Fixes Ticket4664
The changed fate tests lack red/blue shades and thus look correct
either way
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '82e6ac85ff9aa7631b8c01521b3d6b5ca0bc8014':
checkasm: test all architectures with optimisations
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6cc4d3e9a982e926494f4b919d9733fe29774acf':
checkasm: exit with status 0 instead of 1 if there are no tests to perform
Merged-by: Michael Niedermayer <michael@niedermayer.cc>
It provides the following features:
* verify correctness by comparing output to the C version.
* detect failure to save and restore clobbered callee-saved registers.
* detect 32-bit parameters being used as if they were 64-bit in x86-64
(the upper halves are not guaranteed to be zero - but in practice
they very often are, which makes those bugs hard to spot otherwise).
* easy benchmarking.
Compile by running 'make checkasm'.
Execute by running 'tests/checkasm/checkasm'.
Optional arguments are '--bench' to run benchmarks for all functions,
'--bench=<pattern>' to run benchmarks for all functions that starts with
<pattern>, and '<integer>' to seed the PRNG for reproducible results.
Contains unit tests for most h264pred functions to get started, more tests
can be added afterwards using those as a reference.
Loosely based on code from x264. Currently only supports x86 and x86-64,
but additional architectures shouldn't be too much of an obstacle to add.
Note that functions with floating point parameters or floating point
return values are not supported. Some compiler-specific features or
preprocessor hacks would likely be required to add support for that.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
* commit '02b7c630875c0bc63cee5ec597aa33baf9bf4e20':
h261: Signal freeze picture release for intra frames
Conflicts:
tests/ref/vsynth/vsynth1-h261
tests/ref/vsynth/vsynth2-h261
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Freeze picture release should be set to 1 when we're responding to a
fast update request. For simplicity we set it for all intra frames,
including those that starts a GOP.
Fixes issue where Tandberg MXP1700 does not recover from packet loss
state since it's waiting for the freeze picture relase indication.
Bug-Id: 873
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Ref H.261 recommendation section 4.2.1.3, setting the still image flag
to 1 disables still image mode. Some decoders require this in order to
decode the bitstream as normal video.
Fixes H.261 calls to Cisco E20.
Also, reserved (aka spare) bits should be set to 1 unless specified
otherwise.
Bug-Id: 872
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This change fixes a bug where a test that required a sample was being included
in the suite when SAMPLES was not set. It also improves the consistency of
variable names relating to the API tests.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'f91fe24e9bd6912c29bbb03d8afe878e045f9721':
g2meet: force simple idct for identical results over all fate configs
Conflicts:
tests/ref/fate/g2m3
tests/ref/fate/g2m4
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4d1229dabf7a7e3b6a7b326afd79102256c3b008':
g2meet: Add FATE tests for all three G2M variants
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Most of the fate-dds-* and fate-txd-* tests already
output into the same pixel format regardless of
platform endianness, so there's no need to force
conversion to another format.
This fixes the tests fate-txd-16bpp, fate-txd-odd,
fate-dds-rgb16, fate-dds-rgb24 and fate-dds-xrgb on
big endian, where the tests seem to fail due to issues
with certain conversion codepaths in swscale.
Those conversion codepaths should of course be fixed, but
the individual decoder tests should use as little extra
conversion steps as possible.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '3ad678a85b96fc5fecd60e3d3a31ca5ffc89d67f':
fate: Update ac3 test to the new request_channel_layout option
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '441e8ae5efd681055e5af6f4317fb60110de9dd0':
FATE: drop the last truncated frame from the wmapro tests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd3ea79e8a65ddad4da11813bb43c46701295f68c':
FATE: drop the last truncated frame from the wma lossless test
Conflicts:
tests/fate/lossless-audio.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The old one is the result of the reverse engineering and guesswork.
The new one has been written following the now-available specification.
This work is part of Outreach Program for Women Summer 2014 activities
for the Libav project.
The fate references had to be changed because the old demuxer truncates
the last frame in some cases, the new one handles it properly.
The seek-test reference is changed because seeking works differently
in the new demuxer. When seeking, the packet is not read from the stream
directly, but it is rather constructed by the demuxer. That is why
position is -1 now in the reference.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The intention of this change is to allow separation of API tests from the
existing tests, and also to have a place for the API test source/executable
files so they're not mixed in with the actual library code.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Result differs in pkt_duration and time_base.den for some reason.
Right now it tests only one example (adjusted to match the output).
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Ideally this should be discarded by the demuxer but this is not
possible without fully parsing which would be then very similar
to this. The current ID3v1 discard code in the demuxer does not work
and will be removed in a subsequent commit
The discard code could be adjusted if needed to also discard tags at
other locations than the end or to limit this possibly to input
from the mp3 demuxer or even to move the discarding to the
decoder.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c0b105756f61d253bdabcc2bb49453a2557e7c3b':
txd: Use the TextureDSP module for decoding
Conflicts:
configure
libavcodec/s3tc.c
libavcodec/s3tc.h
libavcodec/txd.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Using the internal DXTC routines brings support for non multiple of 4
textures. A new test is added to cover this feature. Hashes differ
since the decoding algorithm is different, though no visual changes
have been spotted.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
thats how the specification defines it, this also improves numerical
accuracy of the integer wavelet implementation. It otherwise should
be equivalent, in case of overflows this can be reverted.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c060d046aa2f89c0e601a2dcfbce53f0e36cf498':
af_resample: Set the number of samples in the last frame
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '6ec688e1bc76dd93151cbca1c340162ae4b10d77':
mp3: enable packed main_data decoding in MP4
Conflicts:
libavcodec/mpegaudiodec_template.c
Only the parts needed to support the available sample are merged
the remaining error checks are left in place
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Even if the jpeg2000 spec uses a wrong value this does not
make mathematics work this way, also this has been corrected in the 2004
version AFAIK
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
or if no rematrix and no resampling is performed and the input is 16bit
note reampling and rematrix itself always use more than 16bit internally
the "internal" sampling format is the format between these steps
Its unlikely the difference from this commit is audible in any case
unless there is some bug either before or after the change.
but multiple people prefer this and it slightly improves the precission
of computations.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is almost certainly closer to how the actual Nintendo players work,
and fixes some output pops in files with blank ADPC/SEEK tables (like
those from brawlcustommusic).
14496-3 suggests packing main_data of MP3 that is usually scattered
into multiple frames due to bit reservoir.
However, after packing main_data into a access unit, bitrate index
in the MPEG audio frame header doesn't match with actual frame size.
In order to accept this, this patch removes unnecessary frame size
checking on mp3 decoder.
Also, mov demuxer was changed to use MP3 parser only on special cases
(QT MOV with specific sample description) to avoid re-packetizing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
* commit '063f7467e4d14ab7fe01b2845dab60cc75df8b53':
rtmpdh: Add fate test for the DH handshake routine
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Previous version Reviewed-by: tim nicholson <nichot20@yahoo.com>
Previous version Reviewed-by: Tomas Härdin <tomas.hardin@codemill.se>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The positioning was completely wrong. First, the coordinates are
expressed in ASS playback resolution (which is by default 384x288).
Secondly, the coordinates define a drawing rectangle, not a moving area.
The previous code was making subtitles move from a random position to
another random position.
Here we rescale assuming the video resolution is a DVD one (720x480). We
can't really do anything better so far, but since this positioning
information is often from a DVD rip we can consider them relatively
safe.
No real difference in quality, its a bit slower for the same dia_size as more
vectors are searched for the same dia_size
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AV_PIX_FMT_GRAY8/16 are considered YUV formats, and the color_range is
not set - so the API user will have to assume limitted range. (Unless
the API user adds a special-case for the PNG decoder.)
Just export the correct range - full range.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd81fb63d87692765c004c19934b49427df434a07':
fate: Add a PICT test
Conflicts:
tests/fate/image.mak
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Remove the direct profile from UTCTiming element. Per DASH spec,
direct profile value should be the time at which the request was
made to the server and not the time at which the manifest was
written. So ffmpeg cannot write this value. This patch removes
the direct profile and write the UTCTiming element with the http
profile only if a URL is passed as a parameter. Update the fate
test to reflect this change.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This will test properly CRLF with make fate, make fate-subtitles and any
make fate-sub-* test. Before this commit, the rawdiff was triggered only
by make fate-subtitles.
Also make sure fate-sub-* only match the tests relying on fmtstdout
command, to at least avoid failing on MingW. See
https://ffmpeg.org/pipermail/ffmpeg-devel/2015-April/172395.html
failure to calculate psnr should not result in tiny_psnr returning success
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
