Based on patch from Tomas Härdin <tomas.hardin@codemill.se>
and work by Georg Lippitsch <georg.lippitsch@gmx.at>
Changed av_calloc to av_mallocz and added overflow checks.
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Signed-off-by: Martin Storsjö <martin@martin.st>
This check isn't relevant in the way the code currently works.
Also change a case of if (x == 0) into if (!x).
Signed-off-by: Martin Storsjö <martin@martin.st>
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a322, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Signed-off-by: Martin Storsjö <martin@martin.st>
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
Signed-off-by: Martin Storsjö <martin@martin.st>
The H.264 decoder needs SPS and PPS for initialization during
multi-threaded decoding. When probed single-threaded SPS and PPS are
copied to extradata and are available for proper initialization of
the decoder before the first frame is decoded.
This isn't used in practice anywhere within libav at the moment,
but change it for consistency until it is removed.
URL_RDONLY/WRONLY were fixed in commit 5b81e29593 (after the
values that actually were used were changed at the major bump,
in commit cbea3ac8), but this flag was unintentionally left unfixed.
Signed-off-by: Martin Storsjö <martin@martin.st>
If the creation time is stored in the file as a zero, the
mov demuxer skips exporting the creation time. Currently,
files muxed without a creation time get demuxed with a
Jan 1st 1970 creation timestamp.
Signed-off-by: Martin Storsjö <martin@martin.st>
rtsp.h relies on network.h and the latter conditionally defines fallback OS
structures that rely on configure tests, which are only run if networking
is enabled.
Align IEC 61937 length_code for DTS-HD so that
(length_code & 0xf) == 0x8. This is reportedly needed with some
receivers.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
The implicit network initialization is set to be removed in the
future, but is kept for compatibility. By not doing the implicit
initialization for non-network protocols, we avoid the warning
about avformat_network_init() not being called for these, where
it really doesn't make much sense.
Signed-off-by: Martin Storsjö <martin@martin.st>
This definition is in two files, since the definitions will move
to the private header at the next bump.
Signed-off-by: Martin Storsjö <martin@martin.st>
Fixes an invalid free() with ass in avi. The sample in bug 98 passes
parts of AVPacket.data as buffer for the AVIOContext. Since the packet
is quite large fill_buffer tries to reallocate the buffer before doing
nothing. Fixes bug 98.
The fate-h264-bsf-mp4toannexb failures were caused by an integer
overflow of the unneeded multiplication.
Inspired by patch by: Michael Niedermayer <michaelni@gmx.at>
According to draft-pantos-http-live-streaming-07, 6.3.4,
the duration of the last media segment in the playlist
should be used as initial minimum reload delay.
Signed-off-by: Martin Storsjö <martin@martin.st>
With the current default PES packet size, and very small audio bitrates,
audio packet duration gets too long. For players, which wait for a whole
audio packet (or more) it takes a very long time to start playing sound.
For 24kbps audio, one PES packet is about 1 second long. On Motorola STBs,
we observe about 3 second delay before the playback starts with the
default setting.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Do not assume the audio packets being always smaller than
DEFAULT_PES_PAYLOAD_SIZE.
Signed-off-by: Jindřich Makovička <makovick@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The 'fiel' atoms can be found in H.264 tracks clobbering the extradata.
MJPEG supports non field based extradata, and this data should be
preserved when copying.
This fixes demuxing of file where the first packet is not audio. Such files
are generated by our idroq muxer. It also fixes demuxing of audio only
idroq files.
Compared to just overwriting the old extradata, this has the
advantage of letting the decoder know exactly when the
extradata changed (otherwise it is changed immediately when the
new extradata packet is demuxed, even if there's old queued packets
awaiting to be decoded). This makes it easier for decoders to
actually react to the change, so they won't have to inspect
the extradata for each packet to see if it might have changed.
This works when sequentially playing a file with sample rate
changes, but if seeking past a new extradata packet in the
file, it obviously doesn't work properly. That case doesn't
work in flash player either, so it's probably ok not to handle
it.
Signed-off-by: Martin Storsjö <martin@martin.st>
Support Main Profile at High 1440 Level in MXF container,
using essence coding label from SMPTE RDD 9, table 6.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Audio header information might get scrambled and would not parse,
yet wsqva_read_packet would try to parse audio packets causing
segfaults such as floating point exception.
Fixes bugzilla #141.
Signed-off-by: Martin Storsjö <martin@martin.st>
This avoids a segfault if the probe function wasn't able to
determine the format.
The bug was found by Panagiotis H.M. Issaris.
Signed-off-by: Martin Storsjö <martin@martin.st>
v410 is a packed 10-bit 4:4:4 YCbCr format used in
QuickTime.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
It sets the supplied AVFormatContext pointer to NULL after freeing it,
which is safer and its name is consistent with other lavf functions.
Also deprecate av_close_input_file().
The existing functions defined in intfloat_readwrite.[ch] are
both slow and incorrect (infinities are not handled).
This introduces a new header with fast, inline conversion
functions using direct union punning assuming an IEEE-754
system, an assumption already made throughout the code.
The one use of Intel/Motorola extended 80-bit format is
replaced by simpler code sufficient under the present
constraints (positive normal values).
The old functions are marked deprecated and retained for
compatibility.
Signed-off-by: Mans Rullgard <mans@mansr.com>
If the sdp is generated before the rtp muxer is initialized
(e.g. as when called from the rtsp muxer), this has to be done,
otherwise the rtp muxer doesn't know that the input really is
in mp4 format.
Signed-off-by: Martin Storsjö <martin@martin.st>
If an annex b bitstream is muxed into mov, the actual written
sample is reformatted to mp4 syntax before writing.
Currently, the RTP hints that copy data from the normal video
track, where the payload data might be offset compared to the
original sample that the RTP hinting used (when 3 byte
annex b startcodes have been converted into 4 byte mp4 format
startcodes).
Signed-off-by: Martin Storsjö <martin@martin.st>
This implements reading the tag in the demuxer and adds support for writing it
in the muxer. Some example channel layout tables for muxing are included for
ac3, aac, and alac, but they are not utilized yet.
Use Sound Sample Description Version 2 for all MOV files.
Updated FATE references accordingly.
Note that ADPCM is treated as compressed audio in version 2.
704af3e29c broke publishing
of rtmp streams, at least publishing to Wowza servers.
This changes all invoke commands to use nb_invokes.
Signed-off-by: Martin Storsjö <martin@martin.st>
malloc() is allowed to return NULL when zero is the argument. This
causes us to think malloc has failed and return AVERROR(ENOMEM). In
addition OS X malloc() returns an unfreeable non-NULL pointer for size
zero when alignment is greater than 16.
