start_number option starts the playlist sequence number
(#EXT-X-MEDIA-SEQUENCE) from the specified number. Unless hls_flags
single_file is set, it also specifies starting sequence numbers of
segment and subtitle filenames. Sometimes it is usefull to have unique
starting numbers at each run, but currently it is only achiveable by
setting this parameter manually.
This patch enables to specify start_number source parameter by
introducing hls_start_number_source with 3 possible values:
generic/epoch/datetime. This ensures to set start sequence number
automatically for practically unique numbers. Generic option is the
default and this is the curent behaviour: start_number option value
specifies the start sequence number. (start_number default value is 0)
If hls_start_number_source is set to epoch, then the start number will
be the seconds since epoch (1970-01-01 00:00:00). If set to datetime,
then the start sequence number will be based on the current date/time
value as YYYYmmddHHMMSS. e.g. 20161231235659.
Hls speficication allows 64 bit integers as sequence numbers. This patch
also changes some code where only 32 bit integer values were handled
correctly.
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reason: For some cases, such as 2 or more graphics cards existing, the
default command line may fail because ffmpeg does not open the correct
device node:
ffmpeg -hwaccel qsv -c:v h264_qsv -i test.264 -c:v h264_qsv out.264
Let user choose the proper one by running like below:
ffmpeg -hwaccel qsv -qsv_device /dev/dri/renderD128 -c:v h264_qsv \
-i test.264 -c:v h264_qsv out.264
Signed-off-by: ChaoX A Liu <chaox.a.liu@gmail.com>
Signed-off-by: Huang, Zhengxu <zhengxu.maxwell@gmail.com>
Signed-off-by: Andrew, Zhang <huazh407@gmail.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This decoder can decode all existing SpeedHQ formats (SHQ0–5, 7, and 9),
including correct decoding of the alpha channel.
1080p is decoded in 142 fps on one core of my i7-4600U (2.1 GHz Haswell),
about evenly split between bitstream reader and IDCT. There is currently
no attempt at slice or frame threading, even though the format trivially
supports both.
NewTek very helpfully provided a full set of SHQ samples, as well as
source code for an SHQ2 encoder (not included) and assistance with
understanding some details of the format.
This is what gimp, ImageMagick and FreeImage do and what the
Adobe Photoshop file format specification suggests.
Fixes a sample from ticket #6045.
Reviewed-by: Martin Vignali
when the segments largest duration value is look like 4.000000, the
EXT-X-TARGETDURATION value should equ 4.
it's wrong when hlsenc use ceil, so fix it.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
cid: 1396268
when av_strdup(str) error, the lst need release
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This should make no difference as the value should not be able to be that large
but its more correct this way
Fixes CID1348138
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When allocating stack space with an alignment requirement that is larger
than the current stack alignment we need to store a copy of the original
stack pointer in order to be able to restore it later.
If we chose to use another register for this purpose we should not pick
eax/rax since it can be overwritten as a return value.
Disable B frames when using baseline/constrained baseline profile,
following H.264 spec Annex A.2.1.
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Yi A Wang <yi.a.wang@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
When the command line for children is created, it is assumed that
my_program_name always ends with "ffserver", which doesn't have to
be true if ffserver is called through a symbolic link.
In such a case, it could be that not enough space for "ffmpeg" is
available at the end, leading to a buffer overflow.
One example would be:
$ ln -s /usr/bin/ffserver ~/f; ~/f
As this is only a local buffer overflow, i.e. is based on a weird
program call, this has NO security impact.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The following three commits created a regression by writing initially
invalid mkv headers:
650e17d88b avformat/matroskaenc: write a
CRC32 element on Tags
3bcadf8227 avformat/matroskaenc: write a
CRC32 element on Info
ee888cfbe7 avformat/matroskaenc: postpone
writing the Tracks master
Symptoms:
- You can no longer playback a file that is still processed by ffmpeg,
e.g. VLC fails playback
- You can no longer stream a file to a client while if is still being
processed
- Various diagnosing tools show header errors or incomplete headers
(e.g. ffprobe, mediainfo, mkvalidator)
Note: The symptoms do not apply to completed files or ffmpeg runs that
were interrupted with 'q'
Cause:
The mentioned commits made changes in a way that some header elements
are only partially written in
mkv_write_header, leaving the header in an invalid state. Only in
mkv_write_trailer, these elements
are finished correctly, but that does only occur at the end of the
process.
Regression:
Before these commits were applied, mkv headers have always been valid,
even before completion of ffmpeg.
This has worked reliably over many versions of ffmpeg, to it was an
obvious regression.
Bugtracker:
This issue has been recorded as #5977 which is resolved by this patch
Patch:
The patch adds a new function 'end_ebml_master_crc32_preliminary' that
preliminarily finishes the ebml
element without destroying the buffer. The buffer can be used to update
the ebml element later during
mkv_write_trailer. But most important: mkv_write_header finishes with a
valid mkv header again.
Signed-off-by: James Almer <jamrial@gmail.com>
This commit adds the avio_get_dyn_buf function which allows accessing
the
content of a DynBuffer without destroying it.
This is required in matroskaenc for preliminary writing (correct) mkv
headers.
Context for this change is fixing regression bug #5977.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
looks like there is a bug in commit
1a08758e7c relating to the handling of
ptr in decode_frame after decode_block is called, before this commit
ptr would have been incremented for each line in the data window, now
after the commit it is left at the start of the first included line
rather than the line after the data window then the code sets the
remaining lines to 0 and thus the whole image is over written.
Fix by adjusting ptr to the correct line after decode_block returns
Signed-off-by: Kevin Wheatley <kevin.j.wheatley@gmail.com>
This commit replaces the current inefficient non-power-of-two FFT with a
much faster FFT based on the Prime Factor Algorithm.
Although it is already much faster than the old algorithm without SIMD,
the new algorithm makes use of the already very throughouly SIMD'd power
of two FFT, which improves performance even more across all platforms
which we have SIMD support for.
Most of the work was done by Peter Barfuss, who passed the code to me to
implement into the iMDCT and the current codebase. The code for a
5-point and 15-point FFT was derived from the previous implementation,
although it was optimized and simplified, which will make its future
SIMD easier. The 15-point FFT is currently using 6% of the current
overall decoder overhead.
The FFT can now easily be used as a forward transform by simply not
multiplying the 5-point FFT's imaginary component by -1 (which comes
from the fact that changing the complex exponential's angle by -1 also
changes the output by that) and by multiplying the "theta" angle of the
main exptab by -1. Hence the deliberately left multiplication by -1 at
the end.
FATE passes, and performance reports on other platforms/CPUs are
welcome.
Performance comparisons:
iMDCT, PFA:
101127 decicycles in speed, 32765 runs, 3 skips
iMDCT, Old:
211022 decicycles in speed, 32768 runs, 0 skips
Standalone FFT, 300000 transforms of size 960:
PFA Old FFT kiss_fft libfftw3f
3.659695s, 15.726912s, 13.300789s, 1.182222s
Being only 3x slower than libfftw3f is a big achievement by itself.
There appears to be something capping the performance in the iMDCT side
of things, possibly during the pre-stage reindexing. However, it is
certainly fast enough for now.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Prep work for the next commit, which will add a new FFT algorithm
which makes the iMDCT over 3x faster than it is currently (standalone,
the FFT is with some framesizes over 10x faster).
The new FFT algorithm uses the already thouroughly SIMD'd power of two
FFT which already has SIMD for AArch64, so users of that platform will
still see an improvement.
The previous FFT+SIMD was barely 2.5x faster than the C versions on these
platforms.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
CID: 1398228
Passing null pointer dirname to strlen, which dereferences it.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in get_default_pattern_localtime_fmt the default pattern contains
%Y%m%d%H%I%S but the original intention was %Y%m%d%H%M%S
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
