For cases with dual stack (IPv4 + IPv6) connectivity, but where one
stack potentially is less reliable, strive to trying to connect over
both protocols in parallel, using whichever address connected first.
In cases with a hostname resolving to multiple IPv4 and IPv6
addresses, the current connection mechanism would try all addresses
in the order returned by getaddrinfo (with all IPv6 addresses ordered
before the IPv4 addresses normally). If connection attempts to the
IPv6 addresses return quickly with an error, this was no problem, but
if they were unsuccessful leading up to timeouts, the connection process
would have to wait for timeouts on all IPv6 target addresses before
attempting any IPv4 address.
Similar to what RFC 8305 suggests, reorder the list of addresses to
try connecting to, interleaving address families. After starting one
connection attempt, start another one in parallel after a small delay
(200 ms as suggested by the RFC).
For cases with unreliable IPv6 but reliable IPv4, this should make
connection attempts work as reliably as with plain IPv4, with only an
extra 200 ms of connection delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
H264/265 have been fixed such an issue with commit
559370f2c4.
Similar fixing is needed for other codecs.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Solve some issues found by an automated code scansion.
Suppress the complain "variables 'handle' is used but maybe
uninitialized".
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Previously, AVERROR(EIO) was returned on failure of
http_open_cnx_internal(). Now the value is passed to upper level, thus
it is possible to distinguish ECONNREFUSED, ETIMEDOUT, ENETUNREACH etc.
Signed-off-by: Martin Storsjö <martin@martin.st>
we need to make sure that memory allocation for Y/UV planes is continuous and re-used from a
pool
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Some callers (like do_subtitle_out(), or do_streamcopy()) call this
with an AVPacket that is not refcounted. This can cause undefined
behavior.
Calling av_packet_move_ref() does not make a packet refcounted if it
isn't yet. (And it can't be made to, because it always succeeds,
and can't return ENOMEM.)
Call av_packet_ref() instead to make sure it's refcounted.
Cc: libav-stable@libav.org
Signed-off-by: Martin Storsjö <martin@martin.st>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
1. vcm mode is only available for H264.
2. vcm is not supported on Linux, but it is shown when run "./avconv -h
encoder=h264_qsv |grep vcm". This shouldn't happen.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Use a common way to control target_usage, keeping consistent with vaapi
encoders. The private option preset is kept only for compatibility.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Provide proper aliases to enable/disable MFE.
The numeric values are ambiguous and misleading (e.g: user may misunderstand
setting mfmode to 1 is to enable MFE but actually it is to disable MFE, and
set it to be 5 or above is meaningless).
MFX_MF_MANUAL hasn't been exposed since it is to be implemented.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This fixes frame corruption issue when decoder started reusing frames
while they are still in use of encoding process
Issue with frame corruption was reproduced using:
avconv.exe -y -hwaccel d3d11va -hwaccel_output_format d3d11 -i input.h264 -an -c:v h264_amf output.mkv
It is recommended to use -extra_hw_frames 16 option in case if hw frames
number in pool is not enough
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Remove the wincrypt API calls since we don't support XP anymore and
bcrypt is available since Vista, even on Windows Store builds.
Signed-off-by: Martin Storsjö <martin@martin.st>
This removes the XP compatibility code, and switches entirely to SRW
locks, which are available starting at Windows Vista.
This removes CRITICAL_SECTION use, which allows us to add
PTHREAD_MUTEX_INITIALIZER, which will be useful later.
Windows XP is hereby not a supported build target anymore.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Set the flag MFX_BITSTREAM_COMPLETE_FRAME when it is a progressive picture.
This can fix vc1 decoding segment fault issues because can't set the start
code correctly.
See: ./avconv -hwaccel qsv -c:v vc1_qsv -i /fate-suite/vc1/SA00040.vc1
-vf "hwdownload, format=nv12" -f rawvideo /dev/null
v2: fix some h264 interlaced clips regression
a. field_order of some h264 interlaced video (e.g: cama3_vtc_b.avc) is marked as AV_FIELD_UNKNOWN
in h264_parser.c. This is not a completed frames.
So only set the MFX_BITSTREAM_COMPLETE_FRAME when it is progressive.
b. some clips have both progressive and interlaced frames (e.g.CAPAMA3_Sand_F.264),
the parsed field_order maybe changed druing the decoding progress.
This patch has been verified for other codecs(mpeg2/hevc/vp8).
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Currently vpp pipeline is always created, even for the unnecessary
cases such as setting the option "vpp_qsv=w=1280:h=720" for an input
with native resolution 1280x720. Thus introduces unnecessary performance
dropping, so bypass vpp if not needed.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Currently pict_type and key_frame are unset.
Add an extra param to fetch the picture type from qsv decoder
The judgement “key frame is equal to IDR frame” only suitable for H264.
For HEVC, all IRAP frames are key frames, and other codecs have no IDR
frame.
Signed-off-by: ChaoX A Liu <chaox.a.liu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
