Skip to parse fields for additional independent substreams and its
associated dependent substreams since libavcodec's E-AC-3 decoder does not
support them yet.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This fixes crashes, where the demuxer could return 0 even
if the returned AVPacket isn't initialized at all. This
could happen if running into EOF or running out of probesize
with non-seekable sources.
Signed-off-by: Martin Storsjö <martin@martin.st>
The new incremental parser doesn't always clear prev_pkt,
however the packet queue is cleared when seeking. Which leads
to a use-after-free.
Verified using Valgrind.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Reduces the amount of upfront data required for cluster parsing
thus decreasing latency on seek and startup.
The change in the seek-lavf_mkv FATE test is due to incremental
parsing no longer reading as much data as the old parser and
thus not having that additional data to generate index entries
based on keyframes. Index entries are added correctly as the
file is parsed.
All FATE tests pass and Chrome has been using this patch for ~6
months without issue.
Currently incremental parsing is not supported for files with
SSA tracks since they require merging packets between clusters.
In this case the code falls back to non-incremental parsing.
Signed-off-by: Aaron Colwell <acolwell@chromium.org>
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The mpegts demuxer reads 5 KB at startup just for discovering
the packet size. Since the default avio buffer size is 32 KB,
the seek back to the start will in most cases be within the
avio buffer, and will in most cases succeed even if the actual
protocol isn't seekable.
This makes the demuxer startup faster/with less data when
reading data from a non-seekable input, by not skipping
the first few KB.
If it fails, don't warn if the protocol isn't seekable, making
it behave as before in the failure case.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fix this warning:
libavformat/aviobuf.c:663:20: warning: assignment discards qualifiers from pointer target type
Although this is a public header, it should remain source and
binary compatible.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If a video track specifies a zero frame rate (invalid but occurs),
this results in a division by zero and subsequent undefined conversion
to integer. Setting the default duration from the frame rate only
if the latter is greater than zero avoids such problems.
Signed-off-by: Mans Rullgard <mans@mansr.com>
This option is the stream identifier to play or to publish.
Sometimes the URL parser cannot determine the correct
playpath automatically, so it must be given explicitly
using this option (ie. -rtmp_playpath).
Signed-off-by: Martin Storsjö <martin@martin.st>
This option is the name of application to connect on the RTMP server.
Sometimes the URL parser cannot determine the app name automatically,
so it must be given explicitly using this option (ie. -rtmp_app).
Signed-off-by: Martin Storsjö <martin@martin.st>
Instead of allocating over the original, free first. MOVStreamContext
is zero initialized so no double free will occur. Same style as other
fixes for the same problem in this file.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
During error conditions matroska_parse_block may exit without
freeing the memory allocated for laces.
Found via valgrind: http://pastebin.com/E54k8QFU
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Share the formerly internal write_packet with the hinter and move the
fragment flush logic to the user facing one since it is not concerned
about movtrack-only streams.
Fixes bug #263
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids exposing a dummy AVStream which won't get any data
and which will make avformat_find_stream_info wait for info about
this stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Searching for packet markers doesn't make sense for this use case,
where packets are fed one at a time to the demuxer.
This fixes playing back streams that have packets not starting
with the 0x82, 0x00, 0x00 marker.
Signed-off-by: Martin Storsjö <martin@martin.st>
It can take a long time before subtitles or data streams show up,
so we shouldn't wait for those before assuming we have all info
for streams.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
The audio codecs property is composed by all values except
SUPPORT_SND_INTEL (0x0008) and SUPPORT_SND_UNUSED (0x0010) which are
unused.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The previous condition of 0 page size was wrong,
that would disable the mechanism for all frames at
a start of a page, thus some keyframes still would not
get their own granule.
The real problem is that header packets must not be flushed,
but they have (and must have) 0 granule and thus would
be detected as keyframes.
Add a separate parameter to mark header packets.
Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
When set, if an Ogg stream buffer has enough data, a page is made
instead of filling maximum-size pages. Using smaller pages results
smaller seek intervals at the expense of higher container overhead.
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Version from vqa header does not dictate which sound chunks may
appear in file.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
This patch allows the user to force flushing of all queued packets
by calling av_interleaved_write_frame() with pkt set to NULL.
Signed-off-by: Jindrich Makovicka <jindrich.makovicka@nangu.tv>
Signed-off-by: Martin Storsjö <martin@martin.st>
This isn't exactly equivalent with the earlier code for codecs
other than H264 and VC1, but those are two only codecs supported
by this codepath anyway, and it simplifies it a bit.
Signed-off-by: Martin Storsjö <martin@martin.st>
Takes encoder delay into account by comparing first the coded page
duration with the calculated page duration. Handles last packet duration
if needed, also by comparing coded duration with calculated duration.
Also does better handling of timestamp generation for packets in the
first page for streamed ogg files where the start time is not
necessarily zero.
The other fragmentation options (frag_duration, frag_size and
frag_keyframe) are combined with OR, cutting fragments at the
first of the conditions being fulfilled.
Signed-off-by: Martin Storsjö <martin@martin.st>
Make the muxers/demuxers that use the field handle the default
-1 in the same way as 0.
This allows distinguishing an intentionally set 0 from the default
value where the user hasn't set it.
Signed-off-by: Martin Storsjö <martin@martin.st>
An obscure Japanese lossless video codec, originally intended
for use with a remote desktop application.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
The private option has not been part of any release yet (and
it is only of use in quite rare cases), so just remove it instead
of keeping it with deprecation warnings.
Signed-off-by: Martin Storsjö <martin@martin.st>
This was forgotten in the transition from av_open_input_file to
avformat_open_input, see 603b8bc2a1.
This doesn't change anything for the default case where the
option isn't set, since PROBE_BUF_MAX is 1048576 (which was
used as max probe size earlier) while the default value for
the probesize option is 5000000, which for the probe function
is clipped to PROBE_BUF_MAX anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
Allow up to 4 retries for normal requests, where both the
proxy and the target server might need to authenticate.
Signed-off-by: Martin Storsjö <martin@martin.st>
These commands are sent asynchronously, not waiting for the reply.
This reply is parsed later by ff_rtsp_tcp_read_packet or
udp_read_packet. If the reply indicates that we used stale
authentication and need to use a new nonce, resend a new keepalive
command immediately.
This is the only request sent asynchronously, so currently there's
no other command that needs to be resent in the same way.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes sending back RTCP RR packets if receiving RTP over
multicast.
If the multicast stream is sent on demand (set up and signalled
via RTSP), the sender might depend on getting RTCP RR packets
knowing that there are listeners, otherwise the stream can be
closed after a certain timeout.
This fixes receiving RTSP streams over multicast on unix, from
certain Axis cameras.
Signed-off-by: Martin Storsjö <martin@martin.st>
When this code was added in 36b532815c, the new code was added
between the existing comment and the existing line of code, making
the old comment seem to refer to the new code. This makes it read
correctly.
Signed-off-by: Martin Storsjö <martin@martin.st>
The ogg decoder wasn't padding the input buffer with the appropriate
FF_INPUT_BUFFER_PADDING_SIZE bytes. Which led to uninitialized reads in
various pieces of parsing code when they thought they had more data than
they actually did.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Also, do not keep trying to find and open a decoder in try_decode_frame() if
we already tried and failed once.
Fixes always searching until max_analyze_duration in
avformat_find_stream_info() when demuxing codecs without a decoder.
Also, do not give AVCodecContext.frame_size priority for muxing.
Updated 2 FATE references:
dxa-feeble - adds 1 audio frame that is still within 2 seconds as specified
by -t 2 in the FATE test
wmv8-drm-nodec - durations are not needed. previously they were estimated
using the packet size and average bit rate.
It is unnecessary. Also, for some codecs we're reading more than 1 frame per
packet. Instead we use a private context variable to calculate the bit rate,
stream duration, and packet durations.
Updated FATE seek test, which has slightly different timestamps due to a
more accurate bit rate calculation.
For encoding, frame_size is not a reliable indicator of packet duration.
Also, we don't want to have to force the demuxer to find frame_size for
stream copy to work.
Split off packet parsing into a separate function. Parse full packets at
once and store them in a queue, eliminating the need for tracking
parsing state in AVStream.
The horrible unreadable loop in read_frame_internal() now isn't weirdly
ordered and doesn't contain evil gotos, so it should be much easier to
understand.
compute_pkt_fields() now invents slightly different timestamps for two
raw vc1 tests, due to has_b_frames being set a bit later. They shouldn't
be more wrong (or right) than previous ones.
Make packet buffer a parameter, don't hardcode it to be
AVFormatContext.packet_buffer.
Also move the function higher in the file, since it will be called from
read_frame_internal().
The time base is 1 / sample_rate, not 90000.
Several more codecs encode the sample count in the first 4 bytes of the
chunk, so we set the durations accordingly. Also, we can set start_time and
packet duration instead of keeping track of the sample count in the demuxer.
Fixes timestamp calculation.
The FATE reference is updated because timestamp calculations are now more
accurate. Previous timestamps were based on average bit rate.
This allows it to be used with get_bits without the thread of overreads.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
The container has no timestamps and the framerate isn't stored in the
data either.
The decoder sets codec timebase to experimentally found value 1/15. Do
the same for the demuxer too, it should at least be better than the
default 1/90000.
The fields "Number of Bytes" and "Number of Frames" are mixed up. "Bytes"
come first, "Frames" behind.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Alex Converse <alex.converse@gmail.com>
This makes the packetization spec compliant for cases where one single
GOB doesn't fit into an RTP packet.
Signed-off-by: Martin Storsjö <martin@martin.st>
This fixes cases where the user had specified one desired MTU
via an option, and the protocol indicates another one.
Signed-off-by: Martin Storsjö <martin@martin.st>
Frame sizes in ID3v2.3 are not synchsafe, they are simply 32be numbers.
In practice this bug is not noticeable unless the frame size takes more
than 7 bits (which is almost never for text frames).
Seeking back on EOF will reset the EOF flag, causing us to re-enter
the loop to find the next marker in the ASF file, thus potentially
causing an infinite loop.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Provide a way to wrap around the segment index so pseudostreaming
live through a web server and html5 browser is simpler.
Also ensure that 0 (disable) is a valid value across the options
providing wrap around.
