ff_wma_init is used only by wmadec and wmaenc, and neither of them
can handle more than 2 channels.
This fixes crashes with invalid files.
Based on patch by Piotr Bandurski and Michael Niedermayer.
Signed-off-by: Martin Storsjö <martin@martin.st>
This creates proper position independent code when accessing
data symbols if CONFIG_PIC is set.
References to external symbols should now use the movrelx macro.
Some additional code changes are required since this macro may
need a register to hold the GOT pointer.
Signed-off-by: Mans Rullgard <mans@mansr.com>
* qatar/master:
dsputilenc_mmx: split assignment of ff_sse16_sse2 to SSE2 section.
dnxhdenc: add space between function argument type and comment.
x86: fmtconvert: add special asm for float_to_int16_interleave_misc_*
attributes: Add a definition of av_always_inline for MSVC
cmdutils: Pass the actual chosen encoder to filter_codec_opts
os_support: Add fallback definitions for stat flags
os_support: Rename the poll fallback function to ff_poll
network: Check for struct pollfd
os_support: Don't compare a negative number against socket descriptors
os_support: Include all the necessary headers for the win32 open function
x86: vc1: fix and enable optimised loop filter
Conflicts:
cmdutils.c
cmdutils.h
ffmpeg.c
ffplay.c
libavformat/os_support.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The problem is that the ssse3 psign instruction does the wrong
thing here. Commit ea60dfe incorrectly removed a macro emulating
this instruction for pre-ssse3 code. However, the emulation is
incorrect, and the code relies on the behaviour of the macro.
Specifically, the psign sets destination elements to zero where
the corresponding source element is zero, whereas the emulation
only negates destination elements where the source is negative.
Furthermore, the PSIGNW_MMX macro in x86util.asm is totally bogus,
which is why the original VC-1 code had an additional right shift
when using it. Since the psign instruction cannot be used here,
skip all the macro hell and use the working instruction sequence
directly.
None of this was noticed due a stray return statement in
ff_vc1dsp_init_mmx() which meant that only the mmx version of the
loop filter was ever used (before being removed in ea60dfe).
Signed-off-by: Mans Rullgard <mans@mansr.com>
The "Default" style written in the header is ignored unless you explicit
it in the Dialogue events (it was valid, just ignored). This requires an
update of the SubRip test since the ASS output obviously changes.
Below fixes the maximum reference count check for second reference list in
non-B frames. There is nothing to prohibit full (field sized) reference
list in this case as far as I can tell, and this fixes several syntax-test
files here (this is a regression caused when this check was made more
stringent by
http://git.videolan.org/?p=ffmpeg.git;a=commit;h=dc9ce40069bde3d28f8d0b3e5bd733ae255fecb5)
Probably a silly corner case seldom seen irl, but thought I'd pass along
in case there was interest in correcting the check.
---------------
h264: Fix maximum reference count check for non-b frames; full range is
technically ok
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
mss1: validate number of changeable palette entries
mss1: report palette changed when some additional colours were decoded
x86: fft: replace call to memcpy by a loop
udp: Support IGMPv3 source specific multicast and source blocking
dxva2: include dxva.h if found
libm: Provide fallback definitions for isnan() and isinf()
tcp: Pass NULL as hostname to getaddrinfo if the string is empty
tcp: Set AI_PASSIVE when the socket will be used for listening
Conflicts:
configure
libavcodec/mss1.c
libavformat/udp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avcodec_encode_audio2 docs are ambiguous about avpkt->destruct and imply
it gets reset.
Signed-off-by: Michael Bradshaw <mbradshaw@sorensonmedia.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The function call was a mess to handle, and memcpy cannot make
the assumptions we do in the new code.
Tested on an IMC sample: 430c -> 370c.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Apparently, some build environments require dxva.h even for dxva2,
while others lack this header entirely. Including it conditionally
allows building in both cases.
Signed-off-by: Martin Storsjö <martin@martin.st>
Move the lavc/imgconvert functions and rename them as follows:
avpicture_get_size -> av_image_get_buffer_size()
avpicture_fill -> av_image_fill_arrays()
avpicture_layout -> av_image_copy_to_buffer()
The new functions have an align parameter, which allows to define the
linesize alignment assumed in the buffer (which is set or read).
The names of the functions are consistent with the lavu/samples API
(av_samples_get_buffer_size(), av_samples_fill_arrays()).
The MBAFF flag may only be signaled if we're actually dealing with
a full frame, and not singular fields, as it can happen in mixed content.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
wtv: Check the return value from gmtime
x86: fft: convert sse inline asm to yasm
x86: place some inline asm under #if HAVE_INLINE_ASM
Conflicts:
libavcodec/x86/fft_sse.c
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
log: Only include unistd.h if configure found it
ape: create audio stream before reading tags.
mov: make a length variable larger.
image2: Add "start_number" private option to the demuxer
image2: Add "start_number" private option to the muxer
avconv: remove a forgotten debugging printf.
avconv: use more descriptive names for hardcoded filters.
avconv: remove redundant handling of async.
doc/filters: fix typo.
h264: use asm cabac reader under a generic condition
Conflicts:
ffmpeg.c
libavformat/img2dec.c
libavformat/img2enc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The MBAFF flag may only be signaled if we're actually dealing with
a full frame, and not singular fields, as it can happen in mixed content.
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
x86: Only use optimizations with cmov if the CPU supports the instruction
x86: Add CPU flag for the i686 cmov instruction
x86: remove unused inline asm macros from dsputil_mmx.h
x86: move some inline asm macros to the only places they are used
lavfi: Add the af_channelmap audio channel mapping filter.
lavfi: add join audio filter.
lavfi: allow audio filters to request a given number of samples.
lavfi: support automatically inserting the fifo filter when needed.
lavfi/audio: eliminate ff_default_filter_samples().
Conflicts:
Changelog
libavcodec/x86/h264dsp_mmx.c
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/avfilter.h
libavfilter/avfiltergraph.c
libavfilter/version.h
libavutil/x86/cpu.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This removes a dependency on implementation details from generic
code and allows easy addition of the equivalent optimisation for
other architectures than x86.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Compared to the decoder side, this code is able to change both the
delay and the number of threads seamlessly during encoding. Also
any idle thread can pick up tasks, the strict round robin in order
limit is gone too.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
libspeexenc: add supported sample rates and channel layouts.
Replace usleep() calls with av_usleep()
lavu: add av_usleep() function
utvideo: mark interlaced frames as such
utvideo: Fix interlaced prediction for RGB utvideo.
cosmetics: do not use full path for local headers
lavu/file: include unistd.h only when available
configure: check for unistd.h
log: include unistd.h only when needed
lavf: include libavutil/time.h instead of redeclaring av_gettime()
Conflicts:
configure
doc/APIchanges
ffmpeg.c
ffplay.c
libavcodec/utvideo.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
fix hardcoded tables compililation caused by missing math constants
lavf: Make codec_tag arrays constant
twinvq: give massive struct a name.
lavf, lavu: version bumps and APIchanges for av_gettime() move
lavfi/audio: don't set cur_buf in ff_filter_samples().
lavfi/fifo: add audio version of the fifo filter.
fifo: fix parenthesis placement.
lavfi: rename vf_fifo.c -> fifo.c
lavc: remove stats_in from AVCodecContext options table.
Conflicts:
doc/APIchanges
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/audio.c
libavfilter/fifo.c
libavformat/version.h
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The decoder configuration initializes the sbr mdct, which needs to know about the sample format to properly take the scale factor into account.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Its documentation states that it is allocated/freed by the caller, but
it is declared as an AV_OPT_TYPE_STRING AVOption. Since
367732832f the AVOptions system frees
strings automatically. This can be considered an API break, since it
won't work when the caller doesn't use av_malloc() to allocate the
memory or wants to use the string after closing the codec.
Since there is not much value in this field being an AVOption, the best
solution is to remove it from the options table.
* qatar/master:
MS Screen 1 decoder
aacdec: Fix popping channel layouts.
av_gettime: support Win32 without gettimeofday()
Use av_gettime() in various places
Move av_gettime() to libavutil
dct-test: use emms_c() from libavutil instead of duplicating it
mov: fix operator precedence bug
mathematics.h: remove a couple of math defines
Remove unnecessary inclusions of [sys/]time.h
lavf: remove unnecessary inclusions of unistd.h
bfin: libswscale: add const where appropriate to fix warnings
bfin: libswscale: remove unnecessary #includes
udp: Properly check for invalid sockets
tcp: Check the return value from getsockopt
network: Use av_strerror for getting error messages
udp: Properly print error from getnameinfo
mmst: Use AVUNERROR() to convert error codes to the right range for strerror
network: Pass pointers of the right type to get/setsockopt/ioctlsocket on windows
rtmp: Reduce the number of idle posts sent by sleeping 50ms
Conflicts:
Changelog
configure
libavcodec/aacdec.c
libavcodec/allcodecs.c
libavcodec/avcodec.h
libavcodec/dct-test.c
libavcodec/version.h
libavformat/riff.c
libavformat/udp.c
libavutil/Makefile
libswscale/bfin/yuv2rgb_bfin.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master: (24 commits)
flvdec: remove incomplete, disabled seeking code
mem: add support for _aligned_malloc() as found on Windows
lavc: Extend the documentation for avcodec_init_packet
flvdec: remove incomplete, disabled seeking code
http: replace atoll() with strtoll()
mpegts: remove unused/incomplete/broken seeking code
af_amix: allow float planar sample format as input
af_amix: use AVFloatDSPContext.vector_fmac_scalar()
float_dsp: add x86-optimized functions for vector_fmac_scalar()
float_dsp: Move vector_fmac_scalar() from libavcodec to libavutil
lavr: Add x86-optimized function for flt to s32 conversion
lavr: Add x86-optimized function for flt to s16 conversion
lavr: Add x86-optimized functions for s32 to flt conversion
lavr: Add x86-optimized functions for s32 to s16 conversion
lavr: Add x86-optimized functions for s16 to flt conversion
lavr: Add x86-optimized function for s16 to s32 conversion
rtpenc: Support packetizing iLBC
rtpdec: Add a depacketizer for iLBC
Implement the iLBC storage file format
mov: Support muxing/demuxing iLBC
...
Conflicts:
Changelog
configure
libavcodec/avcodec.h
libavcodec/dsputil.c
libavcodec/version.h
libavformat/movenc.c
libavformat/mpegts.c
libavformat/version.h
libavutil/mem.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The documentation states that av_image_check_size() will return a
negative value in case of error, while the check is done on ret != 0.
Also return a proper error code rather than -1 in case the check fails.
* qatar/master:
lavr: add x86-optimized functions for mixing 1-to-2 s16p with flt coeffs
lavr: add x86-optimized functions for mixing 1-to-2 fltp with flt coeffs
Add Dolby/DPLII downmix support to libavresample
vorbisdec: replace div/mod in loop with a counter
fate: vorbis: add 5.1 surround test
rtpenc: Allow requesting H264 RTP packetization mode 0
configure: Sort the library listings in the help text alphabetically
dwt: remove variable-length arrays
RTMPT protocol support
http: Properly handle chunked transfer-encoding for replies to post data
http: Fail reading if the connection has gone away
amr: Mark an array const
amr: More space cleanup
rtpenc: Fix memory leaks in the muxer open function
Conflicts:
Changelog
configure
doc/APIchanges
libavformat/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Defining restrict results - for some compilers - in changing other
uses of the restrict keyword also, e.g. __declspec(restrict) gets
changed to __declspec(__restrict) on MSVC. This causes compilation
failures. Therefore, using a private namespace macro instead is
more reliable and robust.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
