By default don't use the color properties from input frame as output
frame properties when performing HDR to SDR conversion
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Fixes a regression due to the fact that the colorspace filter does
not use the new API introduced by 8c7934f73a.
The scale filter uses it since 45e09a3041, and the setparams
filter since 3bf80df3cc.
Example:
ffprobe -f lavfi yuvtestsrc,setparams=color_primaries=bt470bg:color_trc=
bt470bg:colorspace=bt470bg,colorspace=bt709:range=tv,scale,showinfo
Before:
color_range:unknown color_space:bt470bg ...
After:
color_range:tv color_space:bt709 ...
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Signed-off-by: Niklas Haas <git@haasn.dev>
Overriding unknown layouts with the negotiated layout is OK, but the number of
channels should match with what was negotiated.
Signed-off-by: Marton Balint <cus@passwd.hu>
GCC 9-13 do not emit warnings for this at all optimization
levels even when -Wmaybe-uninitialized is not disabled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This filter only had an AVClass and empty options because up until
recently, avfilter_init_str() errored out when options were provided
for a filter without an AVClass. But setting (generic) options is
necessary to take advantage of timeline support. So with
avfilter_init_str() fixed, the AVClass and the options can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This filter only had an AVClass and empty options because up until
recently, avfilter_init_str() errored out when options were provided
for a filter without an AVClass. But setting (generic) options is
necessary to take advantage of timeline support. So with
avfilter_init_str() fixed, the AVClass and the options can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This filter only had an AVClass and empty options because up until
recently, avfilter_init_str() errored out when options were provided
for a filter without an AVClass. But setting (generic) options is
necessary to take advantage of timeline support. So with
avfilter_init_str() fixed, the AVClass and the options can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This filter only had an AVClass and empty options because up until
recently, avfilter_init_str() errored out when options were provided
for a filter without an AVClass. But setting (generic) options is
necessary to take advantage of timeline support. So with
avfilter_init_str() fixed, the AVClass and the options can be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The documentation for filter arguments states that short options must
precede long options (i.e. those of the form key=value). Yet if
process_options() encounters arguments not abiding by this, it simply
treats short options after a long option as if it were parsing short
options for the first time. In particular, it overwrites options already
set earlier, possibly via other short options. This is not how it is
intended (as a comment in the code indicates).
This commit modifies the code to reject further shorthand options
after a long option has been encountered. After all, avfilter_init_str()
errors out upon unrecognized options, so it is intended to be picky.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also update the checks that guard against inserting
a new enum entry in the middle of a range.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes ffplay playback of unknown layouts, when SDL directly supports the audio
format, such as:
ffplay -f lavfi anullsrc=cl=2C,aformat=s16
Without the patch, "Channel layout change is not supported" errors are
generated because buffersrc (unknown 2 channel) and buffersink (stereo)
negotiated a stereo layout, but the stereo layout was never stored in the
BufferSourceContext.
This fixes a regression of 7251f90972, but this
is more of a regression of the avfilter channel layout conversion
(1f96db959c).
Signed-off-by: Marton Balint <cus@passwd.hu>
Doing this with REDUCE_FORMATS() instead of swap_color_*() is not only
shorter, but more importantly comes with the benefit of being done
inside a loop, allowing us to correctly propagate complex graphs
involving multiple conversion filters (e.g. -vf scale,zscale).
The latter family of swapping functions is only used to settle the
best *remaining* entry if no exact match was found, and as such was
never the correct solution to YUV colorspaces, which only care about
exact matches.
- Properly initialize all the mappings to -1 by default.
- Make sure every output channel is assigned exactly once
- Autodetect a native layout when only native channels are present
- Always honor the user specified layout, but make sure the mapping is
compatible with it
The last item is a regression from 4af412be71.
Signed-off-by: Marton Balint <cus@passwd.hu>
In this case in_channel_idx was never set and the default 0 was used.
Suprisingly no one noticed that the respective fate test output was wrong.
Signed-off-by: Marton Balint <cus@passwd.hu>
PyTorch is an open source machine learning framework that accelerates
the path from research prototyping to production deployment. Official
website: https://pytorch.org/. We call the C++ library of PyTorch as
LibTorch, the same below.
To build FFmpeg with LibTorch, please take following steps as
reference:
1. download LibTorch C++ library in
https://pytorch.org/get-started/locally/,
please select C++/Java for language, and other options as your need.
Please download cxx11 ABI version:
(libtorch-cxx11-abi-shared-with-deps-*.zip).
2. unzip the file to your own dir, with command
unzip libtorch-shared-with-deps-latest.zip -d your_dir
3. export libtorch_root/libtorch/include and
libtorch_root/libtorch/include/torch/csrc/api/include to $PATH
export libtorch_root/libtorch/lib/ to $LD_LIBRARY_PATH
4. config FFmpeg with ../configure --enable-libtorch \
--extra-cflag=-I/libtorch_root/libtorch/include \
--extra-cflag=-I/libtorch_root/libtorch/include/torch/csrc/api/include \
--extra-ldflags=-L/libtorch_root/libtorch/lib/
5. make
To run FFmpeg DNN inference with LibTorch backend:
./ffmpeg -i input.jpg -vf \
dnn_processing=dnn_backend=torch:model=LibTorch_model.pt -y output.jpg
The LibTorch_model.pt can be generated by Python with torch.jit.script()
api. https://pytorch.org/tutorials/advanced/cpp_export.html. This is
pytorch official guide about how to convert and load torchscript model.
Please note, torch.jit.trace() is not recommanded, since it does
not support ambiguous input size.
Signed-off-by: Ting Fu <ting.fu@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Reviewed-by: Guo Yejun <yejun.guo@intel.com>
All versions of MSVC that support C11 (namely >= v19.27)
also support the restrict keyword, therefore av_restrict
is no longer necessary since 75697836b1.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
At present, consume_update evaluates timeline state on all links for
a multi-input filter. This can lead to the filter being incorrectly
en/dis-abled when evaluation on a frame on a secondary link leads to
a different result than the frame on the current main link next in
line for processing.
In some builds, the following object files could be left behind
after make clean:
./libavfilter/metal/utils.o
./libavfilter/metal/vf_yadif_videotoolbox.metallib.o
./libavcodec/x86/h26x/h2656dsp.o
./libavcodec/neon/mpegvideo.o
./ffbuild/bin2c_host.o
Fixes: http://trac.ffmpeg.org/ticket/10895
Signed-off-by: Martin Storsjö <martin@martin.st>
src/libavfilter/internal.h:255:45: note: passing argument to parameter 'filter' here
int ff_filter_config_links(AVFilterContext *filter);
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
