilter fails to configure a link.
avconv: support only native pthreads.
rtmp: Fix a possible access to invalid memory location when the playpath is too short.
Conflicts:
ffmpeg.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes an issue with a crazy data track starting with a large
negative timestamp.
It could as well be solved in all user apps, but this is looking
attractively simpler ...
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Do not send extension for flv files
rtmp: support connection parameters
doc: Add documentation for the newly added rtmp_* options
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow using connection parameters in order to append arbitrary
AMF data like "B:1 S:authMe O:1 NN:code:1.23 NS:flag:ok O:0" to the
Connect message. You can pass these parameters through the -rtmp_conn
option.
Signed-off-by: Martin Storsjö <martin@martin.st>
Apple softwares seem not to add a tref for the timecode (the next commit
fixes this issue), but at least FFmpeg does.
This can be used to generate a sample that demonstrates the feature:
./ffmpeg -f lavfi -i testsrc \
-f lavfi -i mptestsrc \
-f lavfi -i rgbtestsrc \
-map 0 -map 1 -map 2 \
-metadata:s:0 timecode=00:00:00:12 \
-metadata:s:2 timecode=01:02:12:20 \
-t 10 -y out.mov
./ffprobe out.mov
The timecode metadata being transmitted to the video streams, it can be
kept while transmuxed/transcoded.
* qatar/master:
h264: allow cropping to AVCodecContext.width/height
mov: set AVCodecContext.width/height for h264
iac: generate codec tables as they are supposed to be
indeo4: handle frame type 1 properly
lavu: change versioning script to include all av* prefixed symbols
Conflicts:
libavcodec/h264.c
libavutil/libavutil.v
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
vorbis: Validate that the floor 1 X values contain no duplicates.
avprobe: Identify codec probe failures rather than calling them unsupported codecs.
avformat: Probe codecs at score 0 on buffer exhaustion conditions.
avformat: Factorize codec probing.
Indeo Audio decoder
imc: make IMDCT support stereo output
imc: move channel-specific data into separate context
lavfi: remove request/poll and drawing functions from public API on next bump
lavfi: make avfilter_insert_pad and pals private on next bump.
lavfi: make formats API private on next bump.
avplay: use buffersrc instead of custom input filter.
avtools: move buffer management code from avconv to cmdutils.
avconv: don't use InputStream in the buffer management code.
avconv: fix exiting when max frames is reached.
mpc8: fix maximum bands handling
aacdec: Turn PS off when switching to stereo and turn it to implicit when switching to mono.
Conflicts:
Changelog
cmdutils.h
ffmpeg.c
ffplay.c
ffprobe.c
libavcodec/avcodec.h
libavcodec/mpc8.c
libavcodec/v210dec.h
libavcodec/version.h
libavcodec/vorbisdec.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/buffersrc.c
libavfilter/formats.c
libavfilter/src_movie.c
libavfilter/vf_aspect.c
libavfilter/vf_blackframe.c
libavfilter/vf_boxblur.c
libavfilter/vf_crop.c
libavfilter/vf_cropdetect.c
libavfilter/vf_delogo.c
libavfilter/vf_drawbox.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_fifo.c
libavfilter/vf_format.c
libavfilter/vf_frei0r.c
libavfilter/vf_gradfun.c
libavfilter/vf_hflip.c
libavfilter/vf_hqdn3d.c
libavfilter/vf_libopencv.c
libavfilter/vf_lut.c
libavfilter/vf_overlay.c
libavfilter/vf_pad.c
libavfilter/vf_scale.c
libavfilter/vf_select.c
libavfilter/vf_showinfo.c
libavfilter/vf_transpose.c
libavfilter/vf_unsharp.c
libavfilter/vf_yadif.c
libavfilter/vsrc_color.c
libavfilter/vsrc_testsrc.c
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
movenc: Write chan atom for all audio tracks in mov mode movies.
mpegtsenc: use avio_open_dyn_buf(), zero pointers after freeing
doc/avconv: add some details about the transcoding process.
avidec: make scale and rate unsigned.
avconv: check output stream recording time before each frame returned from filters
avconv: split selecting input file out of transcode().
avconv: split checking for active outputs out of transcode().
avfiltergraph: make some functions static.
Conflicts:
ffmpeg.c
libavfilter/avfiltergraph.c
libavfilter/internal.h
libavformat/mpegtsenc.c
tests/ref/fate/acodec-alac
tests/ref/fate/acodec-pcm-s16be
tests/ref/fate/acodec-pcm-s24be
tests/ref/fate/acodec-pcm-s32be
tests/ref/fate/acodec-pcm-s8
tests/ref/lavf/mov
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some demuxers set a timecode in the format or streams metadata. The
muxers now make use of this metadata instead of a duplicated private
option.
This makes possible transparent copy of the timecode when transmuxing
and transcoding.
-timecode option for MPEG1/2 codec is also renamed to -gop_timecode. The
global ffmpeg -timecode option will set it anyway so no option change
visible for the user.
* qatar/master:
librtmp: return AVERROR_UNKNOWN instead of -1.
librtmp: don't abuse a variable for two unrelated things.
librtmp: add rtmp_app and rtmp_playpath private options.
bmv: add stricter checks for invalid decoded length
avpacket: fix duplicating side data.
flv: support stream text data as onTextData
Conflicts:
libavcodec/bmv.c
libavformat/flvdec.c
libavformat/flvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mpegtsenc: Support LATM packetization for AAC
adtsenc: Don't expose the muxer internals to the rest of lavf
mpegtsenc: use AVFormatContext for AAC packetization
mpegtsenc: use AVERROR() for return codes
Conflicts:
libavformat/adts.h
libavformat/mpegtsenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This adds the avoption mpegts_flags and converts the existing
resend_headers option into a flag, keeping the old option as
fallback for now.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't required any longer, when the mpegts muxer uses it
as a proper chained muxer.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the dependency on adts.c internals, and simplifies
adding other packetization formats.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
http: Add the url_shutdown function for https, too
http: Simplify code by removing a local variable
http: Clear the old URLContext pointer when closed
tcp: Try enabling SO_REUSEADDR when listening
tcp: Check the return values from bind and accept
avisynth: Make sure the filename passed to avisynth is in the right code page
Conflicts:
libavformat/http.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes issues with opening http urls that have authentication
or redirects, introduced in commit e999b641.
Signed-off-by: Martin Storsjö <martin@martin.st>
avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the correct code page that it expects.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
fate: Fix fate-ac3-fixed-encode for pre-ssse3 x86 machines
http: Pass the proper return code of net IO operations
http: Add 'post_data', a new option which sets custom HTTP post data
lavfi: amix: check active input count before calling request_samples
vp8: move block coeff arithcoder on stack.
mp3/ac3 probe: search for PES headers to prevent probing MPEG-PS as MP3.
Conflicts:
libavformat/ac3dec.c
libavformat/mp3dec.c
tests/fate/ac3.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f919cc7df6ab844bc12f89fe7bef4fb915a47725':
fate: fix acodec/vsynth tests for make 3.81
pcm_mpeg: fix number of consumed bytes to include the header.
avfilter: include required header file avfilter.h in video.h
x86: Avoid movs on BUTTERFLYPS when in AVX mode
x86: use new schema for ASM macros
fate: convert codec-regression.sh to makefile rules
fate: allow tests to specify unit size for psnr comparison
fate: teach videogen/rotozoom to output a single raw video stream
http: Add support for reusing the http socket for subsequent requests
http: Add support for using persistent connections
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Such files are currently not supported as the table is used at several points
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
There is basic support for muxing chapter information into the
Apple Quicktime format already, but there are two errors which
prevent correct detection on the player side.
1) A special apple 'text' atom needs to be included inside the
gmhd atom.
2) The *different* 'text' atom inside the 'stsd' atom needs a
proper header.
With these changes, the chapters are now picked up by Apple
players and reported correctly by tools like mediainfo and mp4chaps.
v3 Update: The stub TextSampleEntry creation is moved to where the
chapter track is created so it's now specific to this track.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Introduce ff_http_do_new_request(), a new function which sends a new
HTTP request, reusing the existing connection to the server.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add a new AVOption 'multiple_requests', which indicates if we want
to use persistent connections (ie. Connection: keep-alive).
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avprobe: restore pseudo-INI old style format for compatibility.
avprobe: fix formatting.
log: make colored output more colorful.
rtsp: Check for dynamic payload handlers if no static payload mapping was found
Conflicts:
Changelog
doc/ffprobe.texi
ffprobe.c
libavutil/log.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
opt: Add av_opt_set_bin()
avconv: Display the error returned by avformat_write_header
rtpenc_chain: Return an error code instead of just a plain pointer
rtpenc_chain: Free the URLContext on failure
rtpenc: Expose the ssrc as an avoption
avprobe: display the codec profile in show_stream()
avprobe: fix function prototype
cosmetics: Fix indentation
avprobe: changelog entry
avprobe: update documentation
avprobe: provide JSON output
avprobe: output proper INI format
avprobe: improve formatting
rtmp: fix url parsing
fate: document TARGET_EXEC and its usage
Conflicts:
doc/APIchanges
doc/fate.texi
doc/ffprobe.texi
ffprobe.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Some systems abuse the static payload types 35 or 36 (which
according to IANA are unassigned) for H264.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an URLContext is passed in, its ownership is given to this
function, and is either owned by the returned AVFormatContext
on a successful return, or freed on failure.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
movenc: Don't write the 'wave' atom or its child 'enda' for lpcm audio.
imc: some cosmetics
rtmp: Pass the proper return code in rtmp_handshake
rtmp: Check return codes of net IO operations
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Return a proper error code instead of -1
rtmp: Check malloc calls
rtmp: Check ff_rtmp_packet_create calls
lavfi: add audio mix filter
flvdec: Make sure sample_rate is set to the updated value
tqi: Pass errors from the MB decoder
Conflicts:
Changelog
doc/filters.texi
libavcodec/eatqi.c
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
os_support: Define SHUT_RD, SHUT_WR and SHUT_RDWR on OS/2
http: Add support for reading http POST reply headers
http: Add http_shutdown() for ending writing of posts
tcp: Allow signalling end of reading/writing
avio: Add a function for signalling end of reading/writing
lavfi: fix comment, audio is supported now.
lavfi: fix incorrect comment.
lavfi: remove avfilter_null_* from public API on next bump.
lavfi: remove avfilter_default_* from public API on next bump.
lavfi: deprecate default config_props() callback and refactor avfilter_config_links()
avfiltergraph: smarter sample format selection.
avconv: rename transcode_audio/video to decode_audio/video.
asyncts: reset delta to 0 when it's not used.
x86: lavc: use %if HAVE_AVX guards around AVX functions in yasm code.
dwt: return errors from ff_slice_buffer_init()
Conflicts:
ffmpeg.c
libavfilter/avfilter.c
libavfilter/avfilter.h
libavfilter/formats.c
libavfilter/version.h
libavfilter/vf_blackframe.c
libavfilter/vf_drawtext.c
libavfilter/vf_fade.c
libavfilter/vf_format.c
libavfilter/vf_showinfo.c
libavfilter/video.c
libavfilter/video.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The sample_rate variable is used for checks for audio format
changes at the end of the function.
This fixes cases where the sample rate was set from the codec
id by flv_set_audio_codec (as for nellymoser 8 kHz/16 kHz),
so the value set to last_sample_rate wasn't equal to sample_rate
at this point. This caused the demuxer otherwise reports a spurious
change to 5512 Hz and back to the correct one.
Updating channels in the same way is only done for consistency.
Currently, flv_set_audio_codec doesn't update that value.
Signed-off-by: Martin Storsjö <martin@martin.st>
