Up until now, the length field of most level 1 elements has been written
using eight bytes, although it is known in advance how much space the
content of said elements will take up so that it would be possible to
determine the minimal amount of bytes for the length field. This
commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Given that in both the seekable as well as the non-seekable mode dynamic
buffers are used to write level 1 elements and that now no seeks are
used in the seekable case any more, the two modes can be combined; as a
consequence, the non-seekable mode automatically inherits the ability to
write CRC-32 elements.
There are no differences in case the output is seekable; when it is not
and writing CRC-32 elements is disabled, there can still be minor
differences because before this commit, the EBML ID and length field
were counted towards the cluster size limit; now they no longer are.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now the EBML Header length field has been written with eight
bytes, although the EBML Header is always so small that only one byte
is needed for it. This patch saves seven bytes for every Matroska/Webm
file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The transcode() helper function will already prepend the TARGET_PATH to
the sample path, if its a relative path. This avoids an issue on
Windows, where the relative path check could fail.
write_tmcd allows tmcd track to be created with any mode but in
mov_write_header, index for first tmcd track is only set for modes
MP4 or MOV, causing a crash if tmcd creation is attempted with other
modes.
* commit 'f8df5e2f31a5ba7b30a0e1caaaf5a03c753b3f9b':
tests: Add a convenience function for video-only lavf tests
Merged-by: James Almer <jamrial@gmail.com>
* commit 'a70eac7a9b193e8434b5bed90bd72aa4cb688363':
tests: Convert image2pipe tests to non-legacy test scripts
Merged-by: James Almer <jamrial@gmail.com>
init add three test examples:
1. check no endlist at the end
2. check endlist at the end
3. check hls_list_size 0 full list
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fixes vorbis mp4 audio files, with edit list specified. Since
st->skip_samples is not set in case of vorbis , ffmpeg computes the
start_time as negative.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add tests for upmixing and downmixing with audio channel counts that
have a corresponding default layout and also tests where there is no
default layout.
Update the existing "stereo4" test so it actually outputs stereo like
the other stereo tests. Rename the previous "stereo4" test into
"upmix1".
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
verify that the stco atom is upgraded to co64 when the addition of moov
size to the offsets results in an overflow
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If start_time is not set, ffmpeg takes the duration from the global
movie instead of the per stream duration.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This uses any devices it can find on the host system - on a system with no
hardware device support or in builds with no support included it will do
nothing and pass.
This new optional flag makes it easier to deal with mpegts
samples where the PMT is updated and elementary streams move
to different PIDs in the middle of playback.
Previously, new AVStreams were created per PID, and it was up
to the user to figure out which streams had migrated to a new PID
(by iterating over the list of AVProgram and making guesses), and
switch seamlessly to the new AVStream during playback.
Transcoding or remuxing these streams with ffmpeg on the CLI was
also quite painful, and the user would need to extract each set
of PIDs into a separate file and then stitch them back together.
With this new option, the mpegts demuxer will automatically detect
PMT changes and feed data from the new PID to the original AVStream
that was created for the orignal PID. For mpegts samples with
stream_identifier_descriptor available, the unique ID is used to
merge PIDs together. If the stream id is not available, the demuxer
attempts to map PIDs based on their position within the PMT.
With this change, I am able to playback and transcode/remux these
two samples which previously caused issues:
https://tmm1.s3.amazonaws.com/pmt-version-change.tshttps://kuroko.fushizen.eu/videos/pid_switch_sample.ts
I also have another longer sample in which the PMT changes
repeatedly and ES streams move to different pids three times
during playback:
https://tmm1.s3.amazonaws.com/multiple-pmt-change.ts
Demuxing this sample with the new option shows several new log
messages as the PMT changes are handled:
[mpegts] detected PMT change (program=1, version=3/6, pcr_pid=0xf98/0xfb7)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfb7
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfb8
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfb9
[mpegts] detected PMT change (program=1, version=6/3, pcr_pid=0xfb7/0xf98)
[mpegts] detected PMT change (program=1, version=3/4, pcr_pid=0xf98/0xf9b)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xf9b
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xf9c
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xf9d
[mpegts] detected PMT change (program=1, version=4/5, pcr_pid=0xf9b/0xfa9)
[mpegts] re-using existing video stream 0 (pid=0xf98) for new pid=0xfa9
[mpegts] re-using existing audio stream 1 (pid=0xf99) for new pid=0xfaa
[mpegts] re-using existing audio stream 2 (pid=0xf9a) for new pid=0xfab
[mpegts] detected PMT change (program=1, version=5/6, pcr_pid=0xfa9/0xfb7)
Signed-off-by: Aman Gupta <aman@tmm1.net>
Generates color bar test patterns based on EBU PAL recommendations.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Adds tests for the hue angle and brightness filter parameters.
Renames the existing saturation parameter test for consistency.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The artificial sample file sei-1.h264 contains five frames (IDR P B I B)
and the following SEI message types:
* Buffering period
* Picture timing
* Pan-scan rectangle (display as 4:3)
* User data registered, containing A/53 closed captions (captions match
frame content, including reordering)
* Recovery point (at the I frame)
* Display orientation (identity transformation)
* Mastering display (with arbitrary contents)
* Undefined SEI type 1234 (containing ascending bytes)
Uses the same mechanism as other codecs - conformance test files are
passed through the metadata filter (which, with no options, reads the
input and writes it back) and the output verified to match the input.
- Parse schm atom to get different encryption schemes.
- Allow senc atom to appear in track fragments.
- Allow 16-byte IVs.
- Allow constant IVs (specified in tenc).
- Allow only tenc to specify encryption (i.e. no senc/saiz/saio).
- Use sample descriptor to detect clear fragments.
This doesn't support:
- Different sample descriptor holding different encryption info.
- Only first sample descriptor can be encrypted.
- Encrypted sample groups (i.e. seig).
- Non-'cenc' encryption scheme when using -decryption_key.
Signed-off-by: Jacob Trimble <modmaker@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Some ADTS streams can have multiple ID3 tags between frames. This
change parses all of them, rather than just the first one.
Signed-off-by: Mattias Amnefelt <mattiasa@avm.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On modern x86 systems its around 2x faster. For systems without
FPUs it'll be slower, but our policy is to prefer floating point
implementations and to let users decide what's best (or just not
compile them on systems without FPUs).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Set relevant filter parameters such that the result can easily be
checked with a waveform editor.
In particular, it makes it clear the silence_start is not accurate in
the current code.
test extract color and alpha
with the three main kind of hap frame :
- no snappy compression
- snappy compression and one chunk
- snappy compression and several chunks (16 here)
like the bsf filter need to be used with vtag and encoder edition
also test the information of the target mov for color and alpha
Fixes seek for files with empty edits and files with negative ctts
(dts_shift > 0). Added fate samples and tests.
Signed-off-by: Sasi Inguva <isasi@isasi.mtv.corp.google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These tests cover specific rounding behaviour, to ensure that I don't
introduce any regressions with the rewritten "activate" callback based
fps filter.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It tests a useless profile which sounds no better than regular aac and which
takes extremely long to encoder something. Also it has been behind experimental
flag for as long as it has been supported.
Should be removed altogether sometime in the future.
The twoloop coder sounds decent at low bitrates, however at higher bitrates
it sounds worse than the fast coder (which used to be the old twoloop coder
before October 2015) and needs quite a lot more CPU.
Change the default to fast. It has been well tested and has had little changes
over the years so its been confirmed to be quite stable.
Also change its description (not valid for more than a year) and the
documentation.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The PERSIST_RPARAM_A_RExt_Sony_1 bitstream has an out-of-range value
and has therefore been superseded.
It is otherwise identical, and decodes the same.
Signed-off-by: James Almer <jamrial@gmail.com>
Resulted in valgrind errors due to uninitialized memory.
Also updates fate and makes it use the tron sample result.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Also change note to say that we compare against the officially decoded
samples rather than our own, this was changed long ago.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
After c2a8f0fcbe this can happen on normal edit lists starting on a B-frame.
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '39e16ee2289e4240a82597b97db5541bbbd2b996':
Revert "fate: Skip the checkasm test if CONFIG_STATIC is disabled"
Merged-by: James Almer <jamrial@gmail.com>
Previously alac encoder was used, from a first glance I thought it is bitexact,
but it turns out it is using floating point arithmetic as well, so probably it
is not. Fixes fate failures on mingw32/64.
Signed-off-by: Marton Balint <cus@passwd.hu>
Sets the correct start padding value when an edit list is present.
A new fate test is added, fate-mov-440hz-10ms, to ensure this is
handled correctly.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Reviewed-by: Sasi Inguva <isasi-at-google.com@ffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use the appropriate metadata filter for each codec - in the absence of any
options to modify the stream, the output bitstream should be identical to
the input (though the output file may differ in padding).
All tests use conformance bitstreams, the MPEG-2 streams are newly added
from the conformance test streams
<http://standards.iso.org/ittf/PubliclyAvailableStandards/ISO_IEC_13818-4_2004_Conformance_Testing/Video/>
(cherry picked from commit 3cae7f8b9b)
(cherry picked from commit fbd63170bc)
