When feeding input RTP packets to the depacketizer via custom IO,
it needs to pick the right stream using the payload type for
RTP packets, and using the SSRC for RTCP packets. If the first
packet is an RTCP packet, we don't (currently) know the SSRC
yet and thus can't pick the right RTP depacketizer to handle it.
By parsing the SSRC attribute in the SDP, we can map initial
RTCP packets to the right stream.
Signed-off-by: Martin Storsjö <martin@martin.st>
Since all URLContexts have the same AVOptions, such AVOptions
will be applied on the outermost context only and removed from the
dict, while they probably make sense on all contexts.
This makes sure that rw_timeout gets propagated to the innermost
URLContext (to make sure it gets passed to the tcp protocol, when
opening a http connection for instance).
Alternatively, such matching options would be kept in the dict
and only removed after the ffurl_connect call.
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Some RTSP servers ("HiIpcam/V100R003 VodServer/1.0.0") respond to
our keepalive GET_PARAMETER request by a truncated RTSP header
(lacking the final empty line to indicate a complete response
header). Prior to 764ec70149, this worked just fine since we
reacted to the $ as interleaved packet indicator anywhere.
Since $ is a valid character within the response header lines,
764ec70149 changed it to be ignored there. But to keep
compatibility with such broken servers, we need to at least
allow reacting to it at the start of lines.
Signed-off-by: Martin Storsjö <martin@martin.st>
packets are queued due to packet reordering until the queue reach its
maximal size or max delay is reached.
This commit adds a warning trace when max delay is reached.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Allow $ as character anywhere within normal RTSP replies - both
within the lines, and as the first character of RTSP header lines.
(The existing old comment indicated that an inline packet could
start at any line within a RTSP reply header, but that doesn't
sound valid to me, and I'm not sure if the existing code
handled that correctly either.)
CC: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the error logging added in 4e54432164.
This avoids warnings about "Invalid interval start specification 'now'"
for live rtsp streams.
We only try to parse some of the many valid values for time ranges
in RTSP - the other ones are fully valid but not interesting for the
use case in rtsp.c, so we shouldn't warn about them.
(Parsing the time ranges is needed to allow seeking, but e.g. setting
the current realtime clock for the start time doesn't make sense.
av_parse_time has got a different mode for parsing absolute times
as well, which can handle the special case "now", but that doesn't
make much sense for this particular use in rtsp.c.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Many of these functions were named foo_free_context, and since
the functions no longer should free the context itself, only
allocated elements within it, the previous naming was slightly
misleading.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is different from how it is handled in codecs/demuxers/muxers
though (where the close function isn't called if the open function
failed), but since the number of depacketizers that have an .init
function is quite limited, this is easy to change.
The main point is that if the init function failed, we shouldn't
try to use that depacketizer at all - this makes sure that the
parse function doesn't need to check for the things that were
initialized in the init function.
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes it more consistent with depacketizers that don't have any
.free function at all, where the payload context is freed by the
surrounding framework. Always free the context in the surrounding
framework, having the individual depacketizers only free any data
they've specifically allocated themselves.
This is similar to how this works for demuxer/muxers/codecs - a
component shouldn't free the priv_data that the framework has
allocated for it.
Signed-off-by: Martin Storsjö <martin@martin.st>
This allows getting rid of quite a bit of boilerplate in depacketizers.
The default value (initializing need_parsing to 0, aka
AVSTREAM_PARSE_NONE) is the same as it is initialized to by default
in AVStream.
Signed-off-by: Martin Storsjö <martin@martin.st>
When a client behind a NAT issues a pause command, and stay paused for a
long time, the router may stop the RTP/RTCP port redirection. Resend the
hole punching packets before each PLAY command to cause the router to
restart the port redirection in that case.
Move the existing code for sending the packets from the SETUP phase
to the PLAY phase.
Signed-off-by: Martin Storsjö <martin@martin.st>
The ones left using av_gettime are NTP timestamps (for RTCP,
which is specified to send the actual current realtime clock
in RTCP SR packets), and the NUT muxer timestamper, which is
documented as using wallclock time.
Signed-off-by: Martin Storsjö <martin@martin.st>
Only copy it manually in the muxers where it makes sense (rtspenc,
sapenc). Don't touch the original AVStream in movenchint, where
the original AVStream should be kept untouched.
This fixes the normal tracks in RTP hinted files after
abb810db - the hint tracks were ok while the normal media tracks
were broken, noticed by Michael Niedermayer.
This reverts abb810db but achieves the same effect for the other
muxers.
Signed-off-by: Martin Storsjö <martin@martin.st>
An SDP description normally only contains the target IP address
and port for the packets. This means that we don't really have
any clue where to send the RTCP RR packets - previously they're
sent to the destination IP written in the SDP (at the same port),
which rarely is the actual peer. And if the source for the packets
is on a different port than the destination, it's never correct.
With a new option, we can choose to send the packets to the
address that the latest packet on each socket arrived from.
---
Some may even argue that this should be the default - perhaps,
but I'd rather keep it optional at first. Additionally, I'm not
sure if sending RTCP RR directly back to the source is
desireable for e.g. multicast.
Signed-off-by: Martin Storsjö <martin@martin.st>
It's only relevant for the RTSP demuxer. Similarly, the custom_io
flag is only present in the SDP demuxer options list.
Signed-off-by: Martin Storsjö <martin@martin.st>
Add support for domain names, for multiple source addresses,
for exclusions, and for session level specification of addresses.
Signed-off-by: Martin Storsjö <martin@martin.st>
This supports inclusion of one single IP address for now,
at the media level. Specifying the filter at the session level
(instead of at the media level), multiple source addresses,
exclusion, or using FQDNs instead of plain IP addresses is not
supported (yet at least).
Signed-off-by: Martin Storsjö <martin@martin.st>
