Use static mutexes instead of requiring a lock manager. The behavior
should be roughly the same before and after this change for API users
which did not set the lock manager at all (except that a minor memory
leak disappears).
This removes the XP compatibility code, and switches entirely to SWR
locks, which are available starting at Windows Vista.
This removes CRITICAL_SECTION use, which allows us to add
PTHREAD_MUTEX_INITIALIZER, which will be useful later.
Windows XP is hereby not a supported build target anymore. It was
decided in a project vote that this is OK.
AVX-512 consists of a plethora of different extensions, but in order to keep
things a bit more manageable we group together the following extensions
under a single baseline cpu flag which should cover SKL-X and future CPUs:
* AVX-512 Foundation (F)
* AVX-512 Conflict Detection Instructions (CD)
* AVX-512 Byte and Word Instructions (BW)
* AVX-512 Doubleword and Quadword Instructions (DQ)
* AVX-512 Vector Length Extensions (VL)
On x86-64 AVX-512 provides 16 additional vector registers, prefer using
those over existing ones since it allows us to avoid using `vzeroupper`
unless more than 16 vector registers are required. They also happen to
be volatile on Windows which means that we don't need to save and restore
existing xmm register contents unless more than 22 vector registers are
required.
Big thanks to Intel for their support.
Add av_sat_sub32 and av_sat_dsub32 as the subtraction analogues to
av_sat_add32/av_sat_dadd32.
Also clarify the formulas for dadd32/dsub32.
Signed-off-by: Andrew D'Addesio <modchipv12@gmail.com>
The macro was added in 43171a2a73, but I forgot to add it to the DJGPP architecture in that change.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Drivers can support a format for surfaces without also supporting it for
images, so we can't assume that sw_format is usable for transfer. This
would previously hit an assert in cases where it isn't.
Makes the uninit function re-entrable, which can be a common case
when an API user first tries to initialize its context, fails, and
then finally unrefs the AVHWDevice.
Fixes a crash reported by sm2345 on IRC.
This was added for compatibility with libav, by leaving a space for
formats added in libav to be merged. Since that feature has been
removed, we don't need a gap here.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
This was added in early 2013 and abandoned several months later; as far as
I can tell, there are no external users. Future OpenCL use will be via
hwcontext, which requires neither special OpenCL-only API nor global state
in libavutil.
All internal users are also deleted - this is just the unsharp filter
(replaced by unsharp_opencl, which is more flexible) and the deshake filter
(no replacement).
Using cl_arm_import_memory. Unfortunately, despite this not being a
standard extension, the function clImportMemoryARM() is not accessible
via clGetExtensionFunctionAddressForPlatform(). This means that it has
to be linked directly to the ARM OpenCL binary, so making a portable
binary is not possible as it is with all other mapping extensions.
Fixes build warning of "variable 's' is declared but not used"
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
* commit '3152058bf1dca318898550efacf0286f4836cae6':
libavcodec: Don't use dllexport, only dllimport when building DLLs
Merged-by: James Almer <jamrial@gmail.com>
The macros for ICC and MSVC correctly push and pop the diagnostic
state of the compiler when disabling deprecation warnings. The
ones for clang/gcc should do the same. Without this, if a blanket
deprecation warning is applied to the code base it'll be flipped
back on incorrectly with FF_ENABLE_DEPRECATION_WARNINGS.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Variables used in inline assembly need to be marked with attribute((used)).
Static constants already were, via the define of DECLARE_ASM_CONST.
But DECLARE_ALIGNED does not add this attribute, and some of the variables
defined with it are const only used in inline assembly, and therefore
appeared dead. This change adds a macro DECLARE_ASM_ALIGNED that marks
variables as used.
This change makes FFMPEG work with Clang's ThinLTO.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '7ac092d05de487d088bc96ab4a7bd6207fbfa98c':
build: CryptGenRandom --> wincrypt, it is a better name
Merged-by: James Almer <jamrial@gmail.com>
* commit 'ccbb31c14b766ef666ef2daa8c467e478183a957':
qsv: Make sure the session is set with the latest version
Merged-by: James Almer <jamrial@gmail.com>
* commit 'accb06120c13a4ead442464d96f2fa318fa07a4e':
configure: Use dllexport/dllimport for data symbols across DLLs with mingw
Merged-by: James Almer <jamrial@gmail.com>
* commit 'abf1c058d1bd0ed1b820ea5e501a4484756f00b0':
msvc: Properly specify dllexport for data symbols shared across dll boundaries
Merged-by: James Almer <jamrial@gmail.com>
This gives FFmpeg libs a field that they can freely and safely use.
Avoiding the need of wrapping of a users opaque_ref field and its issues.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The user-supplied value for timecode_rate in drawtext is rounded
to nearest integer. So, a supplied value of 0.49 or lower is rounded to 0.
This throws a misleading error message which says "Timecode frame rate must be
specified". Changed message to account for values under one.
Also noted supported framerates for drop TC.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '97cfe1d8bd1968143e2ba9aa46ebe9504a835e24':
Convert all AVClass struct declarations to designated initializers.
Merged-by: James Almer <jamrial@gmail.com>
The fields can be accessed directly, so these are not needed anymore.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
* commit '193b09189004ede4a6998e69192d1a9f63602088':
thread: Define ff_mutex_* macros as stub functions when threads are disabled
Merged-by: James Almer <jamrial@gmail.com>
* commit '10f4511f14a4e830c0ed471df4cd1cc2a18a481a':
libavutil: Make LOCAL_ALIGNED(xx be equal to LOCAL_ALIGNED_xx(
Also added LOCAL_ALIGNED_4 as it's used in vp8 decoder, and
simplified the configure defines.
Merged-by: James Almer <jamrial@gmail.com>
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Technically _tzcnt* intrinsics are only available when the BMI
instruction set is present. However the instruction encoding
degrades to "rep bsf" on older processors.
Clang for Windows debatably restricts the _tzcnt* instrinics behind
the __BMI__ architecture define, so check for its presence or
exclude the usage of these intrinics when clang is present.
See also:
https://ffmpeg.org/pipermail/ffmpeg-devel/2015-November/183404.htmlhttps://bugs.llvm.org/show_bug.cgi?id=30506http://lists.llvm.org/pipermail/cfe-dev/2016-October/051034.html
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Reviewed-by: Matt Oliver <protogonoi@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '1bd986ed4b0e95ded368a8eeb5c044853c090f9b':
hwcontext: Move NONE to the be the first member of AVHWDeviceType
Merged-by: James Almer <jamrial@gmail.com>
* commit '07a2b155949eb267cdfc7805f42c7b3375f9c7c5':
Bump major versions of all libraries
A few API deprecated ~2 years ago or more are also postponed here for
varying reasons.
FF_API_LOWRES:
Since this functionality depends on AVStream->codec, i figure the two can
be removed at the same time in the next bump or so.
FF_API_AVCTX_TIMEBASE:
Couldn't get this one to work. Not just libavcodec but apparently also
libavformat and ffmpeg.c expect AVCodecContext->time_base to be set for
decoding. Upon removal some tests report a different generic stream time
base (like 1/25), and others lose packet duration values. I guess it's
somehow tied to the AVStream->codec clusterfuck.
It can be dealt with alongside FF_API_LAVF_AVCTX in the next bump.
FF_API_OLD_FILTER_OPTS_ERROR:
This one is meant to remain after FF_API_OLD_FILTER_OPTS is removed.
Its purpose is displaying the corrected command line using the new syntax
as a suggestion as part of the error message.
Merged-by: James Almer <jamrial@gmail.com>
* commit '8e2346154e6d58b733fd20326ce706f82fd91b3e':
libavutil: Hook up the rest of the gcc specific attributes to clang as well
Merged-by: James Almer <jamrial@gmail.com>
* commit '3aa9c523e9cf4f4a5e239ac737281e096c884907':
libavutil: Define the noreturn attribute for clang in MSVC mode as well
Merged-by: James Almer <jamrial@gmail.com>
The extra space got included as part of the expansion of ELF, which
later interfered with gas-preprocessor which earlier only stripped out
leftover lines starting with '#' if the line started with that char.
Signed-off-by: Martin Storsjö <martin@martin.st>
Replace generic with block size specific function.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The initialisation should be common. For libmfx, it was previously
happening in the derivation function and this moves it out. For VAAPI,
it fixes some failures when deriving from a DRM device because this
initialisation did not run.
* commit 'e6bff23f1e11aefb16a2b5d6ee72bf7469c5a66e':
cpu: add a function for querying maximum required data alignment
Adapted to work with the arbitrary runtime cpuflag changes av_force_cpu_flags()
can generate.
Merged-by: James Almer <jamrial@gmail.com>
Replace generic with block size specific function.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Load the specific destination bytes instead of MSA load and pack.
Pack the data to half word before clipping.
Use immediate unsigned saturation for clip to max saving one vector register.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Preload data in band filter 0-8 for better pipeline parallelization.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Refer to "checkasm: use perf API on Linux ARM*" commit for the
rationale.
The implementation is somehow duplicated with checkasm, but so is the
current usage of AV_READ_TIME(). Until these implementations and
heuristics are made consistent, I don't see a way of sharing that code.
Note: when using libavutil/timer.h, it is now important to include
before any other include due to the _GNU_SOURCE requirement.
Load the specific destination bytes instead of MSA load and pack.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
We currently only have exported data symbols within libavcodec, but
the concept is easy to extend to other libraries if necessary.
The attribute declaration needs to be in a private header though,
since we can't use CONFIG_SHARED in public installed headers.
Signed-off-by: Martin Storsjö <martin@martin.st>
The toolchain for this target is unmaintained since many years.
While it has been continuously build tested on fate, it hasn't
actually been tested at runtime since many, many years (and back
then, only a few codecs in libavcodec were tested).
So far, keeping support for it has been mostly effortless, but
the compiler does seem to have issues with dllimported data symbols,
ending up as internal compiler errors in some cases. Instead of
jumping through further hoops to work around that, just remove the
target.
Signed-off-by: Martin Storsjö <martin@martin.st>
On windows, the offset for the relocation doesn't get stored in
the relocation itself, but as an unsigned immediate in the opcode.
Therefore, negative offsets has to be handled via a separate sub
instruction, just as on MachO.
Signed-off-by: Martin Storsjö <martin@martin.st>
Improved version of VBROADCASTSS that works like the avx2 instruction.
Emulation of vpbroadcastd.
Horizontal sum HSUMPS that places the result in all elements.
Emulation of blendvps and pblendvb.
Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com>
If using the winstore compat library, a fallback LoadLibrary
function does exist, that only calls LoadPackagedLibrary though
(which doesn't work for dynamically loading d3d11 DLLs).
Therefore explicitly check the targeted API family instead.
Make this check a reusable HAVE_* component which other parts
of the libraries can check when necessary as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Merged from Libav commit 4d330da006.
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merged from Libav commit 45df7adc1d.
Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Many image formats support embedding of ICC profiles directly in
their bitstreams. Add a new side data type to allow exposing them to
API users.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reduced msa load-store code.
Removed inline asm of GP load-store for 64 bit.
Updated variable names in GP load-store macros for naming consistency.
Corrected macro descriptions.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Rework it to improve performance. Now mutex is not shared by workers,
instead each worker has its own mutex and condition variable. This
reduces lock contention between workers. Also use atomic variable for
counter.
The interface also allows execute to run special function on main
thread, requested by Ronald.
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
Hardware pixel formats do not tell you anything about their actual
contents, but should still score higher than formats with completely
unknown properties, which in turn should score higher than invalid
formats.
Do not return an AVERROR code as a score.
Fixes a hang in libavfilter where format negotiation gets stuck in a
loop because AV_PIX_FMT_NONE scores more highly than all other
possibilities.
If using the winstore compat library, a fallback LoadLibrary
function does exist, that only calls LoadPackagedLibrary though
(which doesn't work for dynamically loading d3d11 DLLs).
Therefore explicitly check the targeted API family instead.
Make this check a reusable HAVE_* component which other parts
of the libraries can check when necessary as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Merges Libav commit 5030e3856c.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Makes dealing with formats that can not be used for staging textures
easier (DXGI_FORMAT_420_OPAQUE). It also saves memory if the staging
texture is never needed, so this is a good thing.
Merges Libav commit 98d73e4174.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It appears in this case, frames_ininit is called twice (once by
av_hwframe_ctx_init(), and again by unreffing the frames ctx ref).
Merges Libav commit 086321c612.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When targeting the UWP API subset, the LoadLibrary function is not
available (and the fallback, LoadPackagedLibrary, can't be used to
load system DLLs). In these cases, link directly to the functions
in the DLLs instead of trying to load them dynamically at runtime.
Merges Libav commit fd1ffa1f10.
Signed-off-by: Martin Storsjö <martin@martin.st>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Yasm:
src/libavfilter/x86/af_volume.asm:24: warning: Standard COFF does not support read-only data sections
src/libavfilter/x86/af_volume.asm:24: warning: Unrecognized qualifier `align'
Nasm:
src/libavfilter/x86/af_volume.asm:24: error: standard COFF does not support section alignment specification
src/libavutil/x86/x86inc.asm:92: ... from macro `SECTION_RODATA' defined here
Tested-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Makes dealing with formats that can not be used for staging textures
easier (DXGI_FORMAT_420_OPAQUE). It also saves memory if the staging
texture is never needed, so this is a good thing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It appears in this case, frames_ininit is called twice (once by
av_hwframe_ctx_init(), and again by unreffing the frames ctx ref).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When targeting the UWP API subset, the LoadLibrary function is not
available (and the fallback, LoadPackagedLibrary, can't be used to
load system DLLs). In these cases, link directly to the functions
in the DLLs instead of trying to load them dynamically at runtime.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
(cherry picked from commit c5714b51aa)
Some frames contexts are not usable without additional format-specific
state in hwctx. This change adds new functions frames_derive_from and
frames_derive_to to initialise this state appropriately when deriving
a frames context which will require it to be set.
(cherry picked from commit 27978155bc)
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
(cherry picked from commit b7487f4f3c)
The driver is somewhat bitrotten (not updated for years) but is still
usable for decoding with this change. To support it, this adds a new
driver quirk to indicate no support at all for surface attributes.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
(cherry picked from commit e791b915c7)
Due to a peculiarity in the ModR/M addressing encoding, the r12 and r13
registers sometimes requires an additional byte when used as a base register.
r14 and r15 doesn't have that issue, so prefer using them.
We overload the `call` instruction with a macro, but it would misbehave when
the macro argument wasn't a valid identifier. Fix it by explicitly checking
if the argument is an identifier.
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
We have floor, ceil, and trunc. Let's add round.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add dxva2_pool_release_dummy() and use it in call to
av_buffer_create() in dxva2_pool_alloc().
Prior to this change, av_buffer_create() was called with NULL for the
third argument, which indicates that av_buffer_default_free() should
be used to free the buffer's data. Eventually, it gets to
buffer_pool_free() and calls buf->free() on a surface object (which is
av_buffer_default_free()).
This can result in a crash when the debug version of the C-runtime is
used on Windows. While it doesn't appear to result in a crash when
the release version of the C-runtime is used on Windows, it likely
results in memory corruption, since av_free() is being called on
memory that was allocated using
IDirectXVideoAccelerationService::CreateSurface().
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add dxva2_pool_release_dummy() and use it in call to
av_buffer_create() in dxva2_pool_alloc().
Prior to this change, av_buffer_create() was called with NULL for the
third argument, which indicates that av_buffer_default_free() should
be used to free the buffer's data. Eventually, it gets to
buffer_pool_free() and calls buf->free() on a surface object (which is
av_buffer_default_free()).
This can result in a crash when the debug version of the C-runtime is
used on Windows. While it doesn't appear to result in a crash when
the release version of the C-runtime is used on Windows, it likely
results in memory corruption, since av_free() is being called on
memory that was allocated using
IDirectXVideoAccelerationService::CreateSurface().
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
This adds tons of code for no other benefit than making VideoToolbox
support conform with the new hwaccel API (using hw_device_ctx and
hw_frames_ctx).
Since VideoToolbox decoding does not actually require the user to
allocate frames, the new code does mostly nothing.
One benefit is that ffmpeg_videotoolbox.c can be dropped once generic
hwaccel support for ffmpeg.c is merged from Libav.
Does not consider VDA or VideoToolbox encoding.
Fun fact: the frame transfer functions are copied from vaapi, as the
mapping makes copying generic boilerplate. Mapping itself is not
exported by the VT code, because I don't know how to test.
When targeting windows, the .arch directive isn't available.
So far, when building for windows, we've always used gas-preprocessor,
both when using msvc's armasm and when using clang. Lately, clang/llvm
has implemented the last missing piece (altmacro support) for building
our assembly without gas-preprocessor. This means that we now build
for arm/windows with clang without any extra compatibility layer.
Signed-off-by: Martin Storsjö <martin@martin.st>
