When use append_list mode, the hls_init_time set nouse,
Because the append_list only support append at the old m3u8 end
cannot set init segments durations at the middle of the list.
That's invalid. and show a warning message for user.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
cyrpto allows reading of data which has been aes-128-cbc encrypted given a key and an iv. But it did not handle filetypes which require seeking... e.g. it failed on an encrypted .mp4 file.
example:
take 25.mp4 created with:
ffmpeg -f lavfi -i sine=frequency=1000:beep_factor=2:r=48000:duration=720.0 -f lavfi -i testsrc=duration=720.0:rate=25 -vcodec libx264 -cmp 22 -timecode 10:00:00:00 -r 25 -y out\25.mp4
encrypt with:
openssl enc -aes-128-cbc -K 12345678901234567890123456789012 -iv 12345678901234567890123456789012 -in 25.mp4 -out 25.enc
then to transcode in ffmpeg:
ffmpeg -key 12345678901234567890123456789012 -iv 12345678901234567890123456789012 -i crypto:25.enc -vcodec mpeg4 -r 25 -y 25dec.mp4
prior to this modification, the transcode would fail.
Note also: crypto previously maked both reads and writes as streamed, which caused the whole file
to be read before the transcode started. Now, for read only, if the underlying layer is not marked as streamed,
then crypto is not. This should enable efficient reading of encrypted containers which require seeking.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
the current implementation reads in chunks of 149x16=2384 bytes.
Seems more logical for it to read in chunks of 4096
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
A number of new pix_fmts have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA*
10-, 12-, 14-, and 16-bit GRAY variants*
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY*
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
recover segments duration time by hls_time after init hls window.
This is reuqested by Ibrahim Tachijian
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
av_log() expects its first parameter to be a pointer to a struct whose
first element is a pointer to an AVClass. In what I can only imagine is
a typo, one call to av_log() in the AAX decryption code instead passes
a pointer to an AVSHA struct, which doesn't even contain a pointer as
its first element, much less a pointer to an AVClass. Change the call to
pass the current MOVContext, as surrounding calls do.
The incorrect AVClass was causing mpv to emit the warning "av_log
callback called with bad parameters" when playing an .aax file.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Use proper ISO 8601 timestamps which also signal that they are in UTC.
This changes the format of creation_time and modification_date metadata values
from 2016-06-01 22:30:00 to 2016-01-01T22:30:00.000000Z
Fixes ticket #5673.
Signed-off-by: Marton Balint <cus@passwd.hu>
Milliseconds is the de-factor precision for timestamps in
Matroska/WebM media.
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Now force_codec_ids supports AVMEDIA_TYPE_DATA and
avformat_query_codec accepts data codecs as well in addition to video,
audio and subtitle tracks.
Signed-off-by: Erkki Seppälä <erkki.seppala.ext@nokia.com>
Signed-off-by: OZOPlayer <OZOPL@nokia.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Restore original timestamps in write_packet() if the
actual write operation was not successfull. This allows
to pass the same packet to nonblocking muxer repeatedly
without corrupting the timestamps.
Signed-off-by: Jan Sebechlebsky <sebechlebskyjan@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 049fdf78565f1ce5665df236d90f8657/asan_heap-oob_10a5a97_1026_42f9d4855547329560f385768de2f3fb.wtv
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When ffmpeg exit by exception, start a new ffmpeg will
cover the old segment list, add this flag can continue
append the new segments into old hls segment list
Signed-off-by: LiuQi <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This change relaxes the whitelist on reading color metadata in MOV/BMFF
containers. The whitelist on writing values is still in place.
As a consequence it also fixes an apparent bug in reading 'nclc' values.
The 'nclc' spec [1] is in harmony with ISO 23001-8 for the values it
lists, but the code getting removed was remapping 5->6 and 6->7 for
primaries, which is incorrect, and was remapping 6->5 for color matrix
("colorspace" in the code), which is equivalent but an unnecessary
inconsistency. This logic error doesn't appear in movenc.
Removing the whitelist allows proper conversion when the source codec
relies on the container for proper signaling of newer codepoints, such
as DNxHR and VP9. If converting to a codec or container that has updated
its spec to include the new codepoints, the metadata will be preserved.
If going back to MOV/BMFF, the output whitelist will still kick in, so
this won't result in out-of-spec files being created.
[1] https://developer.apple.com/library/mac/technotes/tn2162/_index.html
Signed-off-by: Steven Robertson <steven@strobe.cc>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes out of array read
Fixes: 13262c363a28da8d6bdcc472aed6e9dc/asan_heap-oob_cfb5e2_3733_31cf3fcc783295c34222eb070a784f84.3gp
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Instead of silently ignoring the content_type option in listen mode,
apply its value to the provided "Content-Type:" header.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Instead of silently ignoring the headers option in listen mode, use
the provided headers.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The values don't need to be hardcoded since the correct values are
returned by avs_bits_per_pixel.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Enable the MXF muxer to mux baseline H.264 video streams.
Signed-off-by: Matthias Hunstock <atze@fem.tu-ilmenau.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also set a default_whitelist for mmsh and ffrtmphttp.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This will be used to allow writing file sequences using the tee output onto
multiple places in parallel
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
