Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
* qatar/master:
Use proper "" quotes for local header #includes
ppc: fmtconvert: Drop two unused variables.
bink demuxer: set framerate.
Conflicts:
libavcodec/kbdwin.c
libavcodec/ppc/fmtconvert_altivec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '4a4a7e138c92901e04db46a6b05cc6948023e5f5':
rtpenc_chain: Use the original AVFormatContext for getting payload type
rtp: Make sure the output format pointer is set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '57ed8debb9b9cc565cc6e9f98c5b5cbb9f69097c':
wmv2: Propagate the wmv2 idct permutation type to the dsputils context
rtp: Make sure priv_data is set before reading it
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Not sure if this actually happens, but we do the same check when
checking payload_type further above in the function, so it might
be needed.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c44784c9bb9d0ddf5d39d0dfa640816a57b8f457':
rtp: Rename a static variable to normal naming conventions
rtp: Cosmetic cleanup
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a925f723a915bc0255e2673f8817af5212131763':
rtp: Don't read priv_data unless it is allocated
flvenc: Check whether seeking back to the header succeeded
sapenc: Pass the title on to the chained muxers
Conflicts:
libavformat/flvenc.c
libavformat/sapenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes all users of rtpenc_chain (rtsp muxer, sapenc, mov
rtp hinting) work again, broken since 8034130e0.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
bgmc: Fix av_malloc checks in ff_bgmc_init()
rtp: set the payload type as stream id
Conflicts:
libavformat/rtpenc_chain.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtmp: Add credit/copyright to librtmp authors for parts of the RTMPE code
rtmp: Move the CONFIG_ condition into the if conditions
aac: Mention abbreviation as well in long_name
build: Skip compiling rtmpdh.h if ffrtmpcrypt protocol is not enabled
doc: Add Git configuration section
configure: Add a dependency on https for rtmpts
rtp: Only choose static payload types if the sample rate and channels are right
Conflicts:
doc/git-howto.texi
libavformat/rtmpproto.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If using a different sample rate or number of channels, use a dynamic
payload type instead, where the parameters are passed in the SDP.
G722 is a special case where the normal rules don't apply.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (40 commits)
swf: check return values for av_get/new_packet().
wavpack: Don't shift minclip/maxclip
rtpenc: Expose the max packet size via an avoption
rtpenc: Move max_packet_size to a context variable
rtpenc: Add an option for not sending RTCP packets
lavc: drop encode() support for video.
snowenc: switch to encode2().
snowenc: don't abuse input picture for storing information.
a64multienc: switch to encode2().
a64multienc: don't write into output buffer when there's no output.
libxvid: switch to encode2().
tiffenc: switch to encode2().
tiffenc: properly forward error codes in encode_frame().
lavc: drop libdirac encoder.
gifenc: switch to encode2().
libvpxenc: switch to encode2().
flashsvenc: switch to encode2().
Remove libpostproc.
lcl: don't overwrite input memory.
swscale: take first/lastline over/underflows into account for MMX.
...
Conflicts:
.gitignore
Makefile
cmdutils.c
configure
doc/APIchanges
libavcodec/Makefile
libavcodec/allcodecs.c
libavcodec/libdiracenc.c
libavcodec/libxvidff.c
libavcodec/qtrleenc.c
libavcodec/tiffenc.c
libavcodec/utils.c
libavformat/mov.c
libavformat/movenc.c
libpostproc/Makefile
libpostproc/postprocess.c
libpostproc/postprocess.h
libpostproc/postprocess_altivec_template.c
libpostproc/postprocess_internal.h
libpostproc/postprocess_template.c
libswscale/swscale.c
libswscale/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
According to newer RFCs, this packetization scheme should only
be used for interfacing with legacy systems.
Implementing this packetization mode properly requires parsing
the full H263 bitstream to find macroblock boundaries (and knowing
their macroblock and gob numbers and motion vector predictors).
This implementation tries to look for GOB headers (which
can be inserted by using -ps <small number>), but if the GOBs
aren't small enough to fit into the MTU, the packetizer blindly
splits packets at any offset and claims it to be a GOB boundary
(by using Mode A from the RFC). While not correct, this seems
to work with some receivers.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
avconv: add presets
rtsp: Expose the flag options via private AVOptions for sdp and rtp, too
rtsp: Make the rtsp flags avoptions set via a define
rtpenc: Set a default video codec
avoptions: Fix av_opt_flag_is_set
rtp: Fix ff_rtp_get_payload_type
doc: Update the documentation on setting options for RTSP
rtsp: Remove the separate filter_source variable
rtsp: Accept options via private avoptions instead of URL options
rtsp: Simplify AVOption definitions
rtsp: Merge the AVOption lists
lavfi: port libmpcodecs delogo filter
lavfi: port boxblur filter from libmpcodecs
lavfi: add negate filter
lavfi: add LUT (LookUp Table) generic filters
AVOptions: don't segfault on NULL parameter in av_set_options_string()
avio: Check for invalid buffer length.
mpegenc/mpegtsenc: add muxrate private options.
lavf: deprecate AVFormatContext.file_size
mov: add support for TV metadata atoms tves, tvsn and stik
Conflicts:
Changelog
doc/filters.texi
doc/protocols.texi
libavfilter/Makefile
libavfilter/allfilters.c
libavfilter/avfilter.h
libavfilter/formats.c
libavfilter/internal.h
libavfilter/vf_boxblur.c
libavfilter/vf_delogo.c
libavfilter/vf_lut.c
libavformat/mpegtsenc.c
libavformat/utils.c
libavformat/version.h
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
It was broken in 3b3ea34655
"Remove all uses of deprecated AVOptions API", where any
presence of a payload_type AVOption caused its value to
be returned, even if it wasn't set (and thus had the default
-1 value).
This caused the RTP muxer to be broken.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master: (21 commits)
fate: allow testing with libavfilter disabled
x86: XOP/FMA4 CPU detection support
ws_snd: misc cosmetic clean-ups
ws_snd: remove the 2-bit ADPCM table and just subtract 2 instead.
ws_snd: use memcpy() and memset() instead of loops
ws_snd: use samples pointer for loop termination instead of a separate iterator variable.
ws_snd: make sure number of channels is 1
ws_snd: add some checks to prevent buffer overread or overwrite.
ws_snd: decode to AV_SAMPLE_FMT_U8 instead of S16.
flacdec: fix buffer size checking in get_metadata_size()
rtp: Simplify ff_rtp_get_payload_type
rtpenc: Add a payload type private option
rtp: Correct ff_rtp_get_payload_type documentation
avconv: replace all fprintf() by av_log().
avconv: change av_log verbosity from ERROR to FATAL for fatal errors.
cmdutils: replace fprintf() by av_log()
avtools: parse loglevel before all the other options.
oggdec: add support for Xiph's CELT codec
sol: return error if av_get_packet() fails.
cosmetics: reindent and pretty-print
...
Conflicts:
avconv.c
cmdutils.c
libavcodec/avcodec.h
libavcodec/version.h
libavformat/oggparsecelt.c
libavformat/utils.c
libavutil/avutil.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Specifying the payload type is useful when the type number has
already been negotiated before creating the stream, for example
in SIP protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>
* qatar/master:
rtp: factorize dynamic payload type fallback
flvdec: Ignore the index if it's from a creator known to be different
cmdutils: move grow_array out of #if CONFIG_AVFILTER
avconv: actually set InputFile.rate_emu
ratecontrol: update last_qscale_for sooner
Fix unnecessary shift with 9/10bit vertical scaling
prores: mark prores as intra-only in libavformat/utils.c:is_intra_only()
prores: return more meaningful error values
prores: improve error message wording
prores: cosmetics: prettyprinting, drop useless parentheses
prores: lowercase AVCodec name entry
Conflicts:
cmdutils.c
libavcodec/proresdec_lgpl.c
tests/ref/lavfi/pixfmts_scale
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Move the identical code in rtp_write_header() and
ff_sdp_write_media() inside ff_rtp_get_payload_type()
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
