Said table is 64 bytes long and exported so that it can be used both
in libavcodec and libavformat. This commit stops doing so and instead
duplicates it for shared builds, because the overhead of exporting the
symbol is bigger than 64 bytes. It consists of the length of the name of
the symbol (2x24 bytes), two entries in .dynsym (2x24 bytes), two
entries for symbol version (2x2 bytes), one hash value in the exporting
library (4 bytes) in addition to one entry in the importing library's
.got and .rela.dyn (8 + 24 bytes).
(The above numbers are for a Linux/GNU/Elf system; the numbers for other
platforms may be different.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Commit 36e156bef0 ("avformat/spdifenc: fix handling of large TrueHD
frame") added an obviously incorrect bitshift that caused incorrect
samples-per-frame calculation for TrueHD streams over 48kHz.
Fix that.
The TrueHD IEC 61937 encapsulation code uses a very naive method of
always inserting 24 TrueHD frames evenly in a MAT frame. This does not
work for larger frames as they may exceed the size of 1/24th of a MAT
frame.
To fix that, use the input_timing field in the TrueHD frame to determine
the proper position of the TrueHD frame in the MAT frame. That field is
basically a dts field, telling the time to feed this frame to the
decoder in sample count units.
This can cause a TrueHD frame to be split between two MAT frames, so a
second concatenation hd_buf is added, alternating with the first buffer.
Large frames are preceded by smaller frames that have input_timing
values that cause the frames to be sent out faster than the nominal rate
(i.e. increasing decoder latency, long decoder buffer), allowing the
larger frames to then be sent out slower than the nominal rate as the
decoder has enough data buffered to keep it busy.
This is preparation for adding a second hd_buf in a followup commit.
Also, slightly improve the comments for hd_buf_x members to clarify
which ones are actually used and kept up-to-date depending on which
codec is being muxed.
The write_trailer function doesn't write anything anyway. It only frees
memory.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Such streams are found on Blu-ray, and identified as EAC3 type in
avformat, while the bitstream of the core stream is actually a pure AC3
frame.
Adjust the parsing accordingly, since AC3 frames always hold 6 blocks
and the numblkscod syntax element is not present.
* commit 'b5f19f7478492307e4b4763aeac3180faf50e17f':
aac: Split function to parse ADTS header data into public and private part
Merged-by: James Almer <jamrial@gmail.com>
This makes the currently semi-public avpriv_aac_parse_header() function
private to libavcodec and adds a proper public API function to return
the parts of the ADTS header required in libavformat.
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
* commit '25f613f8be3b51e4396b93cda131e4631ba54302':
dca: Move syncword definitions to a separate header
Conflicts:
libavcodec/dca_parser.c
libavformat/dtsdec.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Since 596e5d4783, this is not necessary anymore. It also allows to
actually disable the flushing, improving write performance (but
possibly giving worse latency in real-time streaming).
Signed-off-by: Martin Storsjö <martin@martin.st>
* commit 'a4472ac01e86f9fae5adb9034f2777b86a9c5480':
Add informative messages to av_log_ask_for_sample calls lacking them
anm: Get rid of some very silly goto statements
Conflicts:
libavformat/anm.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit 'd58dd4b5b5d31cfd4092e38a5f2c894eee2ab078':
avopt: Store defaults for AV_OPT_TYPE_FLAGS in the i64 union member
Conflicts:
libavcodec/libvpxenc.c
libavcodec/options_table.h
libavfilter/vf_drawtext.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* commit '124134e42455763b28cc346fed1d07017a76e84e':
avopt: Store defaults for AV_OPT_TYPE_CONST in the i64 union member
Conflicts:
libavcodec/aacenc.c
libavcodec/libopenjpegenc.c
libavcodec/options_table.h
libavdevice/bktr.c
libavdevice/v4l2.c
libavdevice/x11grab.c
libavfilter/af_amix.c
libavfilter/vf_drawtext.c
libavformat/movenc.c
libavformat/options_table.h
libavutil/opt.c
Merged-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
dca: Switch dca_sample_rates to avpriv_ prefix; it is used across libs
ARM: use =const syntax instead of explicit literal pools
ARM: use standard syntax for all LDRD/STRD instructions
fft: port FFT/IMDCT 3dnow functions to yasm, and disable on x86-64.
dct-test: allow to compile without HAVE_INLINE_ASM.
x86/dsputilenc: bury inline asm under HAVE_INLINE_ASM.
dca: Move tables used outside of dcadec.c to a separate file.
dca: Rename dca.c ---> dcadec.c
x86: h264dsp: Remove unused variable ff_pb_3_1
apetag: change a forgotten return to return 0
Conflicts:
libavcodec/Makefile
libavcodec/dca.c
libavcodec/x86/fft_3dn.c
libavcodec/x86/fft_3dn2.c
libavcodec/x86/fft_mmx.asm
Merged-by: Michael Niedermayer <michaelni@gmx.at>
Also add missing trailing commas, break long codec_tag lines and
add spaces in codec_tag declarations.
Signed-off-by: Martin Storsjö <martin@martin.st>
