Derived from VLC's http module.
Original authors:
Antoine Cellerier <dionoea@videolan.org>
Sébastien Escudier <sebastien-devel@celeos.eu>
Rémi Duraffort <ivoire@videolan.org>
Rémi Denis-Courmont <remi@remlab.net>
Francois Cartegnie <fcvlcdev@free.fr>
Normally, http servers shouldn't send this to us since we
don't advertise it with an Accept-Encoding header, but some
servers still do it anyway.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'c8f0b20b4a6bb6691928789d83e4b02896969848':
avidec: Let the inner dv demuxer take care of discarding
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '86f042dcabde2a5386dbd95ab0451b274987d253':
wtv: Make WTV_SECTOR_BITS a 64 bit constant
Conflicts:
libavformat/wtv.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This makes sure that values that are left-shifted by this constant
end up casted to 64 bit before shifting, avoiding overflow if the
value ends up larger than 2 GB.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is a minimal change to matroskaenc that implements CueRelativePosition in the output.
Most players will probably ignore this additional information, but it is in the
matroska spec, and it'd be nice to be able to make use of it.
Signed-off-by: Bernt Habermeier <bernt@wulfram.com>
Tested-by: wm4 <nfxjfg@googlemail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This causes a race condition with VLC. Its plausible that other
applications also would have races with it and its just fixing a memleak when
the user application forgets to free the codec. It causes more
problems than it solves in its current form, thus the revert.
Better solutions are welcome
This reverts commit 0f229f9b91.
* commit '36fb0d02a1faa11eaee51de01fb4061ad6092af9':
rtsp: Support multicast source filters (RFC 4570)
rtpproto: Check the source IP if one single source has been specified
rtpproto: Support IGMPv3 source specific multicast inclusion
Conflicts:
libavformat/rtpproto.c
libavformat/rtsp.c
libavformat/rtsp.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This also fixes the case where negative chapter ids where input
And fixes the case where remuxing from mkv changed chapter ids
Found-by: Luca Barbato
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This supports inclusion of one single IP address for now,
at the media level. Specifying the filter at the session level
(instead of at the media level), multiple source addresses,
exclusion, or using FQDNs instead of plain IP addresses is not
supported (yet at least).
Signed-off-by: Martin Storsjö <martin@martin.st>
If another peer is sending unicast packets to the same port that
we are listening on, those packets can end up being received despite
using source specific multicast. For those cases, manually check the
source address of received packets against the intended source address.
This only handles the case when the source list is one single IP
address for now, which probably is the most common case.
Based on a patch by Ed Torbett.
Signed-off-by: Martin Storsjö <martin@martin.st>
Blocking/exclusion is not supported yet.
The rtp protocol parameter takes the same form as the existing
sources parameter for the udp protocol.
Signed-off-by: Martin Storsjö <martin@martin.st>
Passes Source-Specific Multicast parameters read from an sdp file through to the UDP socket code,
allowing source-specific multicast streams to be correctly received. As an integral part of this
change, additional checking (currently only enabled in the case of SSM streams, but probably
useful in similar scenarios) has been added to the RTP protocol handler to distinguish UDP packets
arriving from multiple sources to the same port and process only the expected packets
(those transmitted from the expected UDP source address). This resolves an issue identified
when multiple instances of FFmpeg subscribe to different Source-Specific Multicast streams
but with each sharing the same destination port.
Signed-off-by: Edward Torbett <ed.torbett@simulation-systems.co.uk>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It's the official (or recommended) name for comment/description entries.
See https://www.xiph.org/vorbis/doc/v-comment.html
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Some players, like foobar2000 or modern versions of WMP, create WAV
files using the ITRK tag for track instead of IPRT
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* https://github.com/lukaszmluki/ffmpeg:
ftp: warning about pure-ftp server used as and output
ftp: comments
ftp: remove unused headers
ftp: fix interrupt callback misuse
Merged-by: Michael Niedermayer <michaelni@gmx.at>
FTP protocol used interrupt callback to simulate nonblock
operation which is a misuse of this callback.
This commit make FTP protocol fully blocking and removes
invalid usage of interrutp callback
Also adds support for multiline responses delimited with dashes
Tags must have at least one SimpleTag element to be spec conformant.
Updated lavf-mkv and seek-lavf-mkv FATE references as the tests were affected by
this.
Fixes ticket #2785
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit '31931520df35a6f9606fe8293c8a39e2d1fabedf':
mov: Do not allow updating the time scale after it has been set
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '5b4eb243bce10a3e8345401a353749e0414c54ca':
mov: Seek back if overreading an individual atom
Conflicts:
libavformat/mov.c
See: 6093960ae3
Merged-by: Michael Niedermayer <michaelni@gmx.at>
If either of the deltas is too large for the multiplications to
succeed, don't use this for setting the avg frame rate.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
The time scale is set in mdhd, and later validated in the
enclosing trak atom once all of its children have been parsed.
A loose mdhd atom outside of a trak atom could update the time
scale of the last stream without any validation.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '1dd1b2332ebbac710d8e0214cec7595e118f2105':
rtsp: Include an User-Agent header field in all requests
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* cehoyos/master:
Suggest recompilation with openssl or gnutls if the https protocol is not found.
lavf/utils.c: Avoid a null pointer dereference on oom after duration_error allocation.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
avconv uses private and internal fields from libavformat, we thus must
match the layout even of the fields marked non public.
Otherwise ffmpegs libavformat could not be used as a dropin replacement
on debian/ubuntu
The current soname of libavformat was not part of any release nor are any
fields marked public moved thus in theory
no installed shared lib ABI breakage should occur. Still the need for this
change is unfortunate and chilling.
If you installed shared libs from a recent development version of libavformat
that is more recent than the last release. You probably want to check or rebuild
applications that linked to it.
minor versions of avformat & avdevice are bumped to allow detecting this
as both use the updated struct
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'a87a0acf9b5d27aad032e61eef4973e62a4a6830':
movenc: Make sure the RTP hint tracks have nondecreasing DTS
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The Matroska muxer now allows WebVTT subtitle tracks to be written
while in WebM muxing mode.
WebVTT subtitle tracks have four kinds: "subtitles", "captions",
"descriptions", and "metadata". Each text track kind has a distinct
Mastroska CodecID and track type, as described in the temporal
metadata guidelines here:
http://wiki.webmproject.org/webm-metadata/temporal-metadata/webvtt-in-webm
When the stream has codec id AV_CODEC_ID_WEBVTT, the stream packet is
serialized per the temporal metadata guidelines cited above. The
WebVTT cue is written as a Matroska block group. The block frame
comprises the WebVTT cue id, followed by the cue settings, followed by
the cue text. (The block timestamp is synthesized from the cue
timestamp.)
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows to read a live isml movie and segment it using the
smoothstreaming muxer, which requires the bitrates to be known for each stream.
Signed-off-by: Alexandre Sicard <alexandre.sicard@smartjog.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The RTP timestamps can be decreasing for codecs with B-frames. For
these cases, make sure the timestamps in the MP4 file track itself
are nondecreasing, and add an offset to the RTP packet hint instead
to produce the intended RTP timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'f054e309c58894450a5d18cce9799ef58aab9f14':
qdm2: use init_static_data
westwood_vqa: do not free extradata on error in read_header
Conflicts:
libavformat/westwood_vqa.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes speex in rtmp
Fixes Ticket2409
the nellymoser in flv case actually needs larger analyzeduration. The code
previously just failed to calculate the duration
If this causes any problems, like premature analyze/probe end, please report!
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This fixes crashes when playing back certain RealRTSP streams.
When invoked from the RTP depacketizer, the full realmedia
demuxer isn't invoked, but only certain functions from it, where
a separate AVIOContext is passed in as parameter (for the buffer
containing the data to parse). The functions called from within
those entry points should only be using that parameter, not
s->pb. In the depacketizer case, s is the RTSP context, where ->pb
is null.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes sure the ffurl_read_complete function actually
returns the number of bytes read, as the documentation of the
function says, even if the underlying protocol uses AVERROR_EOF
instead of 0.
Signed-off-by: Martin Storsjö <martin@martin.st>
A sid 0 would be mismatched to the attachment.
Prevent NULL pointer dereference.
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
* commit '6516632967da5e6bd7d6136e8678f826669ed26e':
tests: Only run noproxy test if networking is enabled
fifo: K&R formatting cosmetics
Conflicts:
libavformat/Makefile
libavutil/fifo.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
start_granule should be applied to the stream referenced in the fisbone packet, not to the
Skeleton stream.
This was broken in d1f05dd183 and produced bogus warnings about
multiple fisbone in the same stream on files with more than one stream.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The toc is inexact and not using it can thus make sense.
Using it is faster though, thus the opposite can similarly makes sense
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This should be closer to how tcp behaved longer ago and should
fix the issue with idle connections timing out.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The method guess_ni_flag needs to divide timestamps in the index
by sample_size if it is set in order to compare different streams correctly.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Data is appended in fill_buffer() when there is sufficient space left
and the data pointer only reset when needed.
Previously the data pointer was more often reset, loosing more seekback
space than otherwise needed.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The sample from ticket #2691 currently does not trigger "Consider increasing
the value for analzeduration and probesize" because the audio streams are
only added after calling estimate_timings(). Attached patch moves the message
below this function call.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
oggdec: do not fall back on binary search in the generic code.
Conflicts:
libavformat/oggdec.c
tests/ref/seek/lavf-ogg
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Allow applications to request reading streamcast metadata. This uses
AVOptions as API, and requires the application to explicitly request
and read metadata. Metadata can be updated mid-stream; if an
application is interested in that, it has to poll for the data by
reading the "icy_metadata_packet" option in regular intervals.
There doesn't seem to be a nice way to transfer the metadata in a nicer
way. Converting the metadata to ID3v2 tags might be a nice idea, but
the libavformat mp3 demuxer doesn't seem to read these tags mid-stream,
and even then we couldn't guarantee that tags are not inserted in the
middle of mp3 packet data.
This commit provides the minimum to enable applications to retrieve
this information at all.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
* cehoyos/master:
Support compilation on aix with gcc.
Rename "AVClass class" as "AVClass component_class".
Rename constant FRAMESIZE in ra144 codec as FRAME_SIZE.
Rename thread_init() in libavcodec and libavfilter as library_thread_init().
Rename constant HZ in af_biquads.c as HERTZ.
Drop local lable from ppc asm timer.
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The code that copies any extradata from the MXFDescriptor to the codec does
not set the size, which it should otherwise the copied data is useless.
Attached it a patch to correct this.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This is part of normal operation with some formats. A warning should
indicate that something is wrong, and the documentation for AV_LOG_WARNING
says: "Something somehow does not look correct."
Since this message is most likely useful for debugging only, raise the
log level accordingly.
Plus-one-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
WebVTT subtitle tracks have four kinds. Certain downstream muxers
(such as for WebM) need to know which WebVTT kind this is, in order to
specify the codec id of the output track.
A new private input option, "-kind", has been added to the WebVTT
demuxer. It accepts as a value any of "subtitles" (the default),
"captions", "descriptions", and "metadata". The kind option value is
used to assign a value to the stream disposition flag, to which four
new values have been added, corresponding the four WebVTT kinds.
Signed-off-by: Matthew Heaney <matthewjheaney@google.com>
Signed-off-by: Clément Bœsch <ubitux@gmail.com>
There are 4 separate WebVTT text track kinds: subtitles (the default
if not otherwise specified), captions, descriptions, and metadata.
The WebM muxer needs to know which WebVTT text track kind this is, in
order to synthesize the correct track type and codec id.
To allow a demuxer to indicate the text track kind of the input, a new
set of AV_DISPOSITION flag values has been added, corresponding to
each of the non-default text track kind values.
* qatar/master:
lavf: don't abort if both encoder and muxer aspect ratios are not set
Conflicts:
libavformat/mux.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'c3e58f8fb75d8467161a65b85eb88281547ebab1':
matroskaenc: restore compatibility with non referenced AVPacket
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Avisynth is a non-unicode application and cannot accept UTF-8
characters. Therefore, the input filename should be converted to
the code page that it expects.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
This ensures that theres enough data for mpeg_probe() to recognize mpeg-ps
Fixes Ticket2583
Based on code by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
It is notably known to break playback on http streaming servers who use
the user agent to guess if it's a browser (to display a summary) or a
player (to stream the audio data).
This reverts 1fabd95.
Fixes Ticket #2663.
* commit '58c95448e42d34910b939363949ba1a92c06b0b0':
smacker: pad the extradata allocation
Conflicts:
libavformat/smacker.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'df9f22d42b0905385629a9d368bb5a1eef2b45ef':
avf: move url utility functions in a separate file
Conflicts:
libavformat/internal.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'afc8685395e775fe0f2a1698b683aea4afd124af':
avf: split off format register and lookup function
Conflicts:
libavformat/utils.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '42d73f7f6bea0ee0f64a3ad4882860ce5b923a11':
4xm: do not overread while parsing header
Conflicts:
libavformat/4xm.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
This fixes#2657.
ISML movies produced by Microsoft Expression Encoder 4 seem to have invalid
sample entries in their trun/tfhd for data tracks. As a result, too much bytes
are read for these tracks to the point that next_root_atom can go out of
buffer, which makes the encoding fail if the input is not seekable.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
This allows handling matroska files with errors.
Fixes test4.mkv and test7.mkv from the official Matroska test suite,
and by extension Bugzilla #62.
Based on a patch by Reimar Doffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
554 is possible invalid code:
- Restart not valid
- Command terminated due to server shutdown in progress
- etc...
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
It seems some ftp servers doesn't respect ABOR command,
but closing both connection is slow.
This commit keeps control connection open when possible.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
This commit reconnect both connections and retries before ftp_read returns an error.
Practical use case: resume after lock screen on iOS devices.
Signed-off-by: Lukasz Marek <lukasz.m.luki@gmail.com>
Some movies have negative composition time offsets in their trun, causing pts <
dts errors. This patch makes use of dts_shift to handle them.
Signed-off-by: Alexandre Sicard <alexandre.sicard@smartjog.com>
* commit 'ab1189766a82a95f108005463cde75f73fcc0ae5':
movenc: Increase the cluster array allocation by doubling
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '3b4feac1ec14f861bdd7f494f288f4d8dd7f449e':
movenc: Keep track of the allocated size for the cluster array
mem: Add av_realloc_array and av_reallocp_array
Conflicts:
doc/APIchanges
libavformat/movenc.c
libavutil/mem.c
libavutil/mem.h
libavutil/version.h
Merged-by: Michael Niedermayer <michaelni@gmx.at>
The previous allocation increment of 16384 meant that the cluster
array was allocated for 0.6 MB initially, which is a bit excessive
for cases with fragmentation where only a fraction of that ever
actually is used.
Therefore, start off at a much smaller value, and increase by
doubling (to avoid reallocating too often when writing long
non-fragmented mp4 files).
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
When writing fragmented mp4, the cluster array is reset when a
fragment is written. Instead of starting off reallocating the
array only based on the number of current elements in it, keep
track of how many elements there were allocated earlier.
This avoids reallocating this array needlessly when writing
fragmented mp4 files.
Bug-Id: 525
Signed-off-by: Martin Storsjö <martin@martin.st>
This makes the struct name (which isn't used anywhere) match the
name of the typedef, as for all the other structs declared in this
header.
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit '28306e6d620c109ddd672f7243adfbc2bbb3b18f':
network: factor out bind-listening code
use my full first name instead of short one in copyrights
Conflicts:
libavformat/tcp.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Currently the WebVTT demuxer parses the cues but throws away
the cue id (the optional first line of the cue) and cue
settings (the optional rendering instructions that follow
the timestamp).
However, in order to write inband text tracks (to WebM
files), the entire cue payload from the WebVTT source must
be preserved.
This commit makes no change to the data part of the output
buffer packet (where the actual cue text is stored), but
does add the cue id and settings as a side data items, if
they're present in the cue. Existing code that cares only
about the data part of the packet can continue to ignore the
side data.
There are two new packet data type flags,
AV_PKT_DATA_WEBVTT_IDENTIFIER and
AV_PKT_DATA_WEBVTT_SETTINGS.
Since we don't check for seek table integrity in the decoder anymore,
check it in the demuxer instead (Only tta files are guaranteed to have
one, and it should be valid there).
Check also for header integrity, since the check done in the decoder
is ignored because matroska doesn't store the header at all.
Signed-off-by: James Almer <jamrial@gmail.com>
ABOR command usually takes long (FTP server implementation dependent).
It also produces different response codes from different servers.
It is save for ffmpeg to reconnect both connection during seek for two reasons:
1. Alreay mentioned heavy manner of ABOR command.
2. Server may disconnected due to no transfer (seek after a long pause in ffmpeg client)
Reimplementation of ftp_status function.
New version requires explicit list of expected codes.
It flush data connection input before sending a command
and blocks until expected result appears.
Adding an arbitrary amount of padding bytes at the end of the
ID3 metadata fixes cover art display for some software (iTunes,
Traktor, Serato, Torq).
For reference (ID3 metadata):
[ Apic frames ] -> cover doesn't show up
[ Apic frames, Padding ] -> ok
[ Apic frames, ID3 frames ] -> ok
[ ID3 frames, Apic frames ] -> cover doesn't show up
[ ID3 frames, Apic frames, Padding ] -> ok
* commit '2d2d6a4883479403798f4ed46941d5b365823570':
lavf: add a raw WavPack muxer.
apetag: add support for writing APE tags
matroskaenc: support muxing WavPack
Conflicts:
libavformat/Makefile
libavformat/allformats.c
libavformat/apetag.h
libavformat/version.h
libavformat/wvenc.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '794ca87d2bff2513118de8b97595b3e23070e67d':
wvdec: split block header parsing into a separate file
Conflicts:
libavformat/Makefile
libavformat/wvdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
