if the http server don't response the http command,
then the thread will be blocked and never be interrupted.
Reported-by: yinyunjiang <yinyunjiang1991@qq.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current implementation of finding duplicate segment filenames may fail
if use_localtime_mkdir and use_localtime are in effect and
segment_filename option expression contains subdirectories with
date/time specifiers. This patch fixes this false behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in hlcenc.c, in the hls_write_header() function the default format
string for strftime() function contains %s specifier when use_localtime
is true. This %s specifier will insert the seconds since EPOCH. But %s
is not available on all system/environment. This patch check %s
availabilty at runtine and alter the default format string if necessary.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
In ff_index_search_timestamp(), if b == num_entries,
m == num_entries - 1, and entries[m].flags & AVINDEX_DISCARD_FRAME is
true, then the search for the next non-discarded packet could access
entries[nb_entries], exceeding its bounds. This change adds a protection
against that scenario. Reference: https://crbug.com/666770
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When delete_segments hls_flag is specified, deleting old segments may
fail in certain cases when use_localtime_mkdir is in effect and
hls_segment_filename expression contains subdirs. This patch fixes this
behaviour.
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
in filenames
Putting date/time values into segment filenames is very usefull.
But to produce non-conflicting segment filenames with -use_localtime
option with date/time
values in hls_segment_filename option, sometimes is not enough.
Like in cases when multiple segments produced in the same second.
But hlsenc currently does not make possible to use segment index (%d) at
the
same time whe use_localtime is in effect, due to identifier conflict.
This patch makes possible to use strftime identifiers and still put
segment index (%d) at same time in segment filenames by introducing
second_level_segment_index flag. When -use_localtime is active,
identifier %d is for month day index, so %%d is the segment index
placeholder. This enhanced behaviour only exists when new
second_level_segment_index flag is specified.
For instance putting 'segment_%Y%m%d%H%M%S_%%05d.ts' value into
-hls_segment_filename option and specifing -hls_flags
second_level_segment_index and -use_localtime 1, may produce segment
filename as 'segment_20161230235758_00002.ts'
An example:
ffmpeg -loglevel info -y -f lavfi -i color=c=red:size=640x480:r=25 -f
lavfi -i anullsrc=r=44100:cl=stereo -c:v mpeg2video -g 25 -acodec aac
-cutoff 20000 -ac 2 -ar 44100 -ab 192k -f hls -hls_time 3 -hls_list_size
5 -hls_flags delete_segments+second_level_segment_index -use_localtime 1
-hls_segment_filename "segment_%Y%m%d%H%M%S_%%05d.ts" stream.m3u8
will produce segments filenames:
....
segment_20161227005902_00013.ts
segment_20161227005902_00014.ts
segment_20161227005902_00015.ts
segment_20161227005903_00016.ts
segment_20161227005903_00017.ts
segment_20161227005903_00018.ts
segment_20161227005903_00019.ts
segment_20161227005903_00020.ts
....
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
initial_prog_date_time shouldn't be adjusted when deleting segments
from disk, but rather when segments are removed from the playlist.
Signed-off-by: Jesper Ek <deadbeef84@gmail.com>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
ffmpeg-devel
with use_localtime parameter hlsenc may produce identical filenames for
different but still existing segments. It happens when
hls_segment_filename contains
syntacticaly correct but inadequate format parameters. Currently there
is no any log message when such a situaton occurs but these cases should
be avoided in most times. This patch generate warning log messages in
these cases.
ticketID: #6043
Signed-off-by: Bela Bodecs <bodecsb@vivanet.hu>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Fixes pts gaps when reading AVI files > 256GiB generated by FFmpeg.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes it possible to decode motion jpeg 2000
encoded in a transport stream without a correct PMT/PAT.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Clang is not able to eliminate the reference to ff_spdif_probe() when
there is a goto target in the same block and optimization is disabled.
This fixes the following build failure on OS X:
./configure --disable-everything --disable-doc \
--enable-decoder=pcm_s16le --enable-demuxer=wav \
--enable-protocol=file --disable-optimizations --cc=clang
make
...
Undefined symbols for architecture x86_64:
"_ff_spdif_probe", referenced from:
_set_spdif in libavformat.a(wavdec.o)
ld: symbol(s) not found for architecture x86_64
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
MPEG Audio frame header must be 4 bytes. If we fail to read
4 bytes bail early to avoid Use-of-uninitialized-value msan error.
Reference https://crbug.com/666874.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The bit_rate field has type int64_t since commit
7404f3bdb9.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes CVE-2016-9561, Note the security relevance of this is disputed as
running out of memory can happen with valid files
Suggested-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The demuxer doesn't fill the defaults if the master isn't present.
This results in codecpar->color_space being set with a value of
zero (RGB) on such files.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes: part of 670190.ogg
Fixes integer overflow
Found-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
av_find_stream_info() was deprecated by avformat_find_stream_info(),
correct the warning message in the avformat_find_stream_info() and
comments in the avformat.h
Signed-off-by: Jun Zhao <jun.zhao@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array access
Found-by: Paul Cher <paulcher@icloud.com>
Reviewed-by: Paul Cher <paulcher@icloud.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is a bit messy as codecar does not support AVOptions so we need
to use AVCodecContext where AVOptions are required and copy back and forth.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The speex specification does not seem to restrict these values, thus
the limits where choosen so as to avoid multiplicative overflow
Fixes undefined behavior
Fixes: 635422.ogg
Found-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This would be simpler if codecpar supported AVOptions
modern ffserver should be unaffected by this, older ffserver which required the
muxer to directly access the encoder could have issues with this, but this
direct access is just wrong and unsafe
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This accesses the private encoder context, it should not be used by
the current ffserver it may affect old ffserver versions but i believe
there is consens that accessing the private encoder context from the muxer
is completely wrong.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Note, this temporarly drops the ability to set ffmpeg encoder debug and flags2 via ffserver.conf
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts parts of c16582579b. The hard
coded 30 seconds are a lot, and finishing the seek can takes several
seconds when the source is on a network share. Remove this code
entirely, because it does more bad than good.
(Commit message provided by committer, based on the original messages
by the patch author.)
Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Using the decode interrupt feature of ffmpeg may cause crashes by
accessing previously freed pointers in matroska_read_close.
To prevent this reset nb_elem to zero after freeing the elements,
because ffmpeg normally tests for nb_elem.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The code calls av_new_packet a few lines above and the allocated memory
has to be freed in case of an error.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
mythtv have problem with non-seekable dont write duration and filesize
and there have problem with some other server and player with 0 value
duation and filesize.
So add a flv flags to fix the ticket and make a choose for users.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Otherwise the codec context and codecpar might disagree on the codec id,
triggering asserts in av_parser_parse2.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes division by zero crashes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Metadata streams have priv_data set to NULL.
Reviewed-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Based on the draft spec at https://git.xiph.org/?p=flac.git;a=blob;f=doc/isoflac.txt
'-strict experimental' is required to create files in this format.
Signed-off-by: Matthew Gregan <kinetik@flim.org>
Signed-off-by: James Almer <jamrial@gmail.com>
FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
A negative extradata size for example gets passed to memcpy in
avcodec_parameters_from_context causing a segmentation fault.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This makes av_stream_add_side_data() consistent with av_packet_add_side_data().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Functionally similar to av_packet_add_side_data(). Allows the use of an
already allocated buffer as stream side data.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
when parsing keyframe index metadata, list the message by trace log
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit e0c6b32046.
Said commit changed the behavior of the demuxer and decoder in a non
backwards compatible way.
Demuxers should make extradata available at init if possible, and send
new extradata as side data within a packet if needed.
A better fix for the remuxing crash will follow.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes division by 0
This is similar to how avg_frame_rate is checked elsewhere
Fixes: 6d24add0455f41b1b45b7ba615cd46f3/asan_generic_dc34c3_5480_0a2ef411cae999b9871ed71a2e481b71.mov
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '4f7723cb3b913c577842a5bb088c804ddacac8df':
movenc: Add an option for skipping writing the mfra/tfra/mfro trailer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '029cf99c5166b36f33381cd8ebfa5f1f1f463d1f':
mov: Save number of stsd elements after stream extradata allocation
Mostly noop, see 8b43ee4054
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '785c25443b56adb6dbbb78d68cccbd9bd4a42e05':
movenc: Apply offsets on timestamps when peeking into interleaving queues
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
This prevents a division by zero in read_packet.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes valgrind warning about "Conditional jump or move depends on uninitialised value(s)"
Reviewed-by: Andreas Cadhalpun <andreas.cadhalpun@googlemail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes https://trac.ffmpeg.org/ticket/5940#ticket
Reviewed-by: Michael Niedermayer <<michael@niedermayer.cc>>
Signed-off-by: Robert Nagy <ronag89@gmail.com>
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
It can read less than the requested amount, in which case buf contains
uninitialized data, causing problems like segmentation faults later on.
Also make sure that image->size is positive, so that it can't match a
negative error code.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add keyframe index metadata
Used to facilitate seeking; particularly for HTTP pseudo streaming.
1. read live streaming or file by sequence
2. if use add_keyframe_index option, add a mark flag at the position,
use to insert new context at the last step.
3. add the keyframes *offset* and *timestamp* into a list
4. if use add_keyframe_index option, shift the metadata data from
mark flag offset
5. insert the keyframes *offset* and *timestamp* from the list by
sequence
6. free the list
7. end.
Add FATE test case;
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The code assumes that s->streams[0] is valid.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If the value is negative then it means padding at the start of the packet
instead of at the end.
Based on a patch by Hendrik Leppkes.
Reviewed-by: James Zern <jzern-at-google.com@ffmpeg.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Use the hls_close function to reduce code duplication.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This is needed for the following commit.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Commit 04964ac311 ("avformat/hls: Fix missing streams in some
cases with MPEG TS") caused a regression where subdemuxer streams that
use probing (e.g. dts/eac3/mp2 in mpegts) no longer get probed properly.
This is because the codec parameters from the subdemuxer stream, once
probed, are not passed on to the main stream.
Fix that by updating the codec parameters if the codec id changes.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
AVCodecParameters.sample_rate is a signed integer, so
XMVAudioPacket.sample_rate should be, too.
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Also check for errors from avpriv_mpeg4audio_get_config in
ff_mp4_read_dec_config_descr.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
fate-aac-al07_96 fails if sample_rate == 0 is rejected in
ff_mov_read_stsd_entries.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
A negative sample rate doesn't make sense and triggers assertions in
av_rescale_rnd.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fixes: error: dereferencing pointer to incomplete type
Tested-by: Dave Yeo <daveryeo@telus.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is required since some programs are not able to correctly recognize
the metadata. See H.222, 2.6.58 Metadata pointer descriptor.
putstr8() is modified in order to allow to skip writing the string
length.
This should be more useful for users since numerical values for channel
layout can be confusing and unintuitive.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Metadata streams have priv_data set to NULL.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
When ffplay is used to play from the RTSP URL that serves 24 bit audio
content, ffplay fails to recognize the audio codec format. The attached
patch adds support for playing 24 bit audio content over RTSP by
defining a dynamic payload handler for "L24".
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The bitstream filters do not work with merged in side data
This leaves the input packet split if it is being split.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This reverts commit fba2a8a254.
The changes were right for av_write_frame() but not for av_interleaved_write_frame().
The following commit will fix this in a simpler way.
Signed-off-by: James Almer <jamrial@gmail.com>
Similarly, merge it back before returning.
Fixes ticket #5927.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
According to spec ISO_IEC_15444_12 "For any media stream for which no segment index is present, referred to as non‐indexed stream, the media stream associated with the first Segment Index box in the segment serves as a reference stream in a sense that it also describes the subsegments for any non‐indexed media stream."
Signed-off-by: Sasi Inguva <isasi@google.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The parser depends on the codec and thus must not be used with a different one.
If it is, the 'avctx->codec_id == s->parser->codec_ids[0] ...' assert in
av_parser_parse2 gets triggered.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This avoids potential rounding errors and guarantees the source aspect
ratio is preserved.
Keep writing pixel values when Stereo 3D Mode is enabled and for WebM,
as the format doesn't support anything else.
This fixes ticket #5743, implementing the suggestion from ticket #5903.
Signed-off-by: James Almer <jamrial@gmail.com>
This avoids continuity check failures in concatenated streams
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes remuxing apng streams coming from the apng demuxer.
This is a regression since 940b8908b9.
Found-by: James Almer <jamrial@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
If there are no index entries, e_old = st->index_entries is only one
byte large, since it was created by av_realloc called with size 0.
Thus accessing e_old[0].timestamp causes a heap buffer overflow.
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
The use of TLSv1_*_method() disallows newer protocol versions; instead
use SSLv23_*_method() and then explicitly disable the deprecated
protocol versions which should not be supported.
Fixes ticket #5915.
This fixes creating apng files, which is broken since commit
5ef1959080.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a15
Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>
Some people seem to oppose this the patch seems to have been missed for a month on the ML
lets restart the discussion and solve this after the release
This reverts commit e936c8d176.
Allowing larger timestamps makes it impossible to calculate basic things like the
difference of 2 timestamps or their sum without checking each individual computation for
overflow.
This should avoid a significant number of overflow checks
Fixes Ticket5136
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current code doesn't initialize AVPacket::pos. Made it point to FLVTAG so flv_read_packet can decode from pos
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the macro is expanded with a semicolon following it and the
macro itself contains a semicolon, we ended up in double semicolons,
which is treated as a statement that disallows further declarations.
This avoids errors about mixed declarations and statements on gcc,
after ee05079766.
Signed-off-by: Martin Storsjö <martin@martin.st>
3 parts:
- Supports multiple chapter streams
- Exports regular text chapter streams as opaque data. This prevents consumers
from showing chapters as if they were regular subtitle streams.
- Exports video chapter streams as thumbnails, and provides the first one as
an attached_pic.
This allows a consumer to run the muxer's init function without actually
writing the header, which is useful in chained muxers that support
automatic bitstream filtering.
Instead use our own struct, which we already use when using
gcrypt and gnutls.
In OpenSSL 1.1, the DH struct has been made opaque.
Signed-off-by: Martin Storsjö <martin@martin.st>
It is negative, so can't be used for left shifting.
This fixes ubsan runtime error: shift exponent -1 is negative
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Add new mime types AAL2-G726 for g726 as suggested in rfc 3551.
This patch will break interaction with applications that incorrectly
use big-endian G.726 with mime type G726 but we know of at least one
device (DVTel camera) that correctly implements the rfc, so do the same.
Fixes ticket #5890.
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
For 'nclx', the latest edition of the standard switched from JPEG XR
to 23001-8, which matches the current order of our entries. Bounds
are preserved as a sanity check.
For 'nclc', qtff edition 2016-09-13 introduced a few new entries.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Also check for possible overflows.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
It can be unset in avcodec_parameters_from_context and a value of 0
causes SIGFPE crashes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Fix problem to fail by a RTMP Control Message except "Set Chunk Size (1)" after an RTMP handshake. When 'nginx-rtmp-module' relays an RTMP, it sends not only control message 'Set Chunk Size (1)' but also 'Window Acknowledgement Size (5)'.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Read video_line_map from MXF generic picture essence descriptor and use
it to derive the coded field order. Use field_dominance to derive the
display field order from coded field order. If field_dominance is not
available the default value "1" is used as defined in SMPTE S377-1.
Fixes field_order detection for a bunch of DV/DVCPRO files. The heuristic
for deriving coded field order from video_line_map is inspired by
MediaInfo.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Negative values don't make sense and too large values can cause
overflows. For AV_CODEC_ID_ADPCM_THP this leads to a too small extradata
buffer being allocated, causing out-of-bounds writes.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Its impossible to update the filesize & duration values if seekback is not
possible as with live streams
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If probe_codec is called with pkt == NULL, it sets probe_packets to 0
and request_probe to -1.
However, request_probe can change when calling s->iformat->read_packet
and thus a probe_packets value of 0 doesn't guarantee a request_probe
value of -1.
In that case calling probe_codec again is necessary to prevent
triggering the assert.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This way it's more clear what the default values refer to, as
Undetermined/Unspecified is 0 for some, 2 for others.
Signed-off-by: James Almer <jamrial@gmail.com>
The problem was introduced in commit 1273bc6.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
mov_finalize_stsd_codec parses stream information from the ALAC extradata,
so run it after the extradata processing is completed in mov_read_stsd.
Fixes playback of 96kHz ALAC streams muxed by qaac or the reference alac encoder.
Fixes trac ticket #5826
This also fixes a minor bug introduced in the codecpar conversion, where
the termination condition for extracting the extradata does not match
the actual extradata setting code. As a result, the packet durations
made up by lavf go back to their values before the codecpar conversion.
That is of little consequence since that code should eventually be
dropped completely.
This way they can be reused by other code without including the whole
decoder-specific hevcdec.h
Also, add the HEVC_ prefix to them, since similarly named values exist
for H.264 as well and are sometimes used in the same code.
The code works just fine regardless of unit, so only make sure DisplayUnit
is not "unknown".
Found-by: Nicolas George <george@nsup.org>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: James Almer <jamrial@gmail.com>
