Black isn't always just memset(ptr, 0, size). Limited YUV in particular
requires relatively non-obvious values, and filling a frame with
repeating 0 bytes is disallowed in some contexts. With component sizes
larger than 8 or packed YUV, this can become relatively complicated. So
having a generic function for this seems helpful.
In order to handle the complex cases in a generic way without destroying
performance, this code attempts to compute a black pixel, and then uses
that value to clear the image data quickly by using a function like
memset.
Common cases like yuv410p10 or rgba can't be handled with a simple
memset, so there is some code to fill memory with 2/4/8 byte patterns.
For the remaining cases, a generic slow fallback is used.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Many image formats support embedding of ICC profiles directly in
their bitstreams. Add a new side data type to allow exposing them to
API users.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reduced msa load-store code.
Removed inline asm of GP load-store for 64 bit.
Updated variable names in GP load-store macros for naming consistency.
Corrected macro descriptions.
Signed-off-by: Kaustubh Raste <kaustubh.raste@imgtec.com>
Reviewed-by: Manojkumar Bhosale <Manojkumar.Bhosale@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Rework it to improve performance. Now mutex is not shared by workers,
instead each worker has its own mutex and condition variable. This
reduces lock contention between workers. Also use atomic variable for
counter.
The interface also allows execute to run special function on main
thread, requested by Ronald.
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
Hardware pixel formats do not tell you anything about their actual
contents, but should still score higher than formats with completely
unknown properties, which in turn should score higher than invalid
formats.
Do not return an AVERROR code as a score.
Fixes a hang in libavfilter where format negotiation gets stuck in a
loop because AV_PIX_FMT_NONE scores more highly than all other
possibilities.
If using the winstore compat library, a fallback LoadLibrary
function does exist, that only calls LoadPackagedLibrary though
(which doesn't work for dynamically loading d3d11 DLLs).
Therefore explicitly check the targeted API family instead.
Make this check a reusable HAVE_* component which other parts
of the libraries can check when necessary as well.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Merges Libav commit 5030e3856c.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Makes dealing with formats that can not be used for staging textures
easier (DXGI_FORMAT_420_OPAQUE). It also saves memory if the staging
texture is never needed, so this is a good thing.
Merges Libav commit 98d73e4174.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It appears in this case, frames_ininit is called twice (once by
av_hwframe_ctx_init(), and again by unreffing the frames ctx ref).
Merges Libav commit 086321c612.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When targeting the UWP API subset, the LoadLibrary function is not
available (and the fallback, LoadPackagedLibrary, can't be used to
load system DLLs). In these cases, link directly to the functions
in the DLLs instead of trying to load them dynamically at runtime.
Merges Libav commit fd1ffa1f10.
Signed-off-by: Martin Storsjö <martin@martin.st>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Yasm:
src/libavfilter/x86/af_volume.asm:24: warning: Standard COFF does not support read-only data sections
src/libavfilter/x86/af_volume.asm:24: warning: Unrecognized qualifier `align'
Nasm:
src/libavfilter/x86/af_volume.asm:24: error: standard COFF does not support section alignment specification
src/libavutil/x86/x86inc.asm:92: ... from macro `SECTION_RODATA' defined here
Tested-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Makes dealing with formats that can not be used for staging textures
easier (DXGI_FORMAT_420_OPAQUE). It also saves memory if the staging
texture is never needed, so this is a good thing.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
It appears in this case, frames_ininit is called twice (once by
av_hwframe_ctx_init(), and again by unreffing the frames ctx ref).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
When targeting the UWP API subset, the LoadLibrary function is not
available (and the fallback, LoadPackagedLibrary, can't be used to
load system DLLs). In these cases, link directly to the functions
in the DLLs instead of trying to load them dynamically at runtime.
Signed-off-by: Martin Storsjö <martin@martin.st>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
(cherry picked from commit c5714b51aa)
Some frames contexts are not usable without additional format-specific
state in hwctx. This change adds new functions frames_derive_from and
frames_derive_to to initialise this state appropriately when deriving
a frames context which will require it to be set.
(cherry picked from commit 27978155bc)
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
(cherry picked from commit b7487f4f3c)
The driver is somewhat bitrotten (not updated for years) but is still
usable for decoding with this change. To support it, this adds a new
driver quirk to indicate no support at all for surface attributes.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
(cherry picked from commit e791b915c7)
Due to a peculiarity in the ModR/M addressing encoding, the r12 and r13
registers sometimes requires an additional byte when used as a base register.
r14 and r15 doesn't have that issue, so prefer using them.
We overload the `call` instruction with a macro, but it would misbehave when
the macro argument wasn't a valid identifier. Fix it by explicitly checking
if the argument is an identifier.
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
We have floor, ceil, and trunc. Let's add round.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add dxva2_pool_release_dummy() and use it in call to
av_buffer_create() in dxva2_pool_alloc().
Prior to this change, av_buffer_create() was called with NULL for the
third argument, which indicates that av_buffer_default_free() should
be used to free the buffer's data. Eventually, it gets to
buffer_pool_free() and calls buf->free() on a surface object (which is
av_buffer_default_free()).
This can result in a crash when the debug version of the C-runtime is
used on Windows. While it doesn't appear to result in a crash when
the release version of the C-runtime is used on Windows, it likely
results in memory corruption, since av_free() is being called on
memory that was allocated using
IDirectXVideoAccelerationService::CreateSurface().
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add dxva2_pool_release_dummy() and use it in call to
av_buffer_create() in dxva2_pool_alloc().
Prior to this change, av_buffer_create() was called with NULL for the
third argument, which indicates that av_buffer_default_free() should
be used to free the buffer's data. Eventually, it gets to
buffer_pool_free() and calls buf->free() on a surface object (which is
av_buffer_default_free()).
This can result in a crash when the debug version of the C-runtime is
used on Windows. While it doesn't appear to result in a crash when
the release version of the C-runtime is used on Windows, it likely
results in memory corruption, since av_free() is being called on
memory that was allocated using
IDirectXVideoAccelerationService::CreateSurface().
Signed-off-by: Aaron Levinson <alevinsn@aracnet.com>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Reviewed-by: Mark Thompson <sw@jkqxz.net>
This adds tons of code for no other benefit than making VideoToolbox
support conform with the new hwaccel API (using hw_device_ctx and
hw_frames_ctx).
Since VideoToolbox decoding does not actually require the user to
allocate frames, the new code does mostly nothing.
One benefit is that ffmpeg_videotoolbox.c can be dropped once generic
hwaccel support for ffmpeg.c is merged from Libav.
Does not consider VDA or VideoToolbox encoding.
Fun fact: the frame transfer functions are copied from vaapi, as the
mapping makes copying generic boilerplate. Mapping itself is not
exported by the VT code, because I don't know how to test.
When targeting windows, the .arch directive isn't available.
So far, when building for windows, we've always used gas-preprocessor,
both when using msvc's armasm and when using clang. Lately, clang/llvm
has implemented the last missing piece (altmacro support) for building
our assembly without gas-preprocessor. This means that we now build
for arm/windows with clang without any extra compatibility layer.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'e435beb1ea5380a90774dbf51fdc8c941e486551':
crypto: consistently use size_t as type for length parameters
Merged-by: Clément Bœsch <cboesch@gopro.com>
Fixes the following warning:
libavutil/timecode.c:103:60: warning: '%02d' directive output may be truncated writing between 2 and 10 bytes into a region of size between 0 and 7
* commit '92db5083077a8b0f8e1050507671b456fd155125':
build: Generate pkg-config files from Make and not from configure
build: Store library version numbers in .version files
Includes cherry-picked commits 8a34f36593 and
ee164727dd to fix issues.
Changes were also made to retain support for raise_major and build_suffix.
Reviewed-by: ubitux
Merged-by: James Almer <jamrial@gmail.com>
* commit '11a9320de54759340531177c9f2b1e31e6112cc2':
build: Move build-system-related helper files to a separate subdirectory
"ffbuild" directory name is used instead of "avbuild".
Merged-by: Clément Bœsch <u@pkh.me>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
Some frames contexts are not usable without additional format-specific
state in hwctx. This change adds new functions frames_derive_from and
frames_derive_to to initialise this state appropriately when deriving
a frames context which will require it to be set.
Inlining public functions hardcodes their implementation into the ABI,
so it should be avoided unless there is a very good reason for it. No
such reason exists in this case.
Purpose: libavutil/thread.h: Fixed g++ build error when ASSERT_LEVEL
is greater than 1. This is only relevant when thread.h is included by
C++ files. In this case, the relevant code is only defined if
HAVE_PTHREADS is defined as 1. Use configure --assert-level=2 to do
so.
Note: Issue discovered as a result of Coverity build failure. Cause
of build failure pinpointed by Hendrik Leppkes.
Comments:
-- libavutil/thread.h: Altered ASSERT_PTHREAD_NORET definition such
that it uses av_make_error_string instead of av_err2str().
av_err2str() uses a "parenthesized type followed by an initializer
list", which is apparently not valid C++. This issue started
occurring because thread.h is now included by the DeckLink C++
files. The alteration does the equivalent of what av_err2str()
does, but instead declares the character buffer as a local
variable.
Signed-off-by: Marton Balint <cus@passwd.hu>
* commit '2170017a1cd033b6f28e16476921022712a522d8':
avutil: fix data race in av_get_cpu_flags()
This commit is a noop, see fed50c4304
Merged-by: James Almer <jamrial@gmail.com>
Use AVBprint to implement av_strreplace
add av_strreplace test case TEST_STRREPLACE
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
This avoids potential undefined behavior in debug mode while still allowing
developers which want to check for potential additional overflows to do so
by manually enabling this.
Reviewed-by: wm4
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
* commit '6a1ea4ec932f4fc9fdc00ec51ee070b298ddb35f':
arm: warn/error on movrelx usage problematic with PIC on ELF
Merged-by: James Almer <jamrial@gmail.com>
* commit 'a1d9de304fe63614e3aa8117fef17491fa80093d':
Fix some mismatches between function parameter and doxygen parameter names.
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'e18ba2dfd2d19aedc8afccf011d5fd0833352423':
hwcontext_dxva2: make sure the sw frame format is the right one during transfer
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '9d7026574bbbe67d004a1c32911da75375692967':
hwcontext_dxva2: fix handling of the mapping flags
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
* commit '0d3176e32f351d18d6174d8b05796829a75a4c6b':
hwcontext_dxva2: do not assume the destination format during mapping is always the right one
Merged-by: Hendrik Leppkes <h.leppkes@gmail.com>
Previously, the former form always produced a manually aligned,
padded buffer, while the latter can use DECLARE_ALIGNED, if that
amount of stack alignment is supported.
libavutil/internal.h needs to include mem.h, since it uses
the DECLARE_ALIGNED macro.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '8ea15afbf2c1ec89b5d4bac1f0b8345e4b906a5d':
hwcontext_qsv: transfer data through the child context when VPP fails
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit 'b91ce4860054430d3712deb0d9487cac2fcb7d68':
hwcontext_qsv: do not fail when download/upload VPP session creation fails
Merged-by: Mark Thompson <sw@jkqxz.net>
* commit '99434f4df81b6801b2b535d5b9143305595784f6':
float_dsp: Have implementation match function pointer prototype
Merged-by: Clément Bœsch <cboesch@gopro.com>
These values are defined to be 32bit in the specification,
so it makes more sense to store them as fixed width.
Based on a patch by Micahel Niedermayer <michael@niedermayer.cc>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This disables everything that was deprecated at least 18 months ago.
Readjust the minimum API version as needed, postponing any
API-incompatible changes until the next bump.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
USE_ATOMICS is only set if there is no thread implementation enabled, in
which case you can't expect any lock mechanism from FFmpeg.
This is also conflicting with the incoming use of stdatomic.
Hook up all attributes that don't have a MSVC specific version at the
moment.
See f637046d31 for details.
These don't seem to be critical for building with clang in MSVC mode
though, and thus haven't been hooked up until now.
These seem to build fine with as old clang as 3.3 at least.
(clang 3.3 disguises itself as gcc 4.2 normally, so all of these
have been used for clang before, except for av_cold.)
The clang version numbers themselves are useless for detecting what
attributes are available, since Apple's clang builds use a completely
different versioning (presenting itself as e.g. clang 8.0 instead
of 3.8).
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a follow-up to f637046d31.
Without the noreturn attribute set, avconv_opt.c fails to build after
d2e6dd32a4 with the error "control may reach end of non-void function".
By making sure the noreturn attribute is set properly, this compiles
as intended.
Signed-off-by: Martin Storsjö <martin@martin.st>
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
* commit '4fb311c804098d78e5ce5f527f9a9c37536d3a08':
Drop memalign hack
Merged, as this may indeed be uneeded since
46e3936fb0.
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'f01f7a7846529b7c3ef343f117eaa2c0a1457af0':
hwcontext_dxva2: use the special UC copy for downloading frames
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'd7bc52bf456deba0f32d9fe5c288ec441f1ebef5':
imgutils: add a function for copying image data from GPU mapped memory
Merged-by: Clément Bœsch <u@pkh.me>
These values are defined to be 32bit in the specification,
so it makes more sense to store them as fixed width.
Based on a patch by Micahel Niedermayer <michael@niedermayer.cc>.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Reflects the actual code and silences a gcc warning:
ffprobe.c:1797:42: warning: passing argument 1 of 'av_spherical_tile_bounds' discards 'const' qualifier from pointer target type
* commit '24a362569bff1d4161742fffaca80a4a4428be8a':
buffer: fix av_buffer_realloc() when the data is offset wrt buffer start
Merged-by: Clément Bœsch <u@pkh.me>
* commit 'f79d847400d218cfd0b95f10358fe6e65ec3c9c4':
intreadwrite: Use the __unaligned keyword on MSVC for ARM and x86_64
Merged-by: James Almer <jamrial@gmail.com>
* commit '230b1c070baa3b6d4bd590426a365b843d60ff50':
intreadwrite: Add intermediate variables in the byteswise AV_W*() macros
Mostly a noop. Merged for cosmetic purposes.
See d83ff76ca0
Merged-by: James Almer <jamrial@gmail.com>
Also do some small cosmetic changes: Drop pointless _MMX suffix from ABSD2
macro name, drop pointless check for MMX support, we always assume MMX is
available in our SIMD code, fix spelling.
This fixes building with clang for linux with PIC enabled.
This is cherrypicked from libav commit
8847eeaa14.
Signed-off-by: Martin Storsjö <martin@martin.st>
The Chen-Shapiro(CS) test was used to test normality for
Lagged Fibonacci PRNG.
Normality Hypothesis Test:
The null hypothesis formally tests if the population
the sample represents is normally-distributed. For
CS, when the normality hypothesis is True, the
distribution of QH will have a mean close to 1.
Information on CS can be found here:
http://www.stata-journal.com/sjpdf.html?articlenum=st0264http://www.originlab.com/doc/Origin-Help/NormalityTest-Algorithm
Signed-off-by: Thomas Turner <thomastdt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This reverts commit faa9d29829.
This change became superfluous when support for C11 atomics was introduced.
Reverting it will make the removal of this implementation in an upcoming
merge conflict free.
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The code modifying the buffer on big endian systems was removed.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
Found a case where we use size==0, the other related commits
remain needed, and should be sufficient to fix the original issue
This reverts commit 7e4f32f4e4.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Allow all struct fields to be accessed directly, as long as they're
public.
Before this change, many fields were "public", but could be accessed via
AVOption only. This meant they were effectively not public, but were
present for documentation purposes, which was incredibly confusing at
best.
The size 0 special case causes side data to be created which is
different and a special case if for any reasons size = 0 is passed
Fixes: multiple runtime error: null pointer passed as argument 1, which is declared to never be null
Fixes: 653/clusterfuzz-testcase-5773837415219200
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Originally committed to x264 in 1637239a by Henrik Gramner who has
agreed to re-license it as LGPL. Original commit message follows.
x86: Avoid some bypass delays and false dependencies
A bypass delay of 1-3 clock cycles may occur on some CPUs when transitioning
between int and float domains, so try to avoid that if possible.
The driver is somewhat bitrotten (not updated for years) but is still
usable for decoding with this change. To support it, this adds a new
driver quirk to indicate no support at all for surface attributes.
Based on a patch by wm4 <nfxjfg@googlemail.com>.
D3D9Ex uses different driver paths. This helps with "headless"
configurations when no user logs in. Plain D3D9 device creation will
fail if no user is logged in, while it works with D3D9Ex.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merges Libav commit c2f97f0508.
This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.
The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.
The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Merges Libav commit 04f3bd3496.
D3D9Ex uses different driver paths. This helps with "headless"
configurations when no user logs in. Plain D3D9 device creation will
fail if no user is logged in, while it works with D3D9Ex.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is an extended version of the AVFrame.opaque field, which can be
used to attach arbitrary user information to an AVFrame.
The usefulness of the opaque field is rather limited, because it can
store only up to 32 bits of information (or 64 bit on 64 bit systems).
It's not possible to set this field to a memory allocation, because
there is no way to deallocate it correctly.
The opaque_ref field circumvents this by letting the user set an
AVBuffer, which makes the user data refcounted.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The original code is correctly following the API - vaTerminate() must
be called to free the resources of a VADisplay after it is created by
any of the vaGetDisplay*() calls; it is not necessary to have
successfully called vaInitialize() on it. The segfaults which
prompted this change must therefore be bugs in libva or the driver it
loads.
This reverts commit 3606602f11.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x0000000000aff8a4 in vaTerminate ()
#1 0x0000000000ae50ce in vaapi_device_free (ctx=<optimized out>) at libavutil/hwcontext_vaapi.c:882
#2 0x0000000000ae1f9e in hwdevice_ctx_free (opaque=<optimized out>, data=<optimized out>) at libavutil/hwcontext.c:66
#3 0x0000000000ad856f in buffer_replace (src=0x0, dst=0x7fffa26ef1b8) at libavutil/buffer.c:119
#4 av_buffer_unref (buf=buf@entry=0x7fffa26ef1f8) at libavutil/buffer.c:129
#5 0x0000000000ae299f in av_hwdevice_ctx_create (pdevice_ref=0x170ac50 <hw_device_ctx>, type=type@entry=AV_HWDEVICE_TYPE_VAAPI, device=<optimized out>,
opts=opts@entry=0x0, flags=flags@entry=0) at libavutil/hwcontext.c:494
#6 0x0000000000400968 in vaapi_device_init (device=<optimized out>) at ffmpeg_vaapi.c:223
Signed-off-by: Mark Thompson <sw@jkqxz.net>
