The range parameters need to be set up before calling
sws_init_context (which selects which fastpaths can be used;
this gets called by sws_getContext); solely passing them via
sws_setColorspaceDetails isn't enough.
This fixes producing full range YUV range output when doing
YUV->YUV conversions between different YUV color spaces.
Signed-off-by: Martin Storsjö <martin@martin.st>
The sample mpeg4/mpeg4_sstp_dpcm.m4v existed in the FATE-suite,
but it was surprisingly unused.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This long-existing feature calculates subtitle durations by keeping
it around until the following subtitle is decoded, and then utilizes
the following subtitle's pts as the end point of the previous one.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Peeking into the muxing queue can improve the estimate of
the lowest timestamp needed for avoid_negative_ts in case
the lowest timestamp is in a packet other than the first packet
to be muxed.
This fixes tickets #4536 and #5784 as well as the output from
the matroska-avoid-negative-ts FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
write_packet() has code to shift the packets timestamps
to make them nonnegative or even make them start at ts zero;
this code inspects every packet that is written and if a packet
with negative timestamp (whether this is dts or pts depends upon
another flag; basically: Matroska uses pts, everyone else dts)
is encountered, this is offset to make the timestamp zero.
All further packets will be offset accordingly (with the offset
converted according to the streams' timebases).
This is based around an assumption, namely that the timestamps
are indeed non-decreasing, so that the first packet with negative
timestamps is the first packet with timestamps. This assumption
is often fulfilled given that the default interleavement function
by default interleaves per dts; yet there are scenarios in which
it may not be fulfilled:
a) av_write_frame() instead of av_interleaved_write_frame() is used.
b) The audio_preload option is used.
c) When the timestamps that are made nonnegative/zero are pts
(i.e. with Matroska), because the packet with the smallest dts
is not necessarily the packet with the smallest pts.
d) Possibly with custom interleavement functions.
In these cases the relative sync of the first few packet(s) is offset
relative to the later packets. This contradicts the documentation
("When shifting is enabled, all output timestamps are shifted by
the same amount").
Therefore this commit changes this: As soon as the first packet
with valid timestamps is output, it is checked and recorded whether
the timestamps need to be shifted. Further packets are no longer
checked for needing to be offset; instead they are simply offset.
In the cases above this leads to packets with negative timestamps
(and the appropriate warnings) instead of desync. This will mostly
be fixed in the next commit.
This commit also factors handling the avoid_negative_ts stuff out
of write_packet() in order to be able to return immediately.
Tickets #4536 and #5784 as well as the matroska-avoid-negative-ts-test
are examples of c); as has been said, some timestamps are now negative,
yet the ref file update does not show it because ffmpeg.c sanitizes
the timestamps (-copyts disables it; ffprobe and mkvinfo also show
the original timestamps).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This tests the issue from tickets #4536, #5784;
the output of this test is currently broken.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Tests the parsing and writing of AVDOVIDecoderConfigurationRecord,
when it is present as a Dolby Vision configuration block addition mapping.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To trigger this bug, use `paletteuse=dither=bayer:bayer_scale=0`; you will see
that adjacent pixel lines will use the same dither pattern, instead of being
shifted from each other by 32 units (0x20).
One way to demostrate the bug is:
$ convert -size 64x256 gradient:black-white -rotate 270 grad.png
$ echo 'P2 2 1 255 0 255' > bw.pnm
$ ffmpeg -i grad.png -filter_complex 'movie=bw.pnm,scale=256x1[bw]; [0:v][bw]paletteuse=dither=bayer:bayer_scale=0' gradbw.png
Previously: https://www.rm.cloudns.org/img/uploaded/0bd152c11b9cd99e5945115534b1bdde.png
Now: https://www.rm.cloudns.org/img/uploaded/89caaa5e36c38bc2c01755b30811f969.png
This was caused by passing inconsistent color vs (a,r,g,b) parameters to
color_get(), and NBITS being 5 meaning actually hitting the same cache node
does happen in this case, but ONLY if bayer_scale is zero.
The fix is passing the correct color value to color_get().
Also added a previous-failing FATE test; image comparison of the first frame:
Previously: https://www.rm.cloudns.org/img/uploaded/d0ff9db8d8a7d8a3b8b88bbe92bf5fed.png
Now: https://www.rm.cloudns.org/img/uploaded/a72389707e719b5cd1c58916a9e79ca8.png
(on this less synthetic test image, the bug basically causes noise from cache
hits vs misses)
Tested: FATE passes, which exercises this filter but at the default bayer_scale.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All the AMRWB samples are in a mov container.
Also use FATE_SAMPLES_FFMPEG instead of FATE_SAMPLES_AVCONV.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To avoid the ref for this growing to a very large size when attaching
the parsed RPU side data. Since this sample does not have any dynamic
metadata, two frames will serve just as well as 100.
Signed-off-by: Niklas Haas <git@haasn.dev>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They test libavfilter internal API, so they should be libavfilter
test programs (which implies: linked statically to libavfilter
to access internal APIs and linked normally (statically or dynamically
depending upon the build configuration) against all the other libs).
Right now, they are always linked statically against all libs,
which is a significant size waste compared to shared libs as all
of libavcodec has been pulled in despite not being really used.
This also leads to linking failures on systems for which av_export_avutil
is intended: libavcodec does not expect to be linked statically
against the library providing avpriv_(cga|vga16)_font in this case.
This is fixed by this commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes FATE failures if e.g. libavdevice is disabled.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The mpeg4 encoder is slice-threaded and its output depends upon
the number of threads used. Therefore all tests of this encoder
use a hardcoded number of threads (ENC_OPTS in fate-run.sh contains
"-threads 1"; only the vsynth%-mpeg4-thread tests override this
for the mpeg4 encoder, but they also use a hardcoded value to
be consistent across different systems); only the new shortest
and copy-shortest[12] (implicitly due to the sample used) tests
don't and this leads to FATE-failures.
Fix this by explicitly setting the thread count.
Also switch the shortest test to framecrc, because hashing side data
is itchy even though the side data used here (AV_PKT_DATA_QUALITY_STATS)
has a defined endianness.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also covers muxing and demuxing of nonstandard FLAC channel layouts
and the multi-dim-quant option of the FLAC encoder
(all of which was hitherto uncovered).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Provides coverage for the muxer.
(Thanks to tresh for modifying the whitespace commit hook
to allow to push this ref file with tabs.)
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It uses the test-lrc.lrc sample which was added years ago, but never
used until now.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This information is coded in a standard MP4 KindBox and utilizes the
scheme and values as per the DASH role scheme defined in MPEG-DASH.
Other schemes are technically allowed, but where multiple schemes
define the same concepts, the DASH scheme should be utilized.
Such flagging is additionally utilized by the DASH-IF CMAF ingest
specification, enabling an encoder to inform the following component
of the roles of the incoming media streams.
A test is added for this functionality in a similar manner to the
matroska test.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
They already uncovered an uninitialized-value bug in the ATRAC3 code
in the demuxer; and provide coverage for ID3v2.3.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The current name comes from a time in which libavcodec/utils.c
contained the whole core of libavcodec.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When a color indexing transform with 16 or fewer colors is used,
WebP uses "pixel packing", i.e. storing several pixels in one byte,
which virtually reduces the width of the image (see WebPContext's
reduced_width field). This reduced_width should always be used when
reading and applying subsequent transforms.
Updated patch with added fate test.
The source image dual_transform.webp can be downloaded by cloning
https://chromium.googlesource.com/webm/libwebp-test-data/
Fixes: 9368
Signed-off-by: James Zern <jzern@google.com>
This muxer was untested up until now; had it been tested, it would
have been obvious that it has been broken for years.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
And remove the unnecessary ffmpeg dependencies while at it.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes trac issue #7473.
Removes encoder delay (skip samples) and writes remaining frame samples after EOF to get correct sample count.
Output is now accurate vs players that use Microsoft's codecs (Windows Media Format Runtime).
Tested vs encode>decode WMAv2 with MS's codecs and most sample rate/bit rate/channel/mode combinations in ASF/XWMA.
WMAv1 appears to use the same delay, from FFmpeg samples.
Signed-off-by: bnnm <bananaman255@gmail.com>
subtitles.mak's fate-sub tests utilize a more strict comparator
("rawdiff"), which causes the tests fail in case of white space
differences, such as CRLF vs LF. This in turn causes these
ffprobe-using TTML-in-MP4 tests to fail on non-LF systems such as
Windows or wine.
Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also adapt some FATE tests to already cover this.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds schema validation for ffprobe XML output so that updating the
ffprobe.xsd file upon changes to ffprobe is not forgotten. This was
suggested by Marton Balint in:
http://ffmpeg.org/pipermail/ffmpeg-devel/2021-March/278428.html
The schema FATE test is only run if xmllint command is available.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
After fixing AV_PKT_DATA_SKIP_SAMPLES for reading vorbis packets from ogg,
the actual decoded samples become fewer. Three fate tests are failing:
fate-vorbis-20:
The samples in 6.ogg are not frame aligned. 6.pcm file was generated by
ffmpeg before the fix. After the fix, the decoded pcm file does not match
anymore. Ideally the ref file 6.pcm should be updated but it is probably
not worth it including another copy of the same file, only smaller.
SIZE_TOLERANCE is added for this test case.
fate-webm-dash-chapters:
The original vorbis_chapter_extension_demo.ogg is transmuxed to dash-webm.
The ref file webm-dash-chapters needs to be updated.
fate-vorbis-encode:
This exposes another bug in the vorbis encoder that initial_padding is not
correctly set. It is fixed in the previous patch.
Signed-off-by: Guangyu Sun <gsun@roblox.com>
The twoloop coder is highly loaded with (pseudo-)perceptual metrics,
and the aim of the tests is to piece-wise test each function of the
encoder, for which the 'fast' coder is perfect, since it only decides
on which scalefactors to use, rather than enable or disable encoder
features.
This simply performs a 2nd pass if a LSE is encountered with GRAY8
Fixes: tickets/3933/128.jls
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This sadly required making changes to the code itself,
due to the same context needing to be reused for both versions.
The lookup table had to be duplicated for both versions.
Notice that the order of the APIC tracks is currently wrong. This is
a superposition of two bugs: (i) Both muxers write the attached
pictures in the order they arrive in the muxer and not in the
stream_index order, leading to attached pictures that are copied being
written earlier because their timestamp is AV_NOPTS_VALUE, whereas the
timestamp of the encoded pictures is 0. (ii) A bug in the id3v2 parsing
code reverses the order of the parsed pictures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically test that the WebVTT flavour is correctly mapped to
the Matroska/WebM CodecID and back; and test that dispositions
unsupported by WebM are discarded even when they would be supported
by Matroska.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This makes av_read_frame() return packets with proper timestamps.
As a result, seeking now works in combination with streamcopy.
A FATE-test for this has been added.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The test sample has to have no file extension, otherwise probing
happens to work, based off file extension alone, and we want to
test the actual probing function.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Enables writing TTML documents or encoded TTML paragraphs as such
documents.
Additionally, a test for the combined TTML encoder and muxer has
been added to validate that the components still work.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Some FATE tests use files created by other FATE tests as input files;
this mostly affects the seek tests which use files from vsynth_lena as
well as acodec-pcm as input files. In order to make this possible the
temporary files of all the vsynth* and all acodec-pcm tests are kept.
Yet only a fraction of these files are actually used. This commit
changes this to only keep the files that are actually needed for other
tests. This reduces the size of the tests/data/fate folder after a full
FATE run from 2024727441B to 138739312B.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AVID streams - currently handled by the AVRN decoder - can be (depending
on extradata contents) either MJPEG or raw video. To decode the MJPEG
variant, the AVRN decoder currently instantiates a MJPEG decoder
internally and forwards decoded frames to the caller (possibly after
cropping them).
This is suboptimal, because the AVRN decoder does not forward all the
features of the internal MJPEG decoder, such as direct rendering.
Handling such forwarding in a full and generic manner would be quite
hard, so it is simpler to just handle those streams in the MJPEG decoder
directly.
The AVRN decoder, which now handles only the raw streams, can now be
marked as supporting direct rendering.
This also removes the last remaining internal use of the obsolete
decoding API.
This provides coverage for writing BlockGroups with BlockAdditional
and ReferenceBlock elements. It also tests setting the hearing impaired
disposition (it fits given that this video has no audio so one needs to
be able to read lips to understand anything).
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The FATE suite already contains a file containing mastering display
and content light level metadata: Meridian-Apple_ProResProxy-HDR10.mxf
This file is used to test both the Matroska muxer and demuxer.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The mxf_d10 muxer is very picky regarding the input it accepts:
The only video accepted is MPEG-2 with absolutely constant bitrate,
i.e. all packets need to have exactly the same size; and only a few
bitrates are accepted.
The sample file used did not abide by this: Writing the first packet
(a video packet) errors out and afterwards an audio packet from the
muxing queue has been written. That's all besides metadata (which this
test is about). The FFmpeg cli returned an error, but said error has
been ignored by the md5 test.
This commit changes the test to actually send a compliant stream to the
muxer, so that it does not error out; furthermore, the test is changed
to explicitly check the metadata instead of it only being implicitly
included in the md5 checksum. The compliant stream is created by our
encoder at runtime.
Finally, the test now also covers writing user-specified
product/company/version identification.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also, test modifying colorspace properties and the default_mode
passthrough which is used here to create a file that has no default
track at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It furthermore tests the demuxer's handling of chained SeekHeads,
level 1-elements after the Clusters and the muxer's capability of
writing huge TrackNumbers as well as expanding the Cues' length field
by one byte if necessary to fill the reserved space. It also tests
propagation of metadata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
No longer used by anything.
Unfortunately the old FFT_FLOAT/FFT_FIXED_32 is left as-is. It's
simply too much work for code meant to be all removed anyway.
The AC3 encoder used to be a separate library called "Aften", which
got merged into libavcodec (literally, SVN commits and all).
The merge preserved as much features from the library as possible.
The code had two versions - a fixed point version and a floating
point version. FFmpeg had floating point DSP code used by other
codecs, the AC3 decoder including, so the floating-point DSP was
simply replaced with FFmpeg's own functions.
However, FFmpeg had no fixed-point audio code at that point. So
the encoder brought along its own fixed-point DSP functions,
including a fixed-point MDCT.
The fixed-point MDCT itself is trivially just a float MDCT with a
different type and each multiply being a fixed-point multiply.
So over time, it got refactored, and the FFT used for all other codecs
was templated.
Due to design decisions at the time, the fixed-point version of the
encoder operates at 16-bits of precision. Although convenient, this,
even at the time, was inadequate and inefficient. The encoder is noisy,
does not produce output comparable to the float encoder, and even
rings at higher frequencies due to the badly approximated winow function.
Enter MIPS (owned by Imagination Technologies at the time). They wanted
quick fixed-point decoding on their FPUless cores. So they contributed
patches to template the AC3 decoder so it had both a fixed-point
and a floating-point version. They also did the same for the AAC decoder.
They however, used 32-bit samples. Not 16-bits. And we did not have
32-bit fixed-point DSP functions, including an MDCT. But instead of
templating our MDCT to output 3 versions (float, 32-bit fixed and 16-bit fixed),
they simply copy-pasted their own MDCT into ours, and completely
ifdeffed our own MDCT code out if a 32-bit fixed point MDCT was selected.
This is also the status quo nowadays - 2 separate MDCTs, one which
produces floating point and 16-bit fixed point versions, and one
sort-of integrated which produces 32-bit MDCT.
MIPS weren't all that interested in encoding, so they left the encoder
as-is, and they didn't care much about the ifdeffery, mess or quality - it's
not their problem.
So the MDCT/FFT code has always been a thorn in anyone looking to clean up
code's eye.
Backstory over. Internally AC3 operates on 25-bit fixed-point coefficients.
So for the floating point version, the encoder simply runs the float MDCT,
and converts the resulting coefficients to 25-bit fixed-point, as AC3 is inherently
a fixed-point codec. For the fixed-point version, the input is 16-bit samples,
so to maximize precision the frame samples are analyzed and the highest set
bit is detected via ac3_max_msb_abs_int16(), and the coefficients are then
scaled up via ac3_lshift_int16(), so the input for the FFT is always at least 14 bits,
computed in normalize_samples(). After FFT, the coefficients are scaled up to 25 bits.
This patch simply changes the encoder to accept 32-bit samples, reusing
the already well-optimized 32-bit MDCT code, allowing us to clean up and drop
a large part of a very messy code of ours, as well as prepare for the future lavu/tx
conversion. The coefficients are simply scaled down to 25 bits during windowing,
skipping 2 separate scalings, as the hacks to extend precision are simply no longer
necessary. There's no point in running the MDCT always at 32 bits when you're
going to drop 6 bits off anyway, the headroom is plenty, and the MDCT rounds
properly.
This also makes the encoder even slightly more accurate over the float version,
as there's no coefficient conversion step necessary.
SIZE SAVINGS:
ARM32:
HARDCODED TABLES:
BASE - 10709590
DROP DSP - 10702872 - diff: -6.56KiB
DROP MDCT - 10667932 - diff: -34.12KiB - both: -40.68KiB
DROP FFT - 10336652 - diff: -323.52KiB - all: -364.20KiB
SOFTCODED TABLES:
BASE - 9685096
DROP DSP - 9678378 - diff: -6.56KiB
DROP MDCT - 9643466 - diff: -34.09KiB - both: -40.65KiB
DROP FFT - 9573918 - diff: -67.92KiB - all: -108.57KiB
ARM64:
HARDCODED TABLES:
BASE - 14641112
DROP DSP - 14633806 - diff: -7.13KiB
DROP MDCT - 14604812 - diff: -28.31KiB - both: -35.45KiB
DROP FFT - 14286826 - diff: -310.53KiB - all: -345.98KiB
SOFTCODED TABLES:
BASE - 13636238
DROP DSP - 13628932 - diff: -7.13KiB
DROP MDCT - 13599866 - diff: -28.38KiB - both: -35.52KiB
DROP FFT - 13542080 - diff: -56.43KiB - all: -91.95KiB
x86:
HARDCODED TABLES:
BASE - 12367336
DROP DSP - 12354698 - diff: -12.34KiB
DROP MDCT - 12331024 - diff: -23.12KiB - both: -35.46KiB
DROP FFT - 12029788 - diff: -294.18KiB - all: -329.64KiB
SOFTCODED TABLES:
BASE - 11358094
DROP DSP - 11345456 - diff: -12.34KiB
DROP MDCT - 11321742 - diff: -23.16KiB - both: -35.50KiB
DROP FFT - 11276946 - diff: -43.75KiB - all: -79.25KiB
PERFORMANCE (10min random s32le):
ARM32 - before - 39.9x - 0m15.046s
ARM32 - after - 28.2x - 0m21.525s
Speed: -30%
ARM64 - before - 36.1x - 0m16.637s
ARM64 - after - 36.0x - 0m16.727s
Speed: -0.5%
x86 - before - 184x - 0m3.277s
x86 - after - 190x - 0m3.187s
Speed: +3%
Do it only when requested with the AV_CODEC_EXPORT_DATA_VIDEO_ENC_PARAMS
flag.
Drop previous code using the long-deprecated AV_FRAME_DATA_QP_TABLE*
API. Temporarily disable fate-filter-pp, fate-filter-pp7,
fate-filter-spp. They will be reenabled once these filters are converted
in following commits.
One of the inputs to the fate test has an rgba pixel format which needs
to be converted to rgb32 (argb on big-endian) for the hqx filter. Because auto
scaling in the fate test is disabled, this needs a separate scale
filter.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
It depends on the muxer generating the timestamps, which is deprecated
and scheduled for removal on next bump.
A bunch of tests change timestamps, because of ffmpeg.c is not
generating them correctly. This should be fixed later.
While the FATE suite contains a sample file for Musepack 8, it did not
use it to test the decoder; it is only used in the mpc8-demux test that
tests the demuxer via streamcopy. Therefore this commit adds an actual
encoder test.
The test uses the framecrc output, because Musepack SV8 is an encoder
that returns multiple frames for a single packet, so that timing
information in the test output is valueable. Output seeking has been
used in order to limit the size of the ref file as well as to test this
codepath for the first time.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
av1dec should no longer attempt to output empty frames if another decoder
was used for probing and it sucessfully set a pix_fmt ever since 05872c67a4,
so we can re-add the AV_CODEC_CAP_AVOID_PROBING cap.
Signed-off-by: James Almer <jamrial@gmail.com>
changes since v1:
- made into fate test
- fixed c90 warnings
- tests more intermediate formats
- tested on BE mips too
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Filters mostly work in native endianness, but they must output
a specified endianness, usually little: that requires a final
conversion for big endian.
I do not know what's the deal with gif-deal: inserting explicitly
the filters that are implicitly inserted result in less frames in
output. Probably a strange problem of duration.
This is utilized by various media ingests to figure out the bit
rate of the content you are pushing towards it, so write it for
video, audio and subtitle tracks in case at least one nonzero value
is available. It is only mentioned for timed metadata sample
descriptions in QTFF, so limit it only to ISOBMFF (MODE_MP4) mode.
Updates the FATE tests which have their results changed due to the
20 extra bytes being written per track.
Explicitly insert the scale or aresample filter where it would
have been inserted by the negotiation.
Re-enable conversions if it cannot be done easily.
If a conversion is needed in a test, we want to know about it.
If the negotiation changes and makes new conversion necessary,
we want to know about it even more.
The dvbsubtest_filter.ts sample is a filtered version of the Videolan
sample database (samples/sub/dvbsub/dvbsubtest.ts) using Project X. It
originates from ticket #8844.
Previously, the hls-fmp4 and hls-fmp4_ac3 tests used the same file
names for init and segment files, which occasionally could cause
corruption and failed tests, if the input files for both tests are
generated in parallel, as they could overwrite each other.
This happened to work some of the time, as the fmp4_ac3 test actually
only checked the init segment file (which the fmp4 test case never
wrote, due to using the incorrect hls_segment_type option) and the
fmp4 test case always regenerated the input files due to mismatched
target and file names.
Signed-off-by: Martin Storsjö <martin@martin.st>
Previously, with the file name not matching the target, the files
were regenerated every time fate is rerun - contrary to the other
test targets in the same file. (While regenerating it every time
might be desireable, as that's what the test is about, the file
at least has a dependency on the ffmpeg executable, making them
regenerated every time the executable is updated - and this change
at least makes it consistent with the rest.)
Signed-off-by: Martin Storsjö <martin@martin.st>
Will prevet FATE from breaking once LIBAVCODEC_VERSION_MINOR is bumped to 100.
Reported-by: zane
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
add probeaudiostream for get audio stream's codec_name,codec_time_base,
sample_fmt,channels and channel_layout.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
changes since v1
- default behavior, no longer hidden behind decoder parameter
- updated tests to reflect change
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Matroska muxer writes the Chapters early when chapters were already
available when writing the header; in this case any tags pertaining to
these chapters get written, too.
Yet if no chapters had been supplied before writing the header, Chapters
can also be written when writing the trailer if any are supplied. Tags
belonging to these chapters were up until now completely ignored.
This commit changes this: Writing the tags belonging to chapters has
been moved to mkv_write_chapters(). If mkv_write_tags() has not been
called yet (i.e. when chapters are written when writing the header),
the AVIOContext for writing the ordinary Tags element is used, but not
output, as this is left to mkv_write_tags() in order to only write one
Tags element. Yet if mkv_write_tags() has already been called,
mkv_write_chapters() will output a Tags element of its own which only
contains the tags for chapters.
When chapters are available initially, the corresponding tags will now
be the first tags in the Tags element; but the ordering of tags in Tags
is irrelevant anyway.
This commit also makes chapter_id_offset local to mkv_write_chapters()
as it is used only there and not reused at all.
Potentially writing a second Tags element means that the maximum number
of SeekHead entries had to be incremented. All the changes to FATE
result from the ensuing increase in the amount of space reserved for the
SeekHead (21 bytes more).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
We won't be able to seek back to write the actual duration anyway.
FATE-tests using the md5pipe command had to be updated due to this change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
have tested on linux x86_32/64, mingw32/64 arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Tested on x86-32/64, mingw32/64, arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Several EBML Master elements for which a good upper bound of the final
length was available were nevertheless written without giving an
upper bound of the final length to start_ebml_master(), so that their
length fields were eight bytes long. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Moreover, putting the Cues in front of the Clusters by reserving space
in advance is also tested.
The new capability of using ffprobe during a remux/transcode test are
used here for information about the chapters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using random values for TrackUID and FileUID (as happens when the
AVFMT_FLAG_BITEXACT flag is not set) has the obvious downside of making
the output indeterministic. This commit mitigates this by writing the
potentially random values with a fixed size of eight byte, even if their
actual values would fit into less than eight bytes. This ensures that
even in non-bitexact mode, the differences between two files generated
with the same settings are restricted to a few bytes in the header.
(Namely the SegmentUID, the TrackUIDs (in Tracks as well as when
referencing them via TagTrackUID), the FileUIDs (in Attachments as
well as in TagAttachmentUID) as well as the CRC-32 checksums of the
Info, Tracks, Attachments and Tags level-1-elements.) Without this
patch, there might be an offset/a size difference between two such
files.
The FATE-tests had to be updated because the fixed-sized UIDs are also
used in bitexact mode.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
containing updated extradata, in this case a new FLAC streaminfo.
Furthermore, it also tests that the Matroska muxer is able to preserve
uncommon channel layouts by adding Vorbis comments to the CodecPrivate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It might be used by the Matroska muxer. This is also the reason why the
FATE-tests for muxing WavPack into Matroska needed to be updated: They
now write the correct version 4.07 and not 4.03 as before.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkvmerge versions 6.2 to 40.0 had a bug that made it not propagate the
WavPack extradata (containing the WavPack version) during remuxing from
a Matroska file; currently our demuxer would treat every WavPack block
encountered as invalid data (unless the WavPack stream is to be
discarded (i.e. the streams discard is >= AVDISCARD_ALL)) and try to
resync to the next level 1 element.
Luckily, the WavPack version is currently not really important; so we
fix this problem by assuming a version. David Bryant, the creator of
WavPack, recommended using version 0x410 (the most recent version) for
this. And this is what this commit does.
A FATE-test for this has been added.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until e7ddafd5, the Matroska muxer wrote two SeekHeads: One at the
beginning referencing the main level 1 elements (i.e. not the Clusters)
and one at the end, referencing the Clusters. This second SeekHead was
useless and has therefore been removed. Yet the SeekHead-related
functions and structures are still geared towards this usecase: They
are built around an allocated array of variable size that gets
reallocated every time an element is added to it although the maximum
number of Seek entries is a small compile-time constant, so that one should
rather include the array in the SeekHead structure itself; and said
structure should be contained in the MatroskaMuxContext instead of being
allocated separately.
The earlier code reserved space for a SeekHead with 10 entries, although
we currently write at most 6. Reducing said number implied that every
Matroska/Webm file will be 84 bytes smaller and required to adapt
several FATE tests; furthermore, the reserved amount overestimated the
amount needed for for the SeekHead's length field and how many bytes
need to be reserved to write a EBML Void element, bringing the total
reduction to 89 bytes.
This also fixes a potential segfault: If !mkv->is_live and if the
AVIOContext is initially unseekable when writing the header, the
SeekHead is already written when writing the header and this used to
free the SeekHead-related structures that have been allocated. But if
the AVIOContext happens to be seekable when writing the trailer, it will
be attempted to write the SeekHead again which will lead to segfaults
because the corresponding structures have already been freed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The WebM DASH Manifest muxer can write manifests for live streams and
these contain an entry that depends on the time the manifest is written;
an AVOption to make the output reproducible has been added for tests.
But this is unnecessary, as there already is a method for reproducible
output: The AVFMT_FLAG_BITEXACT-flag of the AVFormatContext. Therefore
this commit removes the custom option.
Given that the description of said option contained "private option -
users should never set this" and that it was not documented in
muxers.texi, no deprecation period for this option seemed necessary.
The commands of the FATE-tests for this muxer have been changed to no
longer use this option.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Utilizes a subpicture sample with one decodable subpicture for the
test.
Based on a failing test case in reported by Michael in
https://ffmpeg.org/pipermail/ffmpeg-devel/2019-February/240398.html
which at the time had no test case for it.
Additionally, this is the first test case for the presentation
graphics format.
When a Matroska Block is only stored in compressed form, the size of
the uncompressed block is not explicitly coded and therefore not known
before decompressing it. Therefore the demuxer uses a guess for the
uncompressed size: The first guess is three times the compressed size
and if this is not enough, it is repeatedly incremented by a factor of
three. But when this happens with lzo, the decompression is neither
resumed nor started again. Instead when av_lzo1x_decode indicates that x
bytes of input data could not be decoded, because the output buffer is
already full, the first (not the last) x bytes of the input buffer are
resent for decoding in the next try; they overwrite already decoded
data.
This commit fixes this by instead restarting the decompression anew,
just with a bigger buffer.
This seems to be a regression since 935ec5a1.
A FATE-test for this has been added.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This test tests that demuxing ProRes that is muxed like it should be in
Matroska (i.e. with the first header ("icpf") atom stripped away) works;
it also tests bz2 decompression as well as the handling of
unknown-length clusters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
In these cases, we must pass the full path of the file to ffprobe
(as the current working dir on the remote system, e.g. when invoked
with "ssh remote ffprobe ..." isn't the wanted one).
The input filename passed to ffprobe is also included in the output,
which is part of the reference test data. Add a new option to
ffprobe to allow overriding what path is printed, to keep the
original relative path in the tests.
An alternative approach could be an option to allow requesting omitting
the file name from the dumped data, and updating the test references
accordingly.
Signed-off-by: Martin Storsjö <martin@martin.st>
